Drill Bits

Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee 3/4 in. x 6 in. Flat Boring Bit. This premium quality Flat Boring Bit is made of heat treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica.

For drilling the most accurate and clean holes in wood and plywood, choose the Milwaukee 3/8 in. Brad Point Bit. Milwaukee Brad Point Bits start holes with precision and finish without splinters. The machined tips maintain a sharp cutting edge for longer life on the job. The bit feature 1/4 in. depth marks for easy visual reference during drilling.

DeWalt screwdriving bit tips are a perfect complement to your drill/driver and are designed to meet the demands of working professional contractors. Each bit is cut from shock-resistant tool steel and features an advanced hardening process that greatly reduces wear. Its snub-nose design fits perfectly into hex-socket adapters and the tips are precision ground to seat firmly into the screw head. The tips come in a variety of sizes and styles to accommodate all commonly available screws.

Diablo's driver bit range of Square bits delivers maximum performance, extreme durability and up to 50x longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. MaxTorque Zone delivers ultimate torque resistance by absorbing torque, creating less stress at the tip when tightening and removing nuts and screws This range is Impact Strong, delivering increased shank stability and durability in cordless and corded impact and drill drivers.

Milwaukee Shockwave impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix that with an aggressive 35 degree cutting edge which ends at 15 degree, The quad edge tip delivers a precision start and four cutting edges to create smaller chips. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes.

DeWalt screwdriving bit tips are a perfect complement to your drill/driver and are designed to meet the demands of working professional contractors. Each bit is cut from shock-resistant tool steel and features an advanced hardening process that greatly reduces wear. Its snub-nose design fits perfectly into hex-socket adapters and the tips are precision ground to seat firmly into the screw head. The tips come in a variety of sizes and styles to accommodate all commonly available screws.

Milwaukee 1/8in Shockwave Carbide Multi-Material Drill Bits are the most versatile bits, designed to tackle a variety of materials, including brick, block, concrete, tile, wood, aluminum, PVC, steel, and more. The aggressive multi-grind carbide tip delivers up to 10x longer life in stacked materials and up to 85% faster drilling speeds in metal. Equipped with a 1/4in hex shank, these general-purpose drill bits are compatible with impacts, drill/drivers, and hammer drills. These Milwaukee drill bits provide the ideal all-in-one solution for the widest variety of materials, tools, and applications.

Milwaukee Thunderbolt Black Oxide jobber length drill bits are designed for extreme durability and long life. The Thunderbolt web features a thicker core than a standard drill bit to provide ultimate strength and protect against side load breakage. A specially designed parabolic flute form clears chips fast, while the 3-Flat Secure-Grip shank holds the bit firmly in the drill chuck. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee Thunderbolt Black Oxide bits require less effort to drill through metal, wood and PVC and are highly recommended for use with portable drills.

The Milwaukee Red Helix Cobalt 7/64 in. Drill Bit are engineered for extreme durability and longer life in hard metal applications. The Milwaukee Cobalt drill bits are designed with a Variable Helix that includes an aggressive 35 deg. Helix Angle which ends at 15 deg. The 135 deg. split point tip delivers a precision start and prevents walking for fast, accurate holes in hard metals, PVC and wood. The tapered drill bits feature a new enhanced tapered web that strengthens the bit's core to increase flute durability. The cobalt twist drill bits are ideal for tough applications, providing up to 15X life vs. black oxide brill bits.

Constructed from one solid piece of heavy-duty metal, Dewalt Impact Ready titanium drill bits are up to 5 times more durable than 2-piece conventional bits. A patented web taper helps to increase bit strength and a patented Pilot Point tip delivers speed and clear, burr-free holes with helps to reduced bit walking.

Avanti Pro masonry drill bits provide top quality performance when drilling into brick or block. This range features a carbide tip for extra durability and longer life in tough applications. Dual flutes remove dust and debris for cleaner holes. Avanti Pro masonry drill bits are only for use with drills in rotary mode.

Milwaukee SHOCKWAVE Impact Duty magnetic bit tip holders are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The 2-piece construction of the holders is the optimal assembly for abusive applications. Now use with Milwaukee SHOCKWAVE Impact Duty insert magnetic nut drivers (1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.).

