Pump Accessories LEVEL
prices on 10 modelsWhen you make a purchase through links on our site, we may receive a affiliate commission.
 | Zoeller 10-1878 35' Variable Level Control Switch with Clamp 115/230V Zoeller variable level control switch can be used to monitor liquid level conditions in pump tanks and lift stations. This particular float comes with a 35' cord. Intended for use with a control panel, the variable level control switch can be used to activate pumps or alarms. Some of the more common places the switch is used include pump chambers, dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. This variable level control switch is normally open when hanging vertically above the liquid level. The switch is engaged when the rising water level lifts it a few degrees above … |  |
 | Zoeller 10-0032 Switch-Mate Variable Level Float Switch (115V-15A) with 15' Cord Known as the "Switch Mate", the single piggyback variable level float switch (VLFS) allows you to convert a 115 V nonautomatic pump into an automatic pump. Additionally, the piggyback float switch allows you to adjust the on and off points within the tank. This is ideal for deeper basins and pump tanks. The piggyback float switch is constructed of PVC and polypropylene. The materials of construction ensure that the switch is able to withstand a harsh wastewater environment. The standard cord length is 15' which is more than enough for most basin or pump tank applications. It is also a normally open mechanical float,… |  |
 | Zoeller 10-0034 Switch-Mate Variable Level Float Switch (115V-13A) with 15' Cord The "Switch Mate" single piggyback variable level float switch (VLFS) allows you to convert a 115 V nonautomatic pump into an automatic pump. Additionally, the piggyback float switch allows you to adjust the on and off point within the tank. So, it is ideal for deeper basins and pump tanks. The piggyback float switch is constructed of PVC and polypropylene. The materials of construction enable the switch to withstand the harsh wastewater environment. The standard cord length is 15' which is more than enough for most basin or pump tank applications. It is also a normally open mechanical float, so it can be used to … |  |
 | Zoeller 10-1883 Variable Level Control Switch 50' Narrow Angle Zoeller narrow angle level control float are used to monitor liquid level conditions and activate control panels or alarms. This switch comes with a 50' cord and weight. They are typically installed in dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. The variable level control switch is normally open when hanging vertically above the liquid level. The switch should be mounted to the weight that is provided, giving the switch a pivot point. When the water level rises and the switch is raised a few degrees above the horizontal position, the switch closes, completing the circuit to … | |
 | Zoeller 10-0744 Variable Level Switch (115/230V 5A) with 20' Cord Zoeller variable level control switch can be used to monitor liquid level conditions in pump tanks and lift stations. This particular float comes with a 20' cord. Intended for use with a control panel, the variable level control switch can be used to activate pumps or alarms. Some of the more common places the switch is used include pump chambers, dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. This variable level control switch is normally open when hanging vertically above the liquid level. The switch is engaged when the rising water level lifts it a few degrees above horizontal.… | |
You may be interested in
 | Zoeller 10-1877 Variable Level Switch (115/230V 5A) with 25' Cord Zoeller narrow angle level control float are used to monitor liquid level conditions and activate control panels or alarms. They are typically installed in dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. The variable level control switch is normally open when hanging vertically above the liquid level. The switch should be mounted to the discharge pipe or float tree using a stainless-steel pipe clamp and plastic clip. This connection gives the float a pivot point when the water level rises in the basin. When the water level rises and the switch is raised a few degrees above … | |
 | Zoeller 10-1879 Variable Level Switch (115/230V 5A) with 50' Cord Zoeller variable level control switch can be used to monitor liquid level conditions in pump tanks and lift stations. This particular float comes with a 50' cord. Intended for use with a control panel, the variable level control switch can be used to activate pumps or alarms. Some of the more common places the switch is used include pump chambers, dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. This variable level control switch is normally open when hanging vertically above the liquid level. The switch is engaged when the rising water level lifts it a few degrees above horizontal.… | |
 | Zoeller 10-0055 Switch-Mate Float Switch Variable Level 115 Volt 13 Amp The "Switch Mate" single piggyback variable level float switch (VLFS) allows you to convert a 115 V nonautomatic pump into an automatic pump. Additionally, the piggyback float switch allows you to adjust the on and off point within the tank. So, it is ideal for deeper basins and pump tanks. The piggyback float switch is constructed of PVC and polypropylene. The materials of construction enable the switch to withstand the harsh wastewater environment. The standard cord length is 10' which is more than enough for most basin or pump tank applications. It is also a normally open mechanical float, so it can be used to pump the … | |
 | Zoeller 10-0063 Switch-Mate Piggyback Variable Level Float Switch 115V with 20' Cord Known as the "Switch Mate", the single piggyback variable level float switch (VLFS) allows you to convert a 115 V nonautomatic pump into an automatic pump. Additionally, the piggyback float switch allows you to adjust the on and off points within the tank. This is ideal for deeper basins and pump tanks. The piggyback float switch is constructed of PVC and polypropylene. The materials of construction ensure that the switch is able to withstand a harsh wastewater environment. The standard cord length is 20' which is more than enough for most basin or pump tank applications. It is also a normally open mechanical … | |
 | Zoeller 10-0743 15' Variable Level Control Switch Zoeller variable level control switch can be used to monitor liquid level conditions in pump tanks and lift stations. This particular float comes with a 15' cord. Intended for use with a control panel, the variable level control switch can be used to activate pumps or alarms. Some of the more common places the switch is used include pump chambers, dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. This variable level control switch is normally open when hanging vertically above the liquid level. The switch is engaged when the rising water level lifts it a few degrees above horizontal.… | |