Comparison Christopeit EL-5 vs USA Style SS-777

The maximum weight of the user for which the simulator is designed, in other words, the maximum weight of the athlete, at which the orbit track is guaranteed to work out the amount of time stated in the characteristics without the risk of breakage. This parameter should be adhered to as accurately as possible, do not be mistaken about the fact that 3-5 kg in excess of the calculated weight will not affect the device. Yes, most likely, the simulator will be able to work for some time, but it will experience loads exceeding the calculated ones, and at best it will fail earlier than expected, and at worst it may break at the most unfortunate moment, which is fraught with injuries. In addition, this case is usually not covered by the manufacturer's warranty, and you will have to eliminate the consequences at your own expense.

The design of the system that creates resistance on the flywheel of the orbit track and the corresponding load during training. The following options are currently in use:

— Mechanical. The operation of this system is similar to the brakes of a car: special brake pads are pressed against the flywheel, and by changing the force of pressing, the resistance to movement also changes. The advantages of mechanical loading systems are simplicity and low cost, reliability, the ability to create high resistance for large loads, as well as battery life — they do not require power, and in the design of the orbit track you can get by with a battery for auxiliary electronics (see "Power"). On the other hand, the pads, due to friction against the flywheel, create a certain noise, which can lead to inconvenience; they also wear and tear over time. The mechanical system is used mainly in low-cost orbitrek models.

— Magnetic. In systems of this type, the resistance changes due to permanent magnets: by bringing them closer to the flywheel or moving away from it, you can change the resistance to movement. Similar to mechanical ones (see above), magnetic load systems do not require power; at the same time they provide smoother adjustment and practically do not create noise. At the same time, this variety is poorly suited for training professionals — it is not capable of creating a serious load (although it...is usually quite enough for domestic use).

— Electromagnetic. This type of system is considered the most advanced. The principle of their operation is similar to magnetic ones (see above), however, instead of permanent magnets, stationary electromagnets are used in this case. The load, on the other hand, changes due to a change in the strength of the current passing through the windings of the electromagnets: the stronger the current, the stronger the magnetic field and, accordingly, the higher the resistance to movement. Thanks to this, electromagnetic models are able to provide very solid load levels, while maintaining one of the main advantages of magnetic systems — complete noiselessness. The main disadvantage is the need for a powerful power supply, which is realized either by connecting to the network or by installing a built-in generator (see "Power"). Yes, these trainers are quite expensive.

— Own weight. The load system allows you to work exclusively with the load of your own weight. The simplest mechanism, which has a minimum of nodes, is quite reliable and budgetary.

The weight of the flywheel installed in the orbitrek is a massive wheel, the rotation of which ensures the movement of the pedals and creates a load on them. It is believed that the more weight, the better: a massive flywheel provides smooth movement with a minimum of jerks and creates uniform loads that mimic natural ones as much as possible. This is especially important for athletes with a large body weight — from 100 kg and above. At the same time, it should be taken into account that the cost of the entire orbitrek directly depends on the weight of the flywheel, and for home non-professional use it is not always justified to look for a simulator with a very heavy wheel.

The number of fixed load levels (platform resistance during movement) provided for in the design of the orbitrek. The more such levels provided in the design, the wider the possibilities for adjusting the load and the more accurately it can be adjusted to the requirements of a particular user. At the same time, the abundance of adjustments accordingly affects the price.

Q-factor — the distance between the orbitrek pedals. Anatomically correct running ankles suggest a Q-factor between 50mm and 90mm. The exact value depends on the height and build of a particular user. Orbitrek with a Q-factor up to 90 mm allows you to remove excess stress from the joints of the legs. Of course, it must be taken into account that with the growth of the Q-factor, the load on the user's muscular system automatically increases. So, models with an indicator above 90 mm allow for more effective training. But at the same time, an anatomically incorrect position of the legs is assumed, which can adversely affect the health of the joints. If the user has any diseases associated with the joints, you should choose an orbitrek with an optimal Q-factor for your height and build (from 50 to 90 mm).

The maximum horizontal distance between the platforms of the orbit track, which determines, respectively, the length of the athlete's step when working on the simulator. It is believed that for people of average height, a step length of 400 – 500 mm is optimal, and many simulators are made with this calculation. At the same time, there are models with a variable stride length, which allows you to adjust it to the personal preferences of different users.

Anyway, the step length should be chosen depending on height, physique and personal preferences. Too small a step will lead to the fact that you have to mince, and the imitation of walking will turn into marking time, and too wide will lead to inconvenience and an unjustified increase in load without increasing efficiency. Ideally, it is advisable to test the simulator before buying — how comfortable you will be on it. This applies to both fixed and adjustable stride length.

The presence in the design of the orbitrek of height-adjustable legs. Each of these legs is independently adjustable, and they can be set to different lengths. This allows you to compensate for uneven floors and stably install the simulator in a horizontal position, at all points of support.

The number of training programs provided for in the design of the orbitrek. Different programs have different purposes — strengthening the cardiovascular system, maintaining physical fitness, burning fat, etc. At the same time, the operation of the programme relieves you of the need to manually set the parameters — this is done by the simulator. Accordingly, the more training programs the orbitrek has, the wider its capabilities and the more convenient the training. And some models may even provide the possibility of self-creation of programs.

Pulse-dependent is a type of training programme in which the load is adjusted depending on the heart rate (pulse) of the athlete. Simply put, you just need to set the desired frequency — and the simulator will automatically adjust all the training parameters so that this frequency is maintained for the required time.

The simplest version of the heart rate programme is the constant heart rate mode, when the heart rate is maintained at the same level throughout the entire workout. However, this set of such programs is not limited. As in the case of training, the wider this set, the more opportunities you have to choose the best option for each specific moment.