USA
Catalog   /   Camping & Fishing   /   Fishing   /   Reels

Comparison Salmo Sniper Spin 5 5220RD vs Salmo Sniper Spin 5 2120FD

Add to comparison
Salmo Sniper Spin 5 5220RD
Salmo Sniper Spin 5 2120FD
Salmo Sniper Spin 5 5220RDSalmo Sniper Spin 5 2120FD
from $19.27 up to $20.28
Outdated Product
from $19.27 up to $20.28
Outdated Product
TOP sellers
Typeinertialessinertialess
Number of bearings5 pcs5 pcs
Dragrearfront
Gear ratio5.5 rev5.5 rev
Spool size20002000
Spool capacity230/0.2 m/Ømm230/0.2 m/Ømm
Reel materialgraphitegraphite
Main spool materialaluminiumaluminium
Spare spool materialgraphitegraphite
Weight275 g252 g
Added to E-Catalogmarch 2016march 2016

Drag

The clutch type describes the location of the friction brake mechanism provided in the reel and, accordingly, its adjustment knob.

The friction brake itself is responsible for loosening the reel at a critical force: when the load increases significantly, a properly adjusted friction clutch pits part of the fishing line, preventing it from breaking. But the specific actuation force may differ: some fishermen prefer to loosen the brake as much as possible, allowing the line to slip with rather weak jerks, while others, on the contrary, tighten it, allowing operation only when dangerously approaching the breaking load. And in some situations, you need to change the settings right in the process of playing. The convenience of such a reconfiguration is one of the points that is affected by the type of clutch. In addition, design features may be due to the purpose of the coil. Specific options might be:

Front. Friction located directly in the drum, with an adjustment knob on the front of the reel. It is used in inertialess models (see "Type"). It is slightly lighter and simpler in design than the rear one, making it well suited for light tackle (for example, when fishing in a match). But the adjustment of such a brake, on the one hand, is smoother and more accurate than that of the rear one, on the other hand, it is not so convenient when setting it up on the fly and requires a certain skill....In addition, the front clutch is more sensitive to dirt.

— Rear. Another option for placing the clutch in inertialess models. Its name is due to the fact that the drag is located behind the spool, and the adjustment knob is on the back of the reel. Such coils allow you to easily reconfigure the brake right during the fight, and their balance is somewhat more convenient than that of the “front-wheel drive”, because. the design does not have a characteristic "overweight" forward. On the other hand, the adjustment in this case is less accurate, and the coils themselves are somewhat larger and heavier, which makes them poorly suitable for ultralight gear.

— Side. A similar placement of the clutch is typical for multiplier coils — it makes no sense to use other options in such models, as well as to put a side clutch in an inertialess model.

Weight

The total weight of the reel (only the device itself, without fishing line). This parameter is important, first of all, for those who select equipment of the ultralight class — in such gear, the struggle is, as they say, for every extra gram. In other cases, you can not pay special attention to weight.
Salmo Sniper Spin 5 2120FD often compared