The Milwaukee M/2 3/16" x 6" SDS-Plus drill bits come in a 2-count pack built for general concrete drilling with corded and cordless rotary hammers. The 2-cutter masonry design features a 4-inch drilling depth suited for common fastening and anchoring work in concrete. Milwaukee's variable flute geometry maximizes debris extraction, delivering up to 20% more holes per charge in cordless rotary hammers. Enhanced rebar guards handle repeated contact with rebar and tough aggregate without degrading prematurely. Breaker points at the tip pulverize material faster, reducing overall drilling time on the jobsite. Each bit includes a wear mark indicator that shows when the diameter drops below ANSI …

The Milwaukee 1/16" Titanium SHOCKWAVE Drill Bit is purpose-built for both impact drivers and standard drills, engineered to handle the high-torque demands that break down lesser bits. Milwaukee's RED HELIX flute uses a Variable Helix geometry that transitions from a steep 35° angle to a 15° exit, clearing chips from the hole more efficiently than conventional flute designs. Faster chip evacuation means less friction and heat at the cutting edge, allowing the titanium coating to maintain its hardness through significantly more holes. High speed steel underneath the titanium layer adds core toughness for repeated impact driver use, while the compact 2.25" body and 1/4" hex shank fit tight work…

The Milwaukee Thunderbolt 1/2" Black Oxide Drill Bit is a jobber-length bit built for extreme durability and long life. Milwaukee engineered the Thunderbolt web with a thicker core than standard bits, giving greater resistance to side-load breakage under demanding conditions. The parabolic flute geometry clears chips from the hole fast, keeping the cutting path clean. A 135° split point starts on contact, so the bit won't walk across the workpiece, even on curved surfaces. Black oxide coating provides both lubricity and corrosion protection. The 3-flat Secure-Grip shank fits firmly in the drill chuck to reduce slipping. The bit drills through metal, wood, and PVC with less effort than conventional de…

The Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill Bit delivers up to 20% more holes per charge in cordless rotary hammers compared to standard bits. Milwaukee's breaker point design pulverizes concrete more effectively, resulting in noticeably faster drilling speeds. The variable flute geometry maximizes debris extraction from the hole during operation. Enhanced rebar guards stand up to hard aggregate and rebar contact, extending the bit's working life in demanding conditions. A centering tip provides exact spot drilling for precise hole placement, while the reinforced flute construction minimizes vibration during operation. The built-in wear mark indicator shows when the bit no longer …

FlexTorq bits are engineered for durability. Every FlexTorq bit features a FlexTorq zone designed to absorb impact for longer life. Save time and find the right bit with the new highly-visible laser-etched size. Each FlexTorq bit is impact-ready with a 1/4 in. hex shank for use in impact drivers and drills.

Diablo's spade bit range provides one of the fastest, most effortless hole-drilling solutions on the market for fast, clean wood. The high-performance Speed-Tip design self-feeds for faster hole-making when compared to traditional spade bits.

The Milwaukee Shockwave Impact Duty Magnetic Bit Holders are engineered for extreme durability and Up to 30X Life. Made from proprietary steel and heat treated to control hardness, the Shockwave Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The 2 piece construction of the holders is the optimal assembly for abusive applications.

Diablo's spade bit range provides one of the fastest, most effortless hole-drilling solutions on the market for fast, clean wood. The high-performance Speed-Tip design self-feeds for faster hole-making when compared to traditional spade bits.

DeWalt screwdriving bit tips are a perfect complement to your drill/driver and are designed to meet the demands of working professional contractors. Each bit is cut from shock-resistant tool steel and features an advanced hardening process that greatly reduces wear. Its snub-nose design fits perfectly into hex-socket adapters and the tips are precision ground to seat firmly into the screw head. The tips come in a variety of sizes and styles to accommodate all commonly available screws.

FlexTorq bits are engineered for durability. This latest generation from DeWalt redefines fitment and performance with overhauled tip geometries. The redesigned tip geometries for use with T15 size fasteners deliver a 3x superior fit.

DeWalt screwdriving bit tips are a perfect complement to your drill/driver and are designed to meet the demands of working professional contractors. Each bit is cut from shock-resistant tool steel and features an advanced hardening process that greatly reduces wear. Its snub-nose design fits perfectly into hex-socket adapters and the tips are precision ground to seat firmly into the screw head. The tips come in a variety of sizes and styles to accommodate all commonly available screws.

Diablo's driver bit range of Hex bits delivers maximum performance, extreme durability and up to 50x longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. MaxTorque Zone delivers ultimate torque resistance by absorbing torque, creating less stress at the tip when tightening and removing nuts and screws This range is Impact Strong, delivering increased shank stability and durability in cordless and corded impact and drill drivers.