Electrical Wires & Cables

"When you need to contain a volume of various wires and cables in an easy-to-install design, this raceway is the perfect choice. Spacious interior is ideal for organizing power and telecommunications in a typical home office setting. Paintable and stainable. The Starter Box fits over existing single gang outlet to feed power as the starting point for your system. Fits over existing single-gang outlet to feed power as the starting point for your system (1""deep)Finish: IvoryMaterial: plasticFor installing standard size switches or outlets1"" deepPlasticIvory.Ivory Plastic, Standard Switch/Outlet Box, Accepts Standard Wiring Devices,."

Installed on a vertical conduit, usually outdoors, to receive open wires from an electrical service line. Sometimes called a weather head, it prevents rainwater from entering the conduit.

Designed specifically for above-grade, interior or exterior connections exposed to damp, wet or corrosive environments, WeatherProof wire connectors are the perfect twist-on solution for connections that require protection from the elements. The swept-wing design makes the connector easy and comfortable to apply, while the pre-filled, silicone-based sealant protects against moisture and corrosion, eliminating the need for heat-shrink or excessive taping. WeatherProof wire connectors feature tough, flame-retardant shells that withstand most rugged environmental extremes and are listed to UL 486D for use in damp or wet locations that are above ground.

Ceiling fan bracketed box can be used for the installation of a variety of applications. These include installing ceiling and wall lighting fixtures, fans, or convenience outlets and devices. It is a combination-head fixture and includes cover mounting screws. Additionally, this box is both UL and RoHS listed for safe use.

For through terminations, two gang, surface mounted electrical box which has one conduit entrance hub in each of two opposite walls of the box. Use for straight line conduit runs and wire.

Used for waterproof repair of well pipe cables and splices of stranded cable 14-8 AWG.

Exposed Boxes Type FSCC are designed for use in indoor and outdoor locations where boxes are exposed and subject to environmental conditions. Type FSCC is intended for straight line conduit runs with two conduit hubs on one end and one conduit hub on the opposite side.

Sigma's weatherproof two-gang GFCI covers provide protection to two outdoor GFCI receptacles. Their rugged, die-cast construction features self-closing lids to prevent moisture penetration when the receptacles are not in use. They compliment weatherproof two-gang boxes installed in wet, damp or dry locations and are powder coated for corrosion resistance. Covers include hardware and gasket.

EZ34DO-HW is the Cantex 2-gang Heavy Wall electrical switch and outlet EZ Box for renovation projects (old work). This heavy duty box with winged mounting tabs is perfect for residential and light commercial applications where an electrical switch or outlet box may be exposed to the elements.

Field installed for #6 - 2/0 Al/Cu wire, UL Listed, Compatible with both QO and HOM load centers

The Sigma ProConnex 90-Degree Liquid Tight Connectors are used to terminate and seal Liquid-Tight Flexible Metal and Liquid Tight Non-Metallic Type B conduits at 90-degree angles to either an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered thread female entry or an unthreaded knockout using the provided sealing washer and locknut.

The connector that started it all, an American classic. The IDEAL Wire-Nut wire connectors set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connectors in America, it literally set the industry standard for years to come. With a fixed, square-wire spring and a positive grip shell, the Wire-Nut is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.

Sigma's weatherproof two-gang boxes provide a junction for conduits and can house up to two wired devices such as receptacles or switches. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations.

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. The Gardner Bender 22 - 10 AWG 8-Circuit Terminal Block employs screw clamps as wire connectors. This terminal block remains operational in temperature extremes ranging from -40 to 260° Fahrenheit. Connect up to 8 circuits quickly and easily.

The Sigma ProConnex Conduit Bodies are used to gain access to the interior of a raceway for wire pulling, inspection and maintenance where the raceway changes direction. These aluminum die-cast Conduit Bodies feature a removable aluminum cover that allows access to the interior of the raceway. Conduit Bodies are pre-assembled with cover and gasket and are suitable for use in dry locations.

Small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.

Gardner Bender™ wire connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications, GB wire connectors offer world-class quality, performance and application versatility.

It is a 1 Gang Ivory Non-Metallic Switch Kit Includes 1 Gang Outlet Box Faceplate 1 Pole Switch Paintable Stainable Carded.

Sigma's weatherproof two-gang boxes provide a junction for conduits and can house up to two wired devices such as receptacles or switches. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes are powder coated for corrosion resistance and feature a ground screw for secure installation. Boxes include hardware, closure plugs and a pre-installed ground screw.

Four-gang nail-on new work outlet, volume 60 cubic inch, length 7-5/8 inch, width 3-11/16 inch, depth 2-1/2 inch, blue color, PVC material, mounting means captive nails and bracket support.

Gardner Bender™ wire connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications, GB wire connectors offer world-class quality, performance and application versatility.

Jumper Wire Kit for Breadboarding 140 Pieces, Assorted Lengths and Colors 22 AWG Solid Wire Includes Small Plastic Case for Storage and Organization

The 2 Gang Switch Box is used to support 2 or more toggle switches, duplex devices, decorative devices, and a variety of electrical outlets. This box is ideal for commercial applications where multiple-point lighting controls are necessary.

"Raco Ceiling Fan Rated Boxes are designed, tested and UL listed for the dynamic loads of ceiling fans. Designed with the installer in mind and rich in time saving features. A variety of products are available to meet nearly every application. Raco ""Insider"" connector is included for use with non metallic sheathed cable."