Catalog   /   Kids & Toys   /   RC Models   /   Drones   /   HappyModel

HappyModel Mobula8

Photos - Drone HappyModel Mobula8
Photos 7
HappyModel Mobula8
Camera:removable
Dimensions:120x120x45 mm
Weight:80 g
Family of drones based on the HappyModel Mobula8 frame.

A compact FPV drone with a modular design, introduced in 2025 and aimed at pilots who value flexibility in equipment choice and the ability to customize according to personal preferences. Its body, measuring 120x120x45 mm and weighing only 80 grams, allows for maneuverability in confined spaces and the execution of dynamic tricks without the risk of severe damage upon collisions.

The power system is built on brushless EX1103 KV11000 motors, providing a rapid response to commands and sharp acceleration, which is crucial for racing disciplines and freestyle flying. The Gemfan Hurricane 2023 propellers, with a 52 mm diameter, are optimized for achieving a balance between efficiency and speed. The HappyModel Mobula8 quadcopter supports the ELRS protocol at a 2.4 GHz frequency, ensuring reliable low-latency communication and resistance to interference over significant distances.

A key advantage of this platform is the ability to install various video transmission systems — from budget analog to high-end digital solutions like DJI O3 Air, Walksnail Avatar HD Mini 1S Lite, or HDZERO Whoop Lite, allowing the drone to be adapted to specific tasks and budgets. The flight controller based on the STM32F405RGT6 and the 4-in-1 Blheli_S power controller are integrated into a compact stack, saving space and weight. The removable camera simplifies the replacement or upgrade of video equipment without the need for complete disassembly of the drone. Key features include a lightweight and compact design that excels in agility, flexibility in video system choices, and a powerful rapid-response motor setup, catering to high-speed races and freestyle enthusiasts.

All specifications
Specifications Mobula8
Main
FeaturesFPV drone
Camera
Camera typeremovable
Live video streaming
Flight modes and sensors
Sensorsgyroscope
Control and transmitter
Controlremote control only
Communication protocolELRS
Control frequency2.4 GHz
Motor and chassis
Motor typebrushless
Motor modelEX1103 KV11000
Number of screws4 pcs / Gemfan Hurricane 2023 /
Screw diameter52 mm
Battery
Batteries in the set1 pcs
General
Body backlight
Materialplastic
Dimensions120x120x45 mm
Weight80 g
Official Websitehappymodel.cn
Added to E-CatalogJune 2025
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog HappyModel 2026 - new arrivals, bestsellers, and the most relevant models HappyModel.

Buy HappyModel Mobula8

All prices 9 →
When you make a purchase through links on our site, we may receive a affiliate commission.

Happymodel Mobula8 Digital HD 2S 85mm Whoop FPV Racing Drone ELRS BNF with DJI O3 Air Unit / HDZero / Walksnial Digital

Notice for DJI O3 and Lite for DJI O3 Version now add TBS Receiver for option DJI O3 TBS Lite for DJI O3 TBS Aug 9t... moreh 2023VersionLite for DJI O3DJI O3HDZeroWalkSnailLite for DJI O3 TBSDJI O3 TBSReceiverOnboard UART ELRS RX ELRS V3 0Onboard UART ELRS RX ELRS V3 0Onboard UART ELRS RX ELRS V3 0Onboard UART ELRS RX ELRS V3 0External TBS CRSF Nano RXExternal TBS CRSF Nano RXSpecification The New Mobula8 Digital HD Micro FPV whoop comes with a new flight controller which is specific for Digital HD CINEWHOOP Built in UART ExpressLRS receiver and 12A 4IN1 BLheli S ESC The same Brushless motor and Gemfan 2023 propeller like the Mobula8 Analog version Comes With DJI O3 Walksnail avatar and HDZERO VTX option Smooth flight and High definition video transmission would bring us exited FPV experience Features Digital HD FPV experienceNew CrazyF405 ELRS HD flight controllerPowerful and SmoothUART ExpressLRS receiver Built in blackbox for Gyroflow and PID TuneMotorMode EX1103 11000KVConfigu ration 9N12PStator Diamter 11mmStator Length 3mmShaft Diameter Φ1 5mmMotor Dimension Dia Len Φ13 5mm 15 5mmWeight g 3 8gNo of Cells Lipo 1 2SPropellersWeight 0 88gMaterial PCPitch 2 3inchProps Dia 52 17mmCenter Thickness 5mmCenter Hole Dia 1 5mmFlight ControllerMCU STM32F405RGT6 168MHZ 1Mbyte FLASH GYRO Sensor BMI270 SPI connection Mount hole size 25 5mm 25 5mmPower supply 1 2S battery input DC 2 9V 8 7V Built in 12A each Blheli S 4in1 ESCBuilt in Serial ExpressLRS 2 4GBuilt in
Banggood.com
Delivery: in USA
Report
$99.99

Happymodel Mobula8 1-2S 85mm Micro FPV Racing Mobula 82 inch micro RC Drone Whoop for backyard freestyle

