Tool Kits Wiha

Insulated PicoFinish Precision Slotted Screwdriver
Insulated PicoFinish Precision Slotted Screwdriver
Insulated PicoFinish Precision Slotted Screwdriver
Insulated PicoFinish Precision Slotted Screwdriver
Insulated PicoFinish Precision Slotted Screwdriver

Set Includes: Slotted: 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5 4.0mm | Phillips: #000, #00, #0, #1 | Hex: 0.7~0.028"", 0.9~0.035"", 1.3~0.050"", 1.5, 2.0, 2.5, 3.0mm, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 | Torx: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 | Nut Drivers: 1.5, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5mm | Chip Lifter 3.5mm x 50mm
Special high performance CRM-72 Tool Steel
Exact Fit Precision Machined Tips
Through Hardened For Maximum Durability
Max shaft 1.5-2.5"
Exact fit precision machined tips
Special high performance CRM-72 tool steel
Vapor hard chromed satin non-slip tips
Through hardened for maximum durability
All handles are molded onto blades…

Set Includes: Slotted: 3.0x4.5, 4.0x6.0, 5.5x6.5mm | Pozidriv: #1x2 | Phillips: #1x2, #0x3 | Square: #1x2, #0x3 | TORX: T6xT7, T8xT9, T10xT15, T20xT25, T27xT30
Includes 13 double-ended insert bits for 26 driver tip profiles
Locking bit collar with quick release for secure bit coupling
Spring driven pop up cartridge for fast bit selection
Ergonomic cushion grip handle for comfort and control

Set Includes: Slotted: 3.0x4.5, 5.5x6.5mm | Phillips: #1x2, #0x3 | Square: #1x2, #0x3 | Pozidriv: #1x2 | TORX: T10xT15, T20xT25 | Hex Inch: 1/8x9/64, 5/32x3/16” | Hex Metric: 3.0x4.0, 5.0x6.0mm
Includes 13 double-ended insert bits for 26 driver tip profiles
Spring driven pop up cartridge for fast bit selection
Locking bit collar with quick release for secure bit coupling
Ergonomic cushion grip handle for comfort and control

Set Includes: Adjustable Pliers: 7.0”, Adjustable Pliers: 10.0”, Adjustable Pliers: 12.0”, Auto Grip Pliers: 10.0” and Pliers Wrench 10.25"
Soft vinyl oil and solvent resistant grips for a comfort and leverage
Wiha's Patented DynamicJoint Provides 40% More Gripping Power
Extra narrow head for working in restricted spaces
Simple push button for locking to desired setting

Ergonomic cushion grip handle for comfort and control
Dual durometer construction for long-lasting durability
Handle directly molded to the blade for permanent bond
Handle size proportionate to blade for consistent mechanical advantage
Parallel flats for roll-off prevention
Tip profile labeled on cap for easy identification
Wiha premium quality tool steel for strength and durability
Black oxide finish for corrosion protection
Exact fit precision machined tip for reduced cam out
Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Set Includes: 7/32, 1/4, 5/16, 3/8, 1/2"
Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind
Meet ASTM F-1505, IEC 900,VDE 0680, NFPA 70E
SoftFinish cushioned grips
Handle insulation molded on for maximum durability
Insulated 1000 volt rated, 10,000 volt tested
Each tool individually tested for insulation integrity, ISO quality
Meet ASTM F-1505, IEC 900,VDE 0680, NFPA 70E
Ergo molded insulated cushioned grips
Handle and insulation molded on for maximum durability

Precision Adjustable Locking Blades
Blades adjust lock in 1/8" Increments
Through Hardened For Longest Life Durability
Manufacturer: Wiha Tools

Insulated 1000 Volt Rated 10,000 Volt Tested
Meets ASTM F1505, EN/IEC 60900, NFPA-70E
Professional Series Long Life Insulated
High Visibility Coatings
Double Covered Insulation Red Over Yellow

Insulated BiCut SuperCut & Drivers Set
Insulated BiCut SuperCut & Drivers Set
Insulated BiCut SuperCut & Drivers Set
Insulated BiCut SuperCut & Drivers Set
Insulated BiCut SuperCut & Drivers Set