Submersible (Drainage) Pumps

Thermal overload protection, Stainless Steel bottom screened inlet
Replaceable tether float switch
Permanent split capacitor motor with thermal overload protection
ECC29-15.50
Cast Iron, 1/2 horsepower
1/2 horsepower
Thermal overload protection
1-1/2 inch NPT discharge

Features 2 inches NPT discharge capable of handling up 2 inches solid 3/4 inches solids
Comes with 115-volt, 1/2 horsepower rating
Features cast iron housing with oil filled motor. includes 10-feet power cord
WCC17-20.50
Cast Iron, Oil-filled motor
Oil-filled motor
10-ft power cord included
1/2 horsepower

Liquid type: clean water
Uses: domestic
Applications: water supply systems, pressure systems, irrigation pumps
typology: surface
Family: peripheral
Performance Range: Flow rate up to 11 GPM Head up to 130ft.
Temperature of the liquid from -10 °C to +60 °C
Ambient temperature up to +40 °C (+50 °C for PK 60)
Manometric suction lift up to 8 m
working pressure: – 6 bar for PK 60, PK 60-MD, PK 65 – 7 bar for PK 70, PK 80 – 10 bar for PK 90, PK 100, PK 200, PK 300

STANDOUT PERFORMANCE - The Kärcher SP 22,000 Dirt Submersible Dirty Water Pump can pump up to 22,000 liters of water per hour, even if it is dirty water with particles up to 30mm
For demanding jobs: the submersible pump is ideal for extracting water from large garden ponds, construction ditches or flooded basements
Height adjustable float switch: can be fixed to the equipment or be adjusted in height. In this way, it is possible to pump the water up to the remaining water level of 35 mm
For heavily dirty water: if the water is heavily dirty, the built-in stainless steel pre-filter can be used to protect the pump impeller from small branches and similar elements
Delivery: Kärcher SP 22.00…

Robust pre-filter.
Click-System.
Mesh width: 5 mm.

Easy to Install
Wet Rotor Design
Single Stage Motor
Heating systems
Open and closed systems

TERMINAL BOX FOR UPC50-160,UMC80-80

TERMINAL BOX FOR UMC50-80,UMC65-40

TERMNAL BOX FOR UPC65-160

HEAD FOR UPS40-160/2 115V 1PH

1-phase motor
Circulator pump with relay
Rated Voltage: 230V. Frequency: 60 Hz
Flange Standard: USA Oval. Pipe Connection: GF 40/43
Pressure Stage: 145 PSI. Max. Operating Pressure: 145.04 PSI

Efficient and powerful: within one hour, the pump creates up to 11,000 litres of clear and slightly soiled water with a discharge head of 7 m and a max. Power pressure of 0.7 bar
Automatic function: when the water level is reached, the pump automatically switches on or off using the adjustable float switch. Can be switched to continuous operation if desired
Safe operation: the submersible pump allows flat suction up to 2 mm. In addition, the stainless steel cover and the ceramic sealing system with triple sealing ensures a high level of durability
Clever design: thanks to the intelligent design, the pump is designed to be safe and stable during operation. In addition, hoses can be attached …

Système automatique pratique : une électronique intégrée avec pressostat active la pompe en cas de besoin (p. ex. activation de la chasse d'eau) puis l'éteint automatiquement
Résistante : la pompe est fabriquée à partir de matériaux de haute qualité, ce qui garantit une longue vie et un fonctionnement sûr sous l’eau
Facile à utiliser : un filin de suspension solide sur la pompe permet de la mettre facilement dans l'eau ou, si nécessaire, de la remonter, une poignée pratique permet un transport confortable
Universellement compatible : le raccord fileté intégré de la pompe répond aux normes internationales et peut être facilement raccordé aux systèmes / tuyaux usuels
La livraison com…

Dirty Water Submersible Pump 20000
Dirty Water Submersible Pump 20000 Gardena
Gardena. The products of this brand are made with the best quality materials.

