JBL Control 12C/T

JBL's Control 12 C/T is a full-range ceiling speaker consisting of 76 mm (3") wide-bandwidth cone driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 material, with a pre-attached blind-mount backcan for fast, easy installation.ApplicationsMusic cafesBusinessMusic systemsRetail storesMusic/paging systemsAirportsReception/waiti... moreng roomsIncludesControl 12C/T unitC-ring support backing plate(2) tile support rails (for 2ft [600mm] tile spans); note: optional MTC-48TR extension available for larger 4ft [1200mm] tile spans - sold separately)Cutout templatePaint shieldRemovable locking multi-pin connectorGrilleFeatures76 mm (3") full-range driverBlind-mount backcan for quick and easy installDual conduit/cable clampsCombined 70V/100V and low impedance direct operation20 Watts @ 8 Ω nominal setting15W multi-tap at 70V/100V68 Hz – 17 kHz bandwidth with wide 130° coverageAvailable in Black or White - please specify when orderingSpecificationsFrequency Range (-10 dB): 68 Hz –17 kHzPower Capacity (at low-Z): 40 Watts Continuous Program Power, 20 Watts Continuous Pink NoiseTransformer Taps: 15 W, 7.5 W, 3.8W @ 70V and 100V (and 1.9 W @ 70V only)Frequency Response (±3 dB): 95 Hz –15 kHzNominal Sensitivity: 84 dBNominal Coverage Angle: 130° conical coverageDirectivity Factor (Q): 9.8Directivity Index (DI): 7.4 dBRated Maximum SPL: 97 dB @ 1m (3.3ft) average, 103 dB peakNominal Impedance: 8 Ω (indirect/bypass 8 Ω setting)Full-Range Driver: 3" (76mm) with polypropylene cone, butyl rubber surround, Kapton™ voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extensionInput Connectors: Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm*)*Note: Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system’s ability to handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise Rating.Connector Wiring: Pin 1 =+ In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop ThruStrain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanismMaterials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated steel backcanSafety Agency: UL1480, UL2043, NFPA90 and NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systemsDimensions (Ø x D, from back of baffle): 196 x 138mm (7.7" x 5.4")Ceiling Cutout Size: Circular cutout with 6.7" (170mm) diameter (cardboard cutout template included)Ceiling Thickness Range: Up to 1.4" (35mm) with stock dog-ears. MTC-TCD thick ceiling dog-ears available for up to 2.2" (55mm) ceiling

JBL's Control 12 C/T is a full-range ceiling speaker consisting of 76 mm (3") wide-bandwidth cone driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 material, with a pre-attached blind-mount backcan for fast, easy installation.ApplicationsMusic cafesBusinessMusic systemsRetail storesMusic/paging systemsAirportsReception/waiti... moreng roomsIncludesControl 12C/T unitC-ring support backing plate(2) tile support rails (for 2ft [600mm] tile spans); note: optional MTC-48TR extension available for larger 4ft [1200mm] tile spans - sold separately)Cutout templatePaint shieldRemovable locking multi-pin connectorGrilleFeatures76 mm (3") full-range driverBlind-mount backcan for quick and easy installDual conduit/cable clampsCombined 70V/100V and low impedance direct operation20 Watts @ 8 Ω nominal setting15W multi-tap at 70V/100V68 Hz – 17 kHz bandwidth with wide 130° coverageAvailable in Black or White - please specify when orderingSpecificationsFrequency Range (-10 dB): 68 Hz –17 kHzPower Capacity (at low-Z): 40 Watts Continuous Program Power, 20 Watts Continuous Pink NoiseTransformer Taps: 15 W, 7.5 W, 3.8W @ 70V and 100V (and 1.9 W @ 70V only)Frequency Response (±3 dB): 95 Hz –15 kHzNominal Sensitivity: 84 dBNominal Coverage Angle: 130° conical coverageDirectivity Factor (Q): 9.8Directivity Index (DI): 7.4 dBRated Maximum SPL: 97 dB @ 1m (3.3ft) average, 103 dB peakNominal Impedance: 8 Ω (indirect/bypass 8 Ω setting)Full-Range Driver: 3" (76mm) with polypropylene cone, butyl rubber surround, Kapton™ voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extensionInput Connectors: Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm*)*Note: Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system’s ability to handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise Rating.Connector Wiring: Pin 1 =+ In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop ThruStrain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanismMaterials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated steel backcanSafety Agency: UL1480, UL2043, NFPA90 and NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systemsDimensions (Ø x D, from back of baffle): 196 x 138mm (7.7" x 5.4")Ceiling Cutout Size: Circular cutout with 6.7" (170mm) diameter (cardboard cutout template included)Ceiling Thickness Range: Up to 1.4" (35mm) with stock dog-ears. MTC-TCD thick ceiling dog-ears available for up to 2.2" (55mm) ceiling