Other Garden Equipment

Qik Joe Polar Express will outperform others in its class because of its special time release formula. Qik Joe Polar Express activates quickly. In addition, the various components melt at different speeds, allowing melting to occur over an extended period of time. Qik Joe Polar Express offers a high degree of ice melting action because of its high percentage of Calcium Chloride. The Calcium Chloride acts as a catalyst, activating the other components of this high performance blend.

Qik Joe Quad Melt Ultra with CMA offers a high quality blended enhanced buffer system treated with non-corrosive glycol to enhance performance. Qik Joe Quad Melt Ultra with CMA is colored pink to help prevent over application, ensuring total coverage, thus making Qik Joe Quad Melt Ultra with CMA a complete ice control agent. Qik Joe Quad Melt Ultra with CMA should be spread prior to snowfall to make shoveling easier and will continue to work down below zero. *

Qik Joe Safe Pet Ice Melt contains high quality Magnesium Chloride Pellets and does not contain salt of any kind. It is environmentally safe ~ Unlike so many other ice melting agents. When used as directed, Qik Joe Safe Pet should not harm good quality air-entrained concrete grass shrubs or carpet. Qik Joe Safe Pet wont leave an oily dirty residue. This product will prevent ice and snow from re-bonding, even at lower temperatures.

A proven ice melter that is safe for pets. For use on sidewalks, driveways and parking area etc. Formulated with a green color indicator for even coverage.

A proven ice melter that is safe for pets. For use on sidewalks, driveways and parking area etc. Formulated with a green color indicator for even coverage.

Sure Grip with Traction Control Ice Melt is a product that offers both safety and security for our price sensitive customer. Sure Grip with Traction Control Ice Melt was specially formulated to provide instant ice melting action along with the additional benefit of traction for added safety. One of the main components is Calcium Chloride which acts as a catalyst to activating the other components of this enhanced blend.

Sure Grip with Traction Control Ice Melt is a product that offers both safety and security for our price sensitive customer. Sure Grip with Traction Control Ice Melt was specially formulated to provide instant ice melting action along with the additional benefit of traction for added safety. One of the main components is Calcium Chloride which acts as a catalyst to activating the other components of this enhanced blend.

Create a watertight connection in your 1/2 in. distribution line using the 1/2 in. Compression Coupling. The coupler is used to connect two sections of 1/2 in. supply tubing or dripline together. No need to stretch the tubing end over the fitting barb-with the compression fitting, simply insert the tubing end inside the compression ring, where an internal barb compresses into the tube to hold it in place. Made for durability, the compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Need to water two areas with different watering needs? You can use the Compression Inline Valve to control the flow of water to two separate watering circuits, irrigation zones, or different types of plants from one valve. Adjust, balance, or shut off water with a twist of the dial. Deliver water to two areas that do not require the same amount of water, such as new plantings vs. established plants, or two areas with distinct types of plants. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Compression fittings on both sides of the valve accommodate 1/2 in. supply tubing with 0.700 in. outside diameter (OD). The 1/2 in. Compression Inline Valve is made of ABS treated …

Make the transition from PVC pipe to distribution tubing or dripline with the 1/2 in. X 1/2 in. Slip PVC Compression Adapter. To install, simply slide the 1/2 in. fitting onto PVC pipe and solvent weld for a watertight connection; insert 1/2 in. supply tubing into the compression ring on the other side, where an internal barb holds the tubing in place. This adapter is made of polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS), treated with UV inhibitors to prevent cracking.

Make the transition from PVC pipe to distribution tubing or dripline with the 5/8 in. X 1/2 in. Slip PVC Compression Adapter. This adapter is made of polyvinyl chloride (PVC) and acrylonitrile butadiene styrene (ABS), treated with UV inhibitors to prevent cracking.

Build, repair, or expand your drip irrigation project with the 1/4 in. Barbed Coupling. The micro fitting connects 2 sections of 1/4 in. supply tubing or dripline together, or connects a 1/4 in. feeder line to a punched hole on a supply line. The single-barbed coupler has an extended barrel length making it easier to grip to insert into tubing. If you have trouble fitting it into tubing, try soaking the tube opening in hot water or leaving out in the sun to soften the material. Micro fitting is reusable and made of acrylonitrile butadiene styrene (ABS).

