Chargers for Gadgets Monoprice

Fast Charging: This 100W Universal USB C Wall Charger can fast charge a wide range of devices including phones, tablets, and laptops, regardless of manufacturer or brand. It can fully recharge a 15' M

Monoprice 65W Universal USB-C Laptop Charger Part Number: 143671

This 14 AWG power cord features a North America NEMA® 5‑15 plug on one end and an IEC 60320 C19 female connector on the other end. The C19 coupler is used for supplying power in IT applicati more→ons where higher currents are required. These include high‑power workstations and servers, uninterruptible power supplies, power distribution units, large network routers, switches, and blade enclosures, as well as high‑current medical equipment.
Features:
- NEMA 5‑15P to IEC 60320 C19 power cords connect devices with C20 and NEMA 5‑15R power connectors
- Recommended for IT and medical applications where higher currents are required
- Heavy‑duty computer power …

This cable features a grounded IEC 60320 C14 plug on one end and a NEMA® 5‑15R receptacle on the other. It is perfect for extending a standard NEMA 5‑15 to IEC 60320 C13 power cable. I more→t has 18 AWG conductors, making it suitable for general use. This cable is designed to carry up to a 10 amp/1250 watt, 125 volt load.

- Plug Type IEC 60320 C14
- Receptacle Type NEMA® 5‑15R
- Jacket Material SVT
- # of Conductors 3
- Wire Gauge 18 AWG
- Maximum Current 10 amps
- Certifications ETL, cETL, CSA®, RoHS






Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
NEMA® is a registered trademark of National Electrical Manufacturers …

The Serial ATA standard provides for the adoption of a new 15-pin drive power connector, replacing the ubiquitous 4-pin Molex® connector. However, existing system cases and power supplies m more→ay have an insufficient number of SATA power connectors, while still retaining the older Molex connectors.
This 8" adapter cable plugs into a 4-pin Molex power plug and provides a single 15-pin SATA power connector, with a locking latch so that your connection does not come loose due to movement or vibration.
Warning! The Molex connector provides only 5 and 12 VDC power. While many SATA drives only require these power levels, some require the additional 3.3 VDC power provided for in the SATA specification.…