USA
Catalog   /   Computing   /   Input Devices   /   Keyboards

Comparison Hator Skyfall TKL PRO Wireless vs Hator Rockfall EVO TKL

Add to comparison
Hator Skyfall TKL PRO Wireless
Hator Rockfall EVO TKL
Hator Skyfall TKL PRO WirelessHator Rockfall EVO TKL
Outdated Product
from $129.99 
Outdated Product
TOP sellers
Main
Wired, Wireless and Bluetooth connectivity. Switches with the possibility of replacement.
No Key Rollover (unlimited number of simultaneously pressed keys)
ConnectionBluetooth / radio / wiredwired
Multi-Device
Cable length1.8 m1.8 m
Range10  
Typefor gamefor game
Form factorcompact (ANSI), without Num-blockcompact (ANSI), without Num-block
Keyboard
Key profilevysokyivysokyi
Key typeclassic typeclassic type
Switch technologymechanicaloptical-mechanical
Switches
Kailh Red (Linear) /Box/
Kailh Black (Linear)
Hot Swap
Anti-Ghosting
#KRON-KRON-KRO
Fn key
Features
Cyrillic colourtransparenttransparent
Volume controlfnfn
Built-in memory
Game mode
LightingRGBRGB
Lighting effects++
General
InterfaceUSBUSB
Power source
battery /2000 mAh/
Detachable cable
Braided cable
Waterproof
Metal structure
Size365x133x36 mm360x133x36 mm
Weight1140 g735 g
Color
Added to E-Catalogdecember 2022march 2020

Connection

Wired. Connection using a cable with one or another type of connector — most often USB, less often PS/2 or a proprietary plug (see "Connection interface"). Wired keyboards are notable for their low cost and overall convenience — in the sense that they do not require batteries and the operating time is unlimited. However the wire limits mobility; however, given that most often the keyboard is used in close proximity to the computer, this shortcoming cannot be called critical.

Radio. Wireless connection over the air, usually through a wireless adapter connected to a computer via a USB port. The main advantage of this option can be called the actual absence of a wire; while the communication range is usually several metres, which gives freedom of movement and even allows you to use the keyboard as a "computer remote control". On the other hand, wireless models are much more expensive than wired ones, and their operation requires separate power supply from batteries or a rechargeable battery, the charge of which is limited — accordingly, the continuous operation time is limited. Separately, we note that this option is designed mainly for stationary PCs; if a wireless keyboard is needed for a laptop, it is better to pay attention to Bluetooth models (see below).

Bluetooth. Another way to wir...elessly connect keyboards. Technically, Bluetooth is based on radio waves, but this technology has its own characteristics, so it is listed separately from the "normal" radio connection (see above). The main one of these features is that many models of modern electronics (almost all laptops and tablets, some PCs, etc.) are equipped with built-in Bluetooth modules, which allows you to connect such keyboards without using additional adapters. In addition, the range of such a connection is officially at least 10 m (in fact, of course, it depends on obstacles, interference, etc.). It is this option that will be optimal if you need a wireless keyboard for a Bluetooth-enabled device.

— Bluetooth / radio. Wireless keyboards that can connect both via Bluetooth and radio. See above for more details on each of these options. Also note here that such a keyboard is usually connected directly to a Bluetooth device (for example, a laptop), and if the computer does not support Bluetooth, you can connect a USB adapter to it and use a radio connection. Thus, the keyboard is as versatile as possible in connection. However, such versatility significantly affects the cost, and is required not so often; so this option is not widely used.

— Bluetooth / radio / wired. Keyboards that support all three connection methods described above. This is the most versatile option, giving the user the freedom to choose for different situations. For example, while playing a game or watching a movie, you can sit in a comfortable chair away from the screen by connecting the device wirelessly, and when typing or surfing the Internet, you can move to the table and use the wire, saving battery power. At the same time, such versatility is not often required and is expensive, so models with this type of connection are not popular either.

Multi-Device

The keyboard's ability to quickly switch between multiple devices. Multi-Device allows you to simultaneously work with a tablet, TV, and other devices with one keyboard.

Range

The range of the wireless connection provided by the keyboard (see "Connection Type").

