Comparison Ugoos X4Q Cube 16GB vs Ugoos X4Q Pro 32GB

The technology of broadcasting audio and video signals through a Wi-Fi connection. Widely used in Apple electronics, the media centre with AirPlay will make it easy to duplicate a “picture” on a TV, for example, from an iPhone or iPad. The main disadvantage of this technology compared to similar Miracast is the need for a local network with a wireless router.

A wireless technology that allows you to directly broadcast video and audio from one device to another directly over a Wi-Fi connection. At the same time, unlike AirPlay, transmission does not require a router and building a local network — it is enough that the receiver and transmitter are compatible with Miracast. One of the most popular ways to use this technology is to output a “picture” from a smartphone / tablet screen to a TV, and vice versa. A media centre or TV receiver with Miracast is useful if the TV itself does not support this function.

IPTV service support — broadcasting by the IP protocol, using computer networks (including the Internet).

This feature should not be confused with online TV: in fact, IPTV is a type of cable television, where not an antenna cable is used to transmit the signal, but network equipment. Otherwise, IPTV and cable TV are completely similar: broadcasting is carried out through the operator; the choice of channels is limited by the assortment presented by the operator; and additional charges may apply for access. At the same time, the possibilities of IPTV are much wider than those of traditional cable broadcasting. Most specialized applications have a Time Shift feature (see below); any excerpt of a recently watched broadcast can be re-watched; in addition, it is often also possible to rewind the broadcast to a point in time before the start of viewing (if you turned on such a TV later than you planned). Other features may be provided for additional convenience, such as favorite channel lists, parental guaid, etc.

HDMI is the most common modern interface for working with HD content and multi-channel audio. Video and audio signals with this connection are transmitted over a single cable, and the bandwidth in the latest versions ( HDMI 2.0 and HDMI 2.1) is enough to work with UltraHD resolution and even higher. Almost any modern screen (TV, monitor, etc.) with HD support has at least one HDMI input, which is why most media players and TV receivers have outputs of this type. However, there are also models without HDMI — these are mostly outdated or the most inexpensive solutions that use only analogue video interfaces. There are also models for several HDMI and in most cases one of these ports is for the incoming signal, while the HDMI ports differ in versions.

— v 1.4. The version presented back in 2009, however, does not lose popularity to this day. Supports 4K (4096x2160) video at 24 fps and Full HD at 120 fps; the latter, among other things, allows you to transfer 3D video over this interface. In addition to the original v 1.4, there are also improved versions v 1.4a and v 1.4b, where the possibilities for working with 3D have been further expanded.

-v 2.0. Version released in 2013. Among other things, it introduced the ability to work with 4K video at speeds up to 60 fps, compatibility with ultra-wide format 21: 9, as well as support for up to 32 channels and 4...audio streams simultaneously. HDR support was not originally included in this release, but was introduced in v 2.0a and further enhanced in v 2.0b; media players from this category can support both the original version 2.0 and one of the improved ones.

— v 2.1. 2017 version, also known as HDMI Ultra High Speed. Indeed, it provides a very solid bandwidth, allowing you to work even with 10K video at a speed of 120 fps; in addition, a number of improvements have been made to HDR support. Note that the full use of HDMI v 2.1 is possible only with a special cable, but the functions of earlier versions remain available when using conventional wires.

The number of USB-C connectors in the design of the device.

This interface differs from the full-sized USB host ports (see above) primarily in the design of the connector: it is much smaller and made double-sided (the plug can be inserted in either direction). There are also a number of notable differences regarding application specifics. The most common option is the same as for conventional USB — connecting external peripherals, primarily drives like flash drives and external HDDs. But for charging gadgets, such connectors are used extremely rarely. In some models, USB-C plays the role of a service input for managing settings from a computer (that is, it actually works in the USB slave format — see "Inputs"). Also, this connector may provide an Alternate Mode mode, when other interfaces are implemented through the USB-C hardware port — for example, DisplayPort or HDMI for video broadcasting, or Thunderbolt for connecting some accessories. In media players, this mode is practically not used yet, but in the future the situation may change.

Summing up, we can say that the features of using USB-C in each model should be clarified separately. As for the number, such connectors are rarely provided for more than one — this is quite enough in most cases.

LAN — connector for wired connection to the Internet and/or local area network using an Ethernet cable. A wired connection is not as convenient as Wi-Fi (see "Multimedia"), but it is considered more reliable and provides faster data transfer speeds. And the speed indicators depend on the device and can be 100 Mbps and 1 Gbps.

— AV output. Analogue output for video and audio transferring. Previously, due to the large size of the equipment, it consisted of 3 RCA jacks and was connected to the TV accordingly. Now the devices have become more compact and don't have free space on the case. Therefore, the AV output is a single headphone jack, to which a tee cable is already connected (check availability in the package). Since all components of the video signal are on the same cable, the picture quality and immunity to interference are low.

In this case, the term coaxial refers to a type of SP/DIF interface that uses an electrical cable with an RCA connector. This interface provides sound transmission, including multichannel, in digital format; at the same time, the electrical cable is more susceptible to interference than the optical one, but is not as fragile.

A variation of the SP/DIF audio interface that uses a TOSLINK fibre optic cable. Like the coaxial connector, the optical output uses a digital data transfer format and can work with multi-channel audio. At the same time, optical fibre requires rather delicate handling, but it is absolutely insensitive to electrical interference.