Base
The type of base for which the table lamp socket is designed, and the number of such sockets — for example, marking 3xE14 means that the lamp has 3 sockets for the E14 base.
The number of "seats" for light bulbs is a fairly obvious parameter, we note only a few nuances. So, a larger number of light bulbs (ceteris paribus) allows you to achieve greater brightness and/or lighting area, and also gives a guarantee in case one of them burns out — the power of the lamp will decrease, but it will remain operational. At the same time, one light source is often enough for table lamps, and such models are simpler and more compact.
The most popular types of socles are as follows:
—
E27. The classic, most common type of round ("Edison") base — and in general the most popular version of the base in household lamps and light bulbs for them. If you do not have specific requirements for the form and functionality of a table lamp, it makes sense to pay attention primarily to models with such a cartridge. Firstly, the variety of light bulbs under E27 is very large, they can have a different type, power, brightness and colour of light; secondly, such bulbs are sold almost everywhere, and it is not difficult to find them.
—
E14. He's a minion. Reduced, compared to the E27 described above, a version of the round "Edison" base, has half the diameter (14 mm instead of 27 mm). Accordin
...gly, light bulbs for such a cartridge are also smaller and less powerful than light sources for E27. Among table lamps, the E14 base is used mainly in small-sized models where it is not possible to install a full-size E27.
— G4. Two-pin base with pin diameters from 0.65 to 1.05 mm and a spacing of 4 mm. It is mainly used for round or oblong halogen bulbs. In size, such bulbs are similar to those that use the E14 base (see above), but for a number of reasons they are much less common, like table lamps for the G4 base.
— G6. 2-pin base with approx. 6 mm spacing between pins. It is found mainly in halogen lamps, similar to G4.
— GY6.35. Another variation of the "6mm" two-pin base, with slightly thicker pins than the G6. Equipped with such bases are mainly halogen lamps, including with switchable power.
— G9. 2-pin base with 9 mm contact spacing. Mainly used for conventional halogen lamps; while the size of the base allows it to be used in larger and more powerful lamps than in the case of G4. However, this type of contact is considered quite specific and is relatively rare.
— G23. 2-pin base with 23 mm contact spacing and 2 mm pin diameter. Unlike the type G contacts described above, it is mainly used in fluorescent lamps with an elongated U-shaped bulb.
— GU10. 2-pin base with standard 10 mm contact spacing. It has bulges at the ends of the pins, designed to be fixed in the chuck by turning.
— G10q. A specific type of base used in fluorescent lamps that look like a ring. Not compatible with original G10.
— GU5.3. Two-pin base with a standard contact diameter of 1.4-1.6 mm and a distance between them of 5.33 mm. It is found mainly in LED lamps with a characteristic “dome” reflector.
— 2G7. Four-pin base, used in the same way as G23 described above — in compact fluorescent lamps with U-shaped bulbs. The difference between such lamps and models with G23, in addition to the number and shape of contacts, also lies in some features of the work.
— R7S. The R7s bases have a paired design: the lamp itself is made elongated, and at its ends there are two contacts recessed into the insulation. Accordingly, in the cartridges, where such a lamp is installed at both ends, there are metal pins that, when installed, reach the contacts. A rather specific type of base, most lamps under R7S are halogen quartz light sources of fairly high power. Therefore, among table lamps, this variant of distribution has not received.
— T5. A miniature two-pin base used primarily for small but bright LEDs. A cartridge for such a base is extremely rare, mainly among rather specific models — in particular, laboratory devices that combine a magnifying glass and a backlight on a movable leg.Maximum power
The maximum power of the light source allowed for a given lamp.
This parameter has different meanings depending on the light source (see the corresponding paragraph). It is most critical for models with sockets for replaceable light bulbs: the power of the light bulbs used should not exceed the maximum power of the lamp. Otherwise, it will overheat, and the consequences can be very unpleasant - even a fire. In this case, for models with several cartridges, the total power of all installed light sources is indicated. In order to determine the maximum permissible power of an individual light bulb, you need to divide the total limitation by the number of sockets. For example, in a model with 7 “seats” and a limit of 140 W, you can install bulbs of no more than 140/7 = 20 W.
It is also worth recalling that the actual brightness of the light bulb will depend not only on its power, but also on its type. Thus, at the same brightness, “energy-saving” fluorescent lamps have a power 3 to 5 times less than incandescent lamps, and LED light sources - 10 times less. Thus, low permissible power does not interfere with achieving high brightness.
As for table lamps with built-in LEDs, the maximum power for them corresponds to the actual power of the LED unit. You can roughly estimate the capabilities of such a lamp using the above formula - the brightness of the LED corresponds to the brightness of an incandescent lamp with 10 times more power. For example..., if you previously made do with a 60-watt light bulb, an 8-watt LED lamp will most likely be enough for you.
Wattage also determines the energy consumption of the lamp. However, it is not particularly high in table lamps, and in models with a replaceable socket, it also depends not on the maximum power of the lamp itself, but on the characteristics of the actually installed light bulbs.