Notice 1 It comes with a new X12 ELRS Pro v1 1 flight controller onboard vtx and onboard uart elrs receiver are controlled b... morey ESP32 chip now you have a free set ofUART and you can flash single ExpressLRS firmware for the Mobula8 ELRS 2 The Mobula8 UART ELRS version of this product will be upgraded to Mobula8 UART ELRS V3 on November 1 2025 Click here to purchase Flight ControllerX12 ELRS Pro v1 1 AIO 5 IN 1 Flight controllerMCU STM32F411CEU6 100MHZ 512K FLASH ESP32 PICO D4Sensor ICM42688P SPI connection Mount hole size 25 5mm 25 5mmPower supply 1 2S battery input DC 2 9V 8 7V Built in 12A each Blheli S 4in1 ESCBuilt in Betaflight OSD SPI Control Built in 5 8G OpenVTX 0mw 400mw MSP control Built in UART ExpressLRS v3 0 0Built in voltage meter sensor voltage meter scale 110Built in current meter sensor current meter scale 470Onboard 4in1 ESCPower supply 1 2S LiPo LiPo HVCurrent 12A continuous peak 15A 3 seconds Support BLHeliSuite programmableFirmware target Z H 30Default protocol DSHOT300Bluejay firmware readyOnboard uart ExpressLRS 2 4GHz ReceiverPacket Rate option 50Hz 150Hz 250Hz 500HzExpressLRS Firmware version V3 0RF Frequency 2 4GHzAntenna SMD antennaTelemetry output Power 12dBmReceiver protocol Serial based CRSFCompatible with ExpressLRS V3 x x TX ModuleCould flash single ELRS receiver firmware by WifiExpressLRS firmware target Generic ESP32 2 4Ghz Rx and VTxOnboard 5 8g OPENVTXFirmware version OPENVTXSmartaudio v2 1PIT Mode support
Banggood.com
Delivery: in USA
Report
$117.99

Happymodel Mobula8 1-2S 85mm EX1103 KV11000 Micro FPV Whoop Drone, ELRS/Frsky/PNP - PNP(No Receiver) 7107865

Powerful Performance and Compact Design The Happymodel Mobula8 is a micro FPV whoop drone that delivers an exhilarating flyin... moreg experience. With its 1-2S capability and lightweight 85mm frame, this drone offers both power and agility., the Mobula8 is designed to provide endless fun. High-Performance EX1103 KV11000 Motors Equipped with the impressive EX1103 KV11000 motors, the Happymodel Mobula8 offers exceptional speed and responsiveness. These motors ensure smooth and precise control, allowing you to perform daring maneuvers and achieve thrilling flight experiences. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTXVTX Power up to 400mwELRS V2.0 (Default), provide firmware to support ELRS V3.0 EX1103 KV11000 motorsCaddxFPV Ant FPV cameraSmooth and powerfulCompatible with 1S-2S Lipo/LIHV battery Recommended Match (1)Jumper Bumblebee HALL/RDC50 ELRS 2.4G FPV Controller Compact & Full-Featured FPV (2)RadioMaster Pocket 2.4GHz 16CH ELRS/CC2500 Hall Gimbals Radio Controller for FPV Racing Drones Recommend 2S 450mah/550mah/650mah battery (Not include) GNB 450mAh 2S HV LiPo Battery 7.6V 80/160C XT30 Plug GAONENG/GNB 530mah 2S 7.6V HV 90C LiPo Battery XT30 Plug Specifications for happymodel mobula8: Brand Name: HappymodelItem Name: Mobula 8 Micro FPV 1-2S whoop droneWheelbase: 85mmSize: 120mm*120mm*50mmWeight: 43g Receiver option: 2.4G ELRS SPI (Support ELRS v2.0, provide firmware could compatible with ELRS v3.0)SPI Frsky D8/D16 not compatible with EMAX E6 radioSPI Flysky AFHDS2A Spare parts specifications: Motor Mode: EX1103 KV11000Configu-ration: 9N12PStator Diamter: 11mmStator Length:3mmShaft Diameter: Φ1.5mmMotor Dimension (Dia.*Len):Φ13.5mm*15.5mmWeight(g): 3.8gNo.of Cells(Lipo): 1-2S Propellers Weight: 0.88gMaterial: PCPitch: 2.3inchProps Dia: 52.17mmCenter Thickness: 5mmCenter Hole Dia: 1.5mm Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRX12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689 or ICM42688P(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1-2S battery input (DC 2.9V-8.7V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2ABuilt-in voltage detectionBuilt-in current sensor Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableFirmware target: Z_H_30 Default protocol: DSHOT300Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power:
Makerfire.com
Delivery: in USA
Report
$120.00

Happymodel Mobula8 UART ELRS V3 2S 85mm Micro FPV Whoop Drone BNF with X14 ELRS 5-IN-1 AIO EX1103 110000KV Motors

