Electrical Wires & Cables

Durable, non-metallic low voltage mounting bracket is an easy, money-saving solution. The bracket is designed for the installation of CL2 low voltage wiring for new construction with wood studs. The bracket can be mounted with nails (included) or screws. It is made of non-conductive smooth plastic which protects the cables from damage. The built-in loop on the bracket allows you to tie off the cable to keep the installation clean and organized. The bracket is ideal for new, light residential and light commercial applications. The low voltage bracket is UL and CSA listed for a safe and secure installation.

Octagon box is made to install ceiling and wall lighting, fixtures, and fans. Additionally, it also works with convenience outlets and devices. It is made with a combo-head fixture and includes cover mounting screws. Features durable steel construction.

The Cantex 3/4 in. Pull Elbow is used to effect a sharp 90 degree turn in a conduit run where wires must be continuously pulled around the turn. The pull elbow includes a removable casket cover to provide easy access to wiring.

Sigma's weatherproof one-gang 30/50 Amp round receptacle cover provides protection for a single 30/50 Amp receptacle mounted vertically in a one-gang weatherproof box. These covers are powder coated for corrosion resistance and include hardware and gasket.

Sigma's weatherproof one-gang boxes provide a junction for conduits and can house a single wired device such as a receptacle or switch. The non-metallic construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes include hardware and closure plugs.

CANTEX EZ20CHG EZ BOX is a 20 cu. in. new work (new construction) residential ceiling box with an attached bar hanger for extra support and adjustability and a ground lug for grounding. EZ20CHG is for residential and light commercial ceiling applications.

Sigma's weatherproof one-gang boxes provide a junction for conduits and can house a single wired device such as a receptacle or switch. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes are powder coated for corrosion resistance and feature a ground screw for secure installation. Boxes include hardware, closure plugs and a pre-installed ground screw.

The Sigma ProConnex 90-Degree Liquid Tight Connectors are used to terminate and seal Liquid-Tight Flexible Metal and Liquid Tight Non-Metallic Type B conduits at 90-degree angles to either an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered thread female entry or an unthreaded knockout using the provided sealing washer and locknut.

The 221 Series from WAGO provides flexible, fast and safe connections. Pull the lever up, insert a conductor and push the lever back down - done! As tool-free, lever-actuated connectors, WAGO's 221 Series Splicing Connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors. Setting new standards in electrical installation, the 221 Series LEVER-NUTS splicing connector is now smaller, more user-friendly and made for larger conductors.

Sigma's weatherproof extension rings increase the capacity of a weatherproof box. The rugged, die-cast construction prevents moisture penetration making the extension rings suitable for wet, damp or dry locations. They are powder coated for corrosion resistance and include gasket and hardware.

This 4 inch round 22.5 cu. in. Outlet Box is designed for new work applications. This premium box features fiberglass construction, is UL listed and carries a 2-hour fire rating. An adjustable bar hanger 16 in. - 24 in. is included.

Used to connect a conduit to a meter box. The offset is needed to move the path of the conduit away from a wall into the holes in the box or meter box.

The Sigma ProConnex Grounding Clamps are used to connect bare or insulated copper wire to copper or galvanized steel water pipe or copper tubing. These copper alloy clamps are suitable for direct burial in the ground and concrete.

Pitch: 2.54mm/0.1'; Cable Length: 30cm/12' Country of Manufacture: CHINA; Material: Plastic Net Weight: 24g; Package Content: 5 x JST XH Adapter Cable Brand: Assisi

The Sigma ProConnex Ground Clamps with Lay-in Lug are used to connect a ground wire in Rigid conduit or Rebar to copper or galvanized steel water pipe. These Patented fittings are suitable for direct burial in the ground and concrete.

Sigma's weatherproof one-gang boxes provide a junction for conduits and can house a single wired device such as a receptacle or switch. The non-metallic construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes include hardware and closure plugs.

Net Weight: 33g; Package Content: 20pcs x JST Connector Wire Main Color: Black, Red, White Pitch: 2.54mm/0.1' Total Length: 20cm/ 8'

The Sigma ProConnex 90-Degree Liquid Tight Connectors are used to terminate and seal Liquid-Tight Flexible Metal and Liquid Tight Non-Metallic Type B conduits at 90-degree angles to either an oil-tight, liquid-tight or rain-tight box or enclosure. Connectors can be used with tapered thread female entry or an unthreaded knockout using the provided sealing washer and locknut.

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric …

10 Pins Connector Flat Ribbon Cable,2.54mm Pitch;Length: 43cm / 16.93-inch.Total Width: 12.6mm / 0.5-inch;Connector Type: Female Connector.Main Materials: Plastic ;Color: Rainbow Color.

CANTEX EZ32XN EZ BOX is a 32 cu. in. 4 in. square PVC box for residential or light commercial new construction (new work) electrical installations with enhanced angled nails for EZ mounting. 4 in. square boxes provide maximum volume for multiple conductors and connectors that often run in two or more directions.

Unistrut pipe clamps, unless noted are punch press made from hot rolled, pickled and oiled steel plates, strip, bar or coil. The fitting steel also meets or exceeds the physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale.

The Sigma ProConnex Compression Connectors are used to secure and terminate threadless Rigid conduit or IMC to a steel outlet box or metal enclosure. These zinc-plated steel connectors are approved for concrete-tight applications.

Fittings, unless noted are made from hot rolled, pickled and oiled steel plates, bar, strip or coil. All fittings meet or exceed physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information.