Features
—
Brightness adjustment. Possibility to adjust the brightness of the lamp. The convenience of this function is generally obvious: it allows you to customize the lamp to suit your own preferences and specific situation. For example, for working with printed documents, brighter light may be useful, but for watching a movie on a laptop, the lighting can be dimmed. However, it is worth considering that not all replaceable light bulbs can work properly in lamps with dimmers. Therefore, in models with a cartridge (see “Light source”) this function is rare; and if you buy such a lamp, you should pay special attention to the choice of light sources for it.
—
Adjustment of color temperature. The ability to change the color temperature of the light produced by the lamp. For more information about color temperature, see the corresponding paragraph. This adjustment allows you to adjust the glow to a particular situation - for example, a high color temperature is desirable for reading, and a lower color temperature for rest and relaxation. Note that this setting should not be confused with adjusting the color of the glow (see below): in this case we are talking only about changing the overall hue of white light, and not about a full change in color.
—
Adjustment of glow color. Ability to change the color of the lamp. Note that this is not just about adjusting the c
...olor temperature (see the corresponding paragraph), but about changing the overall color of the glow; many models with this function allow you to produce almost any color from the palette visible to the human eye. This function is not needed when lighting a workplace, but it is very convenient for setting up general lighting and creating a certain atmosphere in the room.
— Shutdown timer. The timer automatically turns off the light after a user-specified time. This option can be useful in many situations, for example, before bed or for those who like to read in bed. The shutdown timer is set for a certain period of time, after which the lamp turns off automatically, which helps save energy and extends the life of the light source.
— Flexible leg. The presence of a flexible leg in the lamp design. The leg is the part that connects the light source to the stand or mount. Unlike a hinged body (see the corresponding paragraph), such a part can be bent anywhere and in any direction. This provides additional convenience when adjusting the position of the lamp: the freedom of movement of the flexible leg is noticeably higher than that of the hinges. True, it is considered less reliable and durable, but in practice a lot depends on the quality of workmanship; and with careful handling, even an inexpensive lamp with a similar feature can “live” for a very long time.
— Hinged body. Lamps with this feature consist of several sections connected by rotating hinges. The specific number of hinges and the design of such cases can be different - from a single rotary mount for connecting the light bulb with the leg to a system of 4 - 5 hinges, which allows you to adjust the position of the lamp within a fairly wide range. Compared to another version of the movable structure - a flexible leg (see the corresponding paragraph), the hinges are more expensive, more limited in mobility and more difficult to adjust. On the other hand, swivel mounts are considered more reliable and durable, and they can also be used in legs of any length.
— Display. The presence of its own screen in the lamp design. To use it for its main purpose in a traditional format (without additional adjustments), a display is not needed. Therefore, this feature is an unambiguous sign that we have a model with advanced functionality. The display most often displays the readings of a clock and a thermometer (see the corresponding paragraphs), but other information may also be provided - for example, the set color temperature, battery charge (if the lamp is self-powered), etc.
- Watch. The presence of its own clock in the lamp design. Theoretically, this could be a pointer dial built into the case, but in practice it is much more common to see watches displayed on their own display (see the corresponding paragraph). Moreover, this function can be supplemented with other capabilities related to timekeeping - for example, an alarm clock, stopwatch and/or timer, or even a calendar.
— Thermometer. The lamp has its own built-in thermometer. As a rule, such a thermometer is electronic, and its readings are displayed on the lamp display (see the corresponding paragraph). This function allows you to control the microclimate in the room, which can be useful from a practical point of view - for example, when adjusting air conditioning or heating.
— USB port. The lamp has a USB port from which you can charge various electronic devices: smartphones, tablets, players, external power banks, etc. The main convenience of this function is that the connector on the lamp is always at hand, while other accessible ports may be located in less convenient places (for example, on the back wall of the system unit under the table). True, the power supply in different models may be different; but this only affects charging speed, not compatibility.
- Wireless charger. A device for wireless charging of smartphones and other gadgets, built directly into the lamp - usually in the stand. This technology works over a short distance, and to use it, the device must be placed directly on a special platform mounted on a stand. Wireless charging is slower than wired charging and is not supported by all gadgets, but it is more convenient (no need to fiddle with plugs) and does not wear out the connectors. In lamps, this function is found mainly among models for study and office (see “Type”); it is also convenient because the platform can be used as a desktop stand for a smartphone - and the device will be charged, and not just lie idle.
- Remote control. Availability of a remote control included with the lamp. This feature is relevant for models with advanced functionality such as color adjustment or color temperature (see the corresponding paragraphs). It is often more convenient to control additional functions from an external remote control, not only because of the possibility of remote control, but also due to the fact that you can place the entire control panel on the remote control and not clutter the lamp body with unnecessary parts.
— Case lighting. The presence of additional lighting in the lamp body. The main role of this function is decorative; it gives the device a stylish appearance and can harmoniously complement the main lighting. In some models, the backlight can even be adjusted by color, although such an option may not be provided for the main light.
— Niche for office. The presence of a special place in the lamp for placing office supplies. Such a niche is usually located in a stand; its dimensions and capabilities may vary. So, the simplest option is a recess designed mainly for pens, pencils and markers. However, more often a more advanced design is used, with specialized “seats” for various items: holders for pens and pencils, shelves for business cards and stickers, trays for paper clips, erasers and other small items, etc. Lamp with a niche for an office, it can be a very good choice for an office or desk, a study place and other similar applications.