Features X14 ELRS 5 IN 1 AIO flight controller built in 2 4G ELRS V3 0 and OPENVTX VTX Power up to 400mw ELRS V3 0 Defau... morelt could flash elrs firmware for the receiver by wifi EX1103 KV110000 motors CaddxFPV Ant FPV camera Smooth and powerful Compatible for 2S Lipo LIHV battery Recommend 2S 450mah 550mah 650mah battery Not include Specifications Brand Name HappymodelModel Mobula8 UART ELRS V3Item Name 2S 85mm Micro FPV whoop droneWheelbase 85mmSize 120mm 120mm 50mmWeight 42gReceiver option 2 4GHz UART ExpressLRSMotorMode EX1103 KV11000Configu ration 9N12PStator Diamter 11mmStator Length 3mmShaft Diameter Φ1 5mmMotor Dimension Dia Len Φ13 5mm 15 5mmWeight g 3 8gNo of Cells Lipo 1 2SPropellersWeight 0 88gMaterial PCPitch 2 3inchProps Dia 52 17mmCenter Thickness 5mmCenter Hole Dia 1 5mmFlight controllerX14 ELRSAIO 5 IN 1 Flight controllerMCU STM32G473CEU6Gyro ICM42688PBlackbox memory 16MBSensor VoltageCurrentBEC 5V Max 2AUART UART 1 UART 2 UART 3 For RX UART 4 For VTX BetaFlight OSD AT7456ELAHCamera plug 0 8mm 3pinESC 12A continuousOPENVTX 5 8GHz 48 channels Max 400mWFC firmware target CRAZYBEEG473USB port SH1 0 4PinBattery connector XT30 or A30Mounting hole size 5mm x 25 5mmWeight 83g without power pigtail and VTX antennaOnboard 4in1 ESCPower supply 1 2S LiPo LiPo HVCurrent 12A continuous peak 15A 3 seconds Support BLHeliSuite programmableFirmware target Z H 30Default protocol DSHOT300Bluejay firmware readyOnboard uart E
Banggood.com
Delivery: in USA
Report
$119.99

Happymodel Mobula8 1-2S 85mm EX1103 KV11000 Micro FPV Whoop Drone, ELRS/Frsky/PNP - ELRS 7107852

Powerful Performance and Compact Design The Happymodel Mobula8 is a micro FPV whoop drone that delivers an exhilarating flyin... moreg experience. With its 1-2S capability and lightweight 85mm frame, this drone offers both power and agility., the Mobula8 is designed to provide endless fun. High-Performance EX1103 KV11000 Motors Equipped with the impressive EX1103 KV11000 motors, the Happymodel Mobula8 offers exceptional speed and responsiveness. These motors ensure smooth and precise control, allowing you to perform daring maneuvers and achieve thrilling flight experiences. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTXVTX Power up to 400mwELRS V2.0 (Default), provide firmware to support ELRS V3.0 EX1103 KV11000 motorsCaddxFPV Ant FPV cameraSmooth and powerfulCompatible with 1S-2S Lipo/LIHV battery Recommended Match (1)Jumper Bumblebee HALL/RDC50 ELRS 2.4G FPV Controller Compact & Full-Featured FPV (2)RadioMaster Pocket 2.4GHz 16CH ELRS/CC2500 Hall Gimbals Radio Controller for FPV Racing Drones Recommend 2S 450mah/550mah/650mah battery (Not include) GNB 450mAh 2S HV LiPo Battery 7.6V 80/160C XT30 Plug GAONENG/GNB 530mah 2S 7.6V HV 90C LiPo Battery XT30 Plug Specifications for happymodel mobula8: Brand Name: HappymodelItem Name: Mobula 8 Micro FPV 1-2S whoop droneWheelbase: 85mmSize: 120mm*120mm*50mmWeight: 43g Receiver option: 2.4G ELRS SPI (Support ELRS v2.0, provide firmware could compatible with ELRS v3.0)SPI Frsky D8/D16 not compatible with EMAX E6 radioSPI Flysky AFHDS2A Spare parts specifications: Motor Mode: EX1103 KV11000Configu-ration: 9N12PStator Diamter: 11mmStator Length:3mmShaft Diameter: Φ1.5mmMotor Dimension (Dia.*Len):Φ13.5mm*15.5mmWeight(g): 3.8gNo.of Cells(Lipo): 1-2S Propellers Weight: 0.88gMaterial: PCPitch: 2.3inchProps Dia: 52.17mmCenter Thickness: 5mmCenter Hole Dia: 1.5mm Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRX12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689 or ICM42688P(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1-2S battery input (DC 2.9V-8.7V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2ABuilt-in voltage detectionBuilt-in current sensor Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableFirmware target: Z_H_30 Default protocol: DSHOT300Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power:
Makerfire.com
Delivery: in USA
Report
$129.99
4 more offer(s)
Installation options for components (recommended configurations):
  • Flight Controller: STM32F405RGT6
  • Power Controller: Blheli_S 4 in 1 ESC
  • Video Transmission: DJI O3 Air / Walksnail avatar HD Mini 1S lite / HDZERO Whoop Lite
  • Motors: EX1103 KV11000
  • Propellers: Gemfan Hurricane 2023