Almost all modern wireless models work confidently at a distance of at least 2 - 3 meters. So you need to pay attention to this parameter mainly when the keyboard is planned to be used at a greater distance from the computer. At the same time, when evaluating the range, it should be borne in mind that it is indicated for ideal conditions: the absence of interference and obstacles in the signal path, the battery is fully charged, etc. In practice, the communication range may be somewhat less, so when choosing, it is worth taking a certain margin. Nevertheless, according to the declared range, it is quite possible to evaluate the practical capabilities of different models and compare them with each other.

Switch technology

Membrane. The name of this type is due to the fact that the contacts under each key are made in the form of two membranes — conductive disks on a flexible film. The return of the keys to their original position after pressing is ensured by the elasticity of the membranes. This design is characterized by low cost and low noise level; in addition, such keyboards are quite resistant to liquid spills (although this is still not recommended). Of the shortcomings, it is worth noting the relatively low durability — 3-4 times lower than that of mechanical ones. In addition, as the keys of this type wear out, the force required to press decreases, they begin to “fall through” under the fingers (“fatigue effect”).

Mechanical. In this design, springs are used to return the key to its original position after being pressed. Mechanical keyboards are considered more advanced than membrane keyboards: they are more reliable and durable, almost do not lose properties as they wear out, and give a clear tactile feedback. The overall noise level is often higher than that of membrane ones, however, many attribute a characteristic click with each press to the advantages of such models; in addition, completely silent mechanical switches are also available. But of the unequivocal disadvantages, one can name the high cost and sensitivity to spilling liquid (although a mechanical keyboard can also be made waterproof)....r>
Optical-mechanical. A variation of the mechanical keyboards described above, in which each key is equipped not with a traditional pair of contacts, but with an optical switch in the form of a sensor that receives an infrared beam; when you press the key, this beam is blocked, which serves as a signal for operation. One of the key advantages of such switches is a very high response speed (fractions of a millisecond); this moment is not critical for domestic use, but it can be fundamental for gamers-enthusiasts and e-sportsmen. In addition, the absence of electrical contacts that are prone to wear and oxidize has a positive effect on durability. And although initially the “optics” are more complicated than classic systems with contacts, however, in gaming keyboards, optical-mechanical switches are often even cheaper than pure “mechanics”. And the fact that this option is relatively rare is primarily due to the fact that optical technology appeared not so long ago and is only gaining popularity.

Membrane + mechanical. A layout in which most of the keys have a membrane design, and some, the most "responsible" ones, are mechanical. About the features of both options, see above, and a similar combination of them is found mainly in gaming keyboards. In this case, the "mechanics" are usually used on the traditional combination of WASD plus on the surrounding keys Q, E, R and F.

— Mechanical-membrane. A hybrid design that combines elements of mechanical and membrane keyboards (see above for more on both). In this case, these features are combined in each individual key. Usually, under each button in such keyboards there is a membrane, however, inside this membrane is not just a pair of contacts, but a mechanical spring system. Thus, this design combines the advantages of both options. At the same time, mechanical-membrane systems are very expensive. Therefore, their main scope is high-end gaming keyboards, and even among such devices this option is quite rare.

— Scissor. A slightly modified version of membrane keyboards (see the relevant paragraph), in which the flexible membrane on each key is supplemented by a two-piece mechanism fastened together in the form of scissors. One of the main features of scissor keyboards is the low key travel (noticeably lower than that of membrane keyboards). Also, this design is less demanding on accuracy, it allows you to achieve a clear pressing regardless of where the finger hit — in the centre or on the edge of the key. The service life of the "scissors" is large; they are more difficult to clean, however, they become dirty much more slowly than "membranes". Among the disadvantages of this option, a slightly increased noise level during operation can be noted — due to the clicking of scissor mechanisms.

Switches

The model of switches (switches) used in the keyboard - switching mechanisms installed under each individual key. These details are given if the design uses advanced mechanics, positioned as a better option than traditional switches. Mostly gaming keyboards are equipped with such mechanics.

The most popular switch brands in our time are Cherry MX, considered the "classic of the genre" for high-quality mechanics; Gateron, practically not inferior to him; not so advanced, but also cheaper Kailh and Razer, as well as ultra-budget Outemu. For all these brands, different types of switches have a different stem color, which can be used to determine the features of the keyboard. It is also worth saying that modern mechanical switches are divided into three main varieties: linear, tactile and clicky.