Original Gardena System parts: For the transition from water pumps to Original Gardena System hoses
Connecting thread: 42 mm (G 5/4 Inch) / 33.3 mm (G 1 Inch)
Simple connection: pump is practical and easily connected to the hose system Original Gardena
Scope of delivery: 1x Gardena Submersible Pump Connector 42 mm

Range of application: The pump is suitable for the discharge or pumping of clean water (max. 5 mm dirt particles) from tanks, water tanks, shafts or garden wells.
Power - The 220 watt motor with thermal overload protection allows a delivery capacity of 7,500 litres per hour with a maximum supply pressure of 0.6 bar.
Head - The submersible pump can pump water up to a height of 6 m. During water drainage, the pump provides a shallow suction up to a residual height of 5 mm of the water level.
Efficient float switch - The infinitely adjustable float switch switches the pump on and off automatically at a preset water level.
Robust pump - The housing of the submersible pump is made of impact-resistant …

The GE-SP 18 Li Cordless Clear Water Pump is a powerful tool from the high-performance Power X-Change range. This pump is ideal for all situations requiring pumping water without connection to a power supply.
The benefits are obvious: with Einhell's new generation of durable wireless devices, there are no limitations on the scope of use or annoying cables. The powerful motor delivers a discharge rate of up to 5,000 litres of clear water per hour.
This clear water drain pump is compatible with all high-performance lithium-ion batteries in the Power X-Change range. The battery and charger are available separately, especially in the handy Starter Kit.
The long connection cable to the battery …

Power X-Change family member, need 1 x 18V battery
Flexible battery box with integrated cord storage
Stepless telescopic connection tube
Flexible gooseneck with hose connection
Long wire connection for greater immersion depth
High power motor generates high drive pressure
High quality pump housing made of impact resistant plastic

Scope of application: the Einhell GE-DP 900 Cut dirty water pump is suitable for pumping larger quantities of dirty water from ponds, excavations and basements.
Moc – silnik o mocy 900 watów z termicznym zabezpieczeniem przed przeciążeniem umożliwia moc tłoczenia 16,000 litrów na godzinę z maks. ciśnieniem tłoczenia 1,15 bar z maks. głębokości 7 m.
Cutting mechanism – The dirty water pump has a cutting mechanism system to grind solid bodies and can suck dirt particles with a maximum diameter of 35 mm.
Practical float switch – infinitely adjustable, external float switch turns the pump on and off automatically in the pre-set water state.
Sturdy pump - The housing of the dirty water pump i…

Application - The pump is suitable for thorough cleaning of dirt water from ponds, dimples, cellars and rainwater.
Power - The 900 Watt strong motor with thermal overload protection allows for a pump output of 22,000 litres per hour with a maximum pump pressure of 0.9 bar.
Pump height and submersible depth - The dirt water pump can pump water from a maximum of 7 metres depth at a pump height of 9 meters.
Practical float switch - The continuously adjustable float switch automatically turns off and turns on the pump at a set water level.
Robust pump - The dirt water pump housing is made of impact-resistant plastic. The pump can suck up particles and dirt with a maximum diameter of 40 mm.
SEAL …

Pumps up to 3500 GPH and up to a maximum vertical lift of 24-feet
Fiberglass reinforced thermoplastic construction is durable lightweight and easily portable.
Durable impeller & removable intake screen prevents clogging and will handle up to 3/8 in. solids
10-foot Tethered piggy-back float switch
1-1/2 in FPT discharge ready to install in most applications

Pumps up to 4000 GPH and up to a maximum vertical lift of 26-feet
Fiberglass reinforced thermoplastic construction is durable lightweight and easily portable.
Durable impeller & removable intake screen prevents clogging and will handle up to 3/8 in. solids
10-foot Tethered piggy-back float switch
1-1/2 in FPT discharge ready to install in most applications