Electrical Wires & Cables

Steel outlet boxes square welded conduit wiring system. Two 1/2 inch and ten TKO conduit knockouts (sides). One 1/2 inch, two 3/4 inch and two TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or receptacles. Combination cover screw heads provide for faster mud ring or cover installation. UL Listed.

The Sigma ProConnex Grounding Clamps are used to connect bare or insulated copper wire to copper or galvanized steel water pipe or copper tubing. The pressure bar grips armored cable insulation to decrease chance of the grounding conductor being pulled out.

The 1 Gang Low Voltage Device Bracket is used to add a low voltage in drywall, tile, or plaster wall openings. Its unique design allows brackets to be mounted both vertically or horizontally. It is designed for 3/8 in. - 1-1/3 in. drywall.

The Vinyl-insulated ring terminals mate, connect, or terminate a single wire. The ring shape of the terminal allows for connection to a screw or stud type electrical application. Our butted seam ring terminals are the most economical insulated terminal available. Vinyl-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.

Hubbell Raco 4 inch Round ceiling fan support pan of capacity 21.5 cubic inch is used for installation of heavy light fixtures or ceiling fan. It features drawn galvanized steel construction with 1/2 inch four knockouts in bottom of pan for easy entry and exiting with cables. It measures 4 inch diameter x 2-1/8 inch It is provided with connector for use with non-metallic sheathed cable. It features hardened mounting screws for easy installation. It is acceptable for use in 2 hours rated walls and ceilings. It features 1/2 inch FA bracket that allow for easy positioning of box along wood studs or joists to be securely mounted flush. It comes with four knockouts and includes mounting hardware.…

SimPush, push-to-install conduit connectors are used to secure EMT conduit to boxes quickly and without tools. These EMT fittings are designed for use in dry locations only.

Sigma's weatherproof one-gang GFCI covers provide protection to outdoor vertical GFCI receptacles. Their rugged, die-cast construction features a self-closing lid which prevents moisture penetration when receptacles are not in use and compliment weatherproof one-gang boxes. GFCI covers are powder coated for corrosion resistance and include hardware and gasket.

Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available inn a variety of packaging options, look to Gardner Bender for secure wire connection options.

Rectangular-shaped conduit body with a removable cover. The conduit body contains three conduit hubs, one in each end wall and one at 90 degrees in the middle of the sidewall.

Carlon products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life. Made for quick and easy installation, code-compliance and durability, Carlon non-metallic boxes and accessories are widely recognized as the industry standard.

Use Type B conduit and fittings whenever flexibility is required for installation, operation, or maintenance.

Used to house wiring devices such as switches or outlets.

This 2-Gang 32.5 cu. in. switch or receptacle box is suitable for use in old work applications. Including leveling ribs that position the face of the box parallel to the wall surface. This premium box features fiberglass construction, is UL listed and carries a 2-hour fire rating.

The brand for this item is BURNDY Orders $75 or more ship free This item ships directly from Zoro

The brand for this item is BURNDY Orders $75 or more ship free This item ships directly from Zoro

Commercial

The brand for this item is VELVAC Orders $75 or more ship free This item ships directly from Zoro

Sigma's weatherproof one-gang boxes provide a junction for conduits and can house a single wired device such as a receptacle or switch. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes are powder coated for corrosion resistance and feature a ground screw for secure installation. Boxes include hardware, closure plugs and a pre-installed ground screw.

The Cut-In Switch Box is used to support toggle switches, duplex devices, and decorative devices. It also supports a variety of electrical outlets. Additionally, this box is both UL and RoHS compliant for safety.

For use with outdoor PVC FS electrical boxes. Schedule 40 PVC

Sigma's weatherproof one-gang boxes provide a junction for conduits and can house a single wired device such as a receptacle or switch. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes are powder coated for corrosion resistance and feature a ground screw for secure installation. Boxes include hardware, closure plugs and a pre-installed ground screw.

Sigma's weatherproof round boxes provide a junction for conduits and can be used to mount lampholders and lighting systems. The rugged, die-cast construction prevents moisture penetration making the boxes suitable for wet, damp or dry locations. Boxes are powder coated for corrosion resistance and feature a ground screw for secure installation. Boxes include hardware, closure plugs and a pre-installed ground screw.

A section of PVC schedule 80 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run.

Switch Boxes are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.