Festool CSC SYS 50 EBI-Basic 576820 (576820)

Versátil: cortes paralelos de hasta 280 mm. cortes de tronzar de hasta 450 mm de ancho Cortes angulares de -2° a 47° Práctico: altura de corte hasta 35 mm, incluso cortes angulares hasta -10°. ideal para rebajar listones de ajuste Compacta y portátil: se puede transportar con una sola mano gracias al práctico formato Systainer. Ahora más fácil to... moredavía gracias al bastidor inferior UG-CSC-SYS Precisión máxima: mediante la pantalla digital se pueden ajustar la altura y el ángulo con precisión milimétrica tan solo pulsando un botón Repetitividad: el ajuste de altura y de ángulo (en mm y pulgadas) se realiza a través de la pantalla digital sin paralaje, es decir, con mayor precisión que a ojo. Cortes repetitivos precisos garantizados Cómodo: pueden guardarse cuatro ajustes de la hoja de sierra y seleccionarse después en la pantalla digital Tope paralelo muy preciso: tope paralelo robusto con fijación doble (solo con una palanca de apriete) para una alineación exacta y unos resultados de corte perfectos Tope angular altamente preciso: el tope angular se alinea a la perfección en el carro deslizante gracias a una ranura y se fija en el centro. Para escuadras de inglete entre -70° y +70° Totalmente sin tirones: carro deslizante con cojinetes de bolas para cortes paralelos y angulares de la máxima precisión

Incredibly compact. Extremely versatile. So compact, it fits into a Systainer. Portable and precise, the CSC SYS 50 cordless table saw produces shop-quality cuts on the jobsite. Impressively versatile, with parallel cuts of up to 11“ (280 mm), a cross-cut width of up to 17-3/4“ (450 mm) and bevel cuts of -10° to 47°. Precise cuts at the press of a... morebutton. You can set the height and angle accurately to a tenth of a millimeter (1/256“) with unique digital operation—more exact than with any tape measure, with 100% repeat accuracy. Even the most demanding cuts are a breeze with unprecedented precision. The robust guidance system is made up of a rip fence, a miter gauge and sliding table. As powerful as a corded saw. Even for rip cuts in solid wood, you won‘t notice any difference in power, compared with corded machines. The 2x18 V dualbattery system, in combination with the brushless EC-TEC motor, will impress you with maximum power and torque. Parallel cuts up to 11" (280 mm) The folding table ensures compact dimensions during transport and a precise, stable support for materials of up to 11“ (280 mm) when sawing. Cross-cuts up to 17-3/4" (450 mm) An impressive cross-cut width of up to 17-3/4“ (450 mm) is possible. Bevel cuts from -10° to 47° Bevel cuts from -10° to 47°, at a cutting height of up to 1-3/8“ (35 mm), even down to -10°. Miter angles from -70° to +70° The angle can be optimally adjusted via the exact scale. detents also make selecting the most important angles easier. Made for interior finishing With a guaranteed cutting height of 1-7/8“ (48 mm), all applications typical in interior finishing can be carried out. More precise than any tape measure The desired sawing height and angles are accurately entered to within 0.1 mm (1/256“) via the digital display and the dial. This adjusts the saw blade automatically. The perfect pair: Underframe and the CSC SYS 50 cordless table saw. The UG-CSC-SYS underframe is ideally suited for use with the CSC SYS 50 cordless table saw. You position the CSC SYS 50 securely on the worktop via suitable holes – and raise it to an ergonomic working height. The bottom plate of the underframe offers a material support surface for rip and cross-cuts (especially for long materials).