- Linear. Such solutions are closest to conventional membrane keyboards: the key travel is uniform along the entire length, with minimal resistance and the absence of a clear actuation point. There is an opinion that the linear "mechanics" is best suited for games where you have to deal with fast and frequent clicks; however, in practice, this moment largely depends on the personal tastes of the u...ser, nothing prevents the use of such keyboards for working with texts.

- Tactile. Switches with a clearly defined actuation point - a kind of barrier to the path of the key. Such a "barrier" allows you to clearly determine by touch whether the key has worked or not. Tactile keyboards are valued primarily by tech who have to type large volumes of texts.

- Tactile-auditory (Clicky). In such switches, the actuation point is felt not only by touch, but also by ear: the actuation of the key is accompanied by a clearly audible click, which is often compared to the sound of the keys of a typewriter. Due to this, this option is also very popular among users dealing with texts. Some people consider switches of this type not very suitable for games, since they are supposedly not very convenient for frequent, fast pressing; however, a quality Clicky switch is as good as a linear switch in this regard, and the choice depends solely on personal preference. But the unequivocal disadvantages of such keyboards include a rather loud click sound, which in some situations may be superfluous.

As for specific colors, here are their features:

- Red (red). Linear type switches with minimum resistance. They are popular, in particular, among professional gamers who deal with dynamic games and try by all means to speed up their reaction to gaming events. On the other hand, a low force increases the likelihood of accidentally pressing an unnecessary button.

— Black. Another type of linear switches. They have a tighter move compared to Red, which, on the one hand, requires a little more effort, on the other hand, minimizes the chance of accidentally pressing the wrong key.

Blue. Switches in clicky format, with tactile feedback and a click.

— Brown. Switches with tactile feedback, but no "click". The Brown action is great for when you want a keyboard with tactile feedback and at the same time you want to avoid unnecessary noise (although the sound is still louder than on a membrane keyboard). In addition, it is considered a good option for tech who are just starting to get acquainted with mechanical keyboards.

— Silver. Linear switches designed for maximum operating speed. They have a very low stroke - about 1 - 1.2 mm - as well as a very small pressing force, which contributes to high speed. At the same time, the use of such a keyboard requires a certain skill, since even a small effort from an accidental touch usually leads to the operation of a key.

Built-in memory

The presence in the keyboard of its own built-in memory.

This feature is found mainly in high-end models of game specialization(see "Intended use"). The built-in memory in such keyboards is mainly used to store user settings — for example, the set functions of programmable keys — as well as macros (sequences of commands that are activated by pressing one or two buttons). Anyway, the presence of its own memory means extended options for customizing the keyboard.

Power source

The type of power used in wireless keyboards. It can be a replaceable battery or its own built-in battery.

As replaceable batteries in modern keyboards, batteries or accumulators of the AA (“finger”) or AAA (“mini-finger”) format can be used. The main advantage of this power supply is the ability to quickly replace dead batteries with new ones — if there are any left, a few seconds are enough, and the keyboard is ready to work again. However, batteries are often not included and must be purchased separately. In addition, anyway, you have to buy new batteries as the old ones wear out — or fork out for rather expensive batteries and, possibly, a charger.

Built-in battery, in turn, relieves the user of the need to purchase batteries. On the other hand, in the event of a discharge, such a battery cannot be quickly replaced, and the only option to continue working is to charge it, which can take quite a long time.

Detachable cable

The presence of a removable cable in the design of the keyboard.

This feature provides, first of all, additional convenience in storage and transportation: it is easier to pack the removed cable than to wind and lay the wire attached to the keyboard. Another advantage is that if necessary, the complete cable can be replaced without changing the entire keyboard — for example, if it is damaged or if a longer cable is needed. However, these moments are not so often significant, so there are not so many keyboards with detachable cables.

Waterproof

Protecting the keyboard from spilling liquid on it. Most waterproof keyboards do not have a full-fledged sealed case and are designed to remain operational in the event of accidental contact with a relatively small amount of liquid (up to 200 mL) — for example, in the classic case of spilling coffee on the keyboard.
Hator Skyfall TKL PRO Wireless often compared
Hator Rockfall EVO TKL often compared