Inexpensive electrical Wires & Cables

Thomas & Betts, B306, Ivory Metal, Surface Raceway Fitting...

Cantex Adapter in gray color is made of rigid PVC for corrosion resistance and added durability. Fitting has two female ends, one end is threaded and the other is solvent weld. The SCH 40/80 measures 1-7/16 Inch x 1 Inch and has a trade size of 1/2-14 Inch. It is used for transition of threaded metal conduit to PVC conduit. Adapter is UL listed, CSA certified and meets rating.

Male Terminal Adapters are connectors used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end. Male Terminal Adapters can also be used to connect PVC conduit to a box or other threaded body with use of a lock nut. The fittings consist of one solvent weld female end and one threaded male end. Both ends will fit the same diameter conduit.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

Cantex adapter in gray color is made of rigid PVC for corrosion resistance and added durability. Fitting has two female ends, one end is threaded and the other is solvent weld. The SCH 40/80 measures 1-5/8 inch x 1-1/4 inch and has a trade size of 3/4-14 inch. It is used for transition of threaded metal conduit to PVC conduit.

Cantex 5140104 is a 3/4 in. male terminal adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end. Male Terminal Adapters can also be used to connect PVC conduit to a box or other threaded body with use of a lock nut. The fittings consist of one solvent weld female end and one threaded male end. Both ends will fit the same diameter conduit.

Cantex EZ18SNW EZ Box is an 18 cu. in. 1-gang electrical switch and outlet box for residential or light commercial electrical installations. It features knockouts and enhanced angled nails for easy installation.

Cable protector plates for wood studs, standard type/non-gangable protect non-metallic sheathed cable or raceway type wires running through wood studs from accidental nail, screw or drill penetration. The plate also applies to plumbing to protect nonmetallic piping. No nails required. Pre-galvanized steel construction adds corrosion protection. No additional hardware is required, just position and hammer down spurs.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

It is ideally used for fire resistive walls and ceilings in new work residential construction. Switch or receptacle outlet box is UL listed. Machine tapped device holes, offset gauge marks, leveling ribs, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures.

The brand for this item is GROTE Orders $75 or more ship free This item ships directly from Zoro

Others

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

Sigma's Safety Nail Plates are used to protect cable insulation from nail punctures in wooden structures. These nail plates are of zinc-plated steel construction.

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

A section of PVC Schedule 40 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run. Both ends of the bend are spigot (plain) end. Both ends are solvent weld. Can be used above ground or buried and are suitable for concrete encasement.

Male Terminal Adapters are connectors used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end. Male Terminal Adapters can also be used to connect PVC conduit to a box or other threaded body with use of a lock nut. The fittings consist of one solvent weld female end and one threaded male end. Both ends will fit the same diameter conduit.

Innovative, interlocking design of this cable protector plate does not allow nail or screw penetration through gaps or holes. No additional hardware needed, just position and hammer down spurs.

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

The Sigma ProConnex Conduit Locknuts are used for securing Rigid conduit, IMC and other threaded connectors to a steel outlet box or metal enclosure. These zinc-plated steel locknuts are recommended for indoor applications.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.