"The 1/4 in. Barbed Cross connects four sections of 1/4 in. supply tubing or dripline for a ""+"" intersection. It also connects three 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it's easier to work with by soaking in hot water or leaving out in the sun for pliability)."

Insert a 90 bend to your drip system with the 1/4 in. Barbed Elbow. This micro fitting connects two sections of 1/4 in. supply tubing or dripline, or connects 1/4 in. tubing to a punched hole on any size supply line. To install, insert the single-barbed tip inside the drip tubing opening and anchor in place. For rigid tubing, try soaking the tube in hot water or leaving out in the sun to make it more pliable. Use the fittings to set up a new drip system or expand or repair an existing system. Reusable micro fitting is made of acrylonitrile butadiene styrene (ABS).

Elevate the emitter in your drip system using the 12 in. Riser with 1/4 in. Barbed Inlet. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet on top of the riser. The riser is recommended to be placed on a 13 in. support stake, and has a barbed inlet which fits 1/4 in. supply tubing. Position riser to help provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

For more than 30 years, Raindrip, Inc. has been a leader in efficient irrigation solutions for the residential market producing innovative products.

Create a transition from your main line pipe or manifold to 1/2 distribution tubing or dripline with the 1/2 in. X 3/4 in. FPT Compression Swivel Adapter. Convenient built-in swivel enables the end of the fitting to turn when attaching or removing it to keep tubing straight and prevent kinking. The fitting threads onto a 3/4 in. MPT connection point on one end and receives 1/2 in. tubing on the other end, where an internal barb compresses the tube for a watertight fit. This compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

The fuss-free way to add a supply line to your drip system water source is with the 1/4 in. X 3/4 in. FHT Compression Swivel Adapter. Thread adapter onto a hose bibb or garden hose on one end, and insert 1/4 in. supply tubing or dripline into the compression ring, where an internal barb compresses the tubing to hold it in place. The built-in swivel allows you to screw or unscrew the adapter without kinking the tubing. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Transfer water from your main line pipe or manifold to 1/2 distribution tubing or dripline with the 1/2 in. X 3/4 in. FPT Compression Swivel Adapter. Convenient built-in swivel enables the end of the fitting to turn when attaching or removing it to keep tubing straight and prevent kinking. The fitting threads onto a 3/4 in. MPT connection point on one end and receives 1/2 in. tubing on the other end, where an internal barb compresses the tube for a watertight fit. This compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

The fuss-free way to add a supply line to your drip system water source is with the 1/4 in. X 3/4 in. FHT Compression Swivel Adapter. Thread adapter onto a hose bibb or garden hose on one end, and insert 1/4 in. supply tubing or dripline into the compression ring, where an internal barb compresses the tubing to hold it in place. The built-in swivel allows you to screw or unscrew the adapter without kinking the tubing. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Connect your drip tubing or dripline to your water source with the 1/2 in. X 3/4 in. FHT Compression Swivel Adapter. Designed for convenience, the built-in swivel keeps the tubing from bending and kinking when installing the adapter in place. Threads onto a hose bibb or garden hose on one end; 1/2 in. supply tubing inserts into the compression ring on the other end, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. Compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Create a watertight connection in your drip system tubing with the 5/8 in. Compression Coupling. Use the coupler to join two sections of 5/8 in. supply tubing or dripline together. To install, insert the end of the tubing into the compression ring where an internal barb compresses the tube with a firm grip, and repeat on the other end of the fitting. Durable and weather resistant, the compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Simplify watering to two areas with different watering needs with the Inline Valve. Use to control the flow of water to two separate watering circuits, irrigation zones, or different types of plants from one valve. Adjust, balance, or shut off water with a twist of the dial. Deliver water to two areas that do not require the same amount of water, such as new plantings vs. established plants, or two areas with distinct types of plants. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Compression fittings on both sides of the valve accommodate 5/8 in. supply tubing with 0.700 in. outside diameter (OD). The 5/8 in. Compression Inline Valve is made of ABS treated with …

The best solutions are sometimes as simple as the Tubing End Clamp, which stops the flow of water in your tubing or dripline. Simply fold the end of 1/4 in. tubing over to create a kink, then slide the end clamp over the kink, securing it into place. Easy to use and economical, the clamp is removable, reusable, and works with any low-flow system. The end clamp is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.