JBL Control 60PS/T

Designed for use in high-fidelity sound systems, the Control 60PS/T pendant subwoofer loudspeakers from JBL provide bass extension and high impact in a wide range of settings including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range, high-quality foreground/background music sys... moretems are at play. They feature 150 Watt power-handling with low distortion, and their long-excursion 200 mm (8") low-frequency drivers feature butyl rubber surround for a tight, well-damped sound quality as well as long-term dependability, plus a polypropylene-coated cone for humidity protection. The high-temperature 50mm (2") voice coil and low-mass fiberglass coil former work to ensure quality bass transient response along with excellent stability under high-power, high duty cycle working conditions. Available in either Black or White.Please note: these are priced as each—packaged and sold in pairs.Includes(2) C60PS/T units(2) suspension cable systems (see “suspension”)(6) removable locking 2-pin euroblock connectors(6) rubber cover boots for euroblock connectorsFeaturesHigh impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers8" (200mm) long-excursion driver8 Ω (150 Watt) and 70V/100V (100 Watt) operationHanging hardware with 4.5m (15ft) galvanized steel cable and easy to adjust clampStylish designUL listed (speaker and hanging cable system)SpecificationsFrequency Range (-10 dB): 42 Hz – 350 HzFrequency Response (+/- 3 dB): 55 Hz – 125 HzPower Capacity:300 Watts Continuous Program Power, 100 hrs150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m): 88 dBRated Maximum SPL: 107 dB @ 1 m (3.3ft) average, 113 dB peakRated Impedance: 8 ΩTransformer Taps: 110W, 55W, 30W (& 15W @70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8)Transformer Insertion Loss: 0.98 dB @ 15W, 0.99dB @ 30W, 0.94 dB @55W, 1.10 @ 110WStandalone Hookup: Connect to Input connector; built-in low-pass filter permanently engaged.Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite Hookup: For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16)Transducer: 8" (200mm) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2") high-temperature copper voice coil, vented fiberglass resin voice coil former.Enclosure Material: High impact polystyreneGrille: Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting)Environmental: