Thermaltake Toughair 110 (CL-P073-AL12BL-A)

leaning tower of pisa

Thermaltake TougHair 110 is a horizontal tower air cooler or, as it is also called, Top-Flow. There are two advantages over the classic vertical tower. Firstly, with a consistently large heat dissipation area (TDP 140 W), the height of the structure is reduced (only 11.4 cm). Secondly, the power subsystem of the motherboard and RAM are blown.

Copper heat pipes

By the way, you should not worry about compatibility with high-radiator RAM — only very tall "horned" modules, which are extremely rare, will not fit. Four copper heat pipes with a diameter of 6 millimetres are nickel-plated for corrosion protection. They have direct contact with the heat-distributing cover of the processor.

elegant outfit

The aluminium fins are slightly asymmetrical to reduce turbulence and even out airflow. To reduce physical stress on the curved tubes, a wire support has been added under the radiator. And the ugly soldered ends of the tubes are hidden under a decorative plate with the Thermaltake logo.

Silent turntable

The included 12cm fan rotates at speeds from a silent 500 rpm to a highly efficient 2000 rpm. At maximum speed, a powerful airflow of 58 CFM and a static pressure of 2.4 mm H2O are achieved. The resource of an operating time makes not less than 40K hours. You can install TougHair 110 on all current processor sockets: Intel LGA 1700, 1200, 1151, AMD AM4, AM3, FM2, etc. The only exceptions are semi-server Intel LGA 2066, 2011 and AMD TR4.