Camcorder Accessories Wooden Camera

This 15mm diameter iris rod from Wooden Camera (SKU: 15MM-ROD) is an industry standard used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. This version comes in a 6-inch length (142300) and weighs in at 0.16 lbs (72g). Wooden Camera 142300 15mm Rod - 6”.

Wooden Camera offers this 15mm diameter iris rod (SKU: 15MM-ROD) which is an industry standard used for mounting accessories like follow focus, matte boxes, lens support, servo motors, and more. This version comes in a 9-inch length (142400) and weighs in at 0.24 lbs (110g). Wooden Camera 142400 15mm Rod - 9”.

The 142600 from Wooden Camera is a useful accessory in the form of a 15mm diameter iris rod used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. This model comes in a length of 15-inches while weighing only 0.63-pounds.NOTE:** Sold as single rod. If more rods are required, please specify at time of purchase. ** Wooden Camera 142600 15mm Rod 15” in Length.

Presented here is an individual 18-inch long 19mm Support Rod crafted by Wooden Camera, meticulously engineered for the purpose of mounting accessories. Each terminus of the rod is chamfered, serving to facilitate the seamless sliding of accessories onto and off the rod. Noteworthy is its hollow interior design, strategically implemented to maximize structural strength, ensuring optimal durability and robust support for mounted accessories.Wooden Camera 143400 Features:Single, 19mm Rod, (18") LengthChamfered EndsWooden Camera 143400 Specifications:Rod Size: 19 mmRod Length: 18" (46 cm) Wooden Camera 143400 19mm Rod (18”).

For use with larger and heavier accessories such as follow focus, matte boxes, lens support, servo motors, and more - this 15mm diameter iris rod from Wooden Camera (SKU: 15MM-ROD) is essential. An industry standard, this version comes in a 24-inch length (142800) and weighs in at 1.04 lbs (470g). Wooden Camera 142800 15mm Rod - 24”.

The Easy Riser (RED DSMC2) from Wooden Camera (SKU: 213700) is a riser shim plate compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. This model when combined with Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) or other RED style bridge plates allows for correct lens height studio rods. Combine with LW 15mm Bracket (Weapon/Epic-W/Scarlet-W/Raven) for lightweight rods at correct lens height.SPECIAL NOTE: This riser is also compatible with Wooden Camera's original LW 15mm Bracket for the RED Epic/Scarlet.Wooden Camera Easy Riser (RED DSMC2) Includes:(2) Captured 3/8-16 riser screwsWooden …

A great option for mounting EVF Mounts, handles, external monitors, and more this Wooden Camera top plate is designed for the Canon C300mkII camera. This top plate comes with arrays of 1/4-20 holes in standard 9mm spacing. Multiple 3/8-16 holes are also available for large accessories. An ARRI standard accessory mount on top and the sides, while a Universal Hot Shoe for attaching the Canon C300mkII LCD Unit is included.To build a cage with this Top Plate, choose Unified Baseplate (C300mkII) also available from Wooden Camera.NOTE:Some gear shown above is NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.Includes(3) 1/4-20 x 3/8" socket …

The Panasonic EVA-1 Handgrip Relocator (SKU:257000) from Wooden Camera is intended for the Panasonic EVA-1 Cinema Camera and allows for the original Panasonic control handle to be attached to an ARRI Rosette. The kit also includes a LANC extension cable plus cable wrap. This product works great with the Rosette Bracket, 15mm Rod Clamp to ARRI Rosette, or 19mm Rod Clamp to ARRI Rosette. For attaching to gimbal handlebars, you can use the Gimbal ARRI Rosette v2 (25mm, 1 inch) for MOVI and Ronin M, and the Gimbal ARRI Rosette v2 (30mm) for the original Ronin and the Movi Pro ring. You can also incorporate the EVA-1 Handgrip Relocator into the Shoulder Rig v2 for comfortable handheld shooting.SpecificationsSKU: …

Dovetail Clamp adapts any camera system, baseplate, or accessory to an ARRI standard dovetail. Great for use with Wooden Camera's Universal Baseplate and Easy Riser systems.Includes:2x 3/8-16 low profile screws2x 1/4-20 low profile screws Wooden Camera DOVETAIL-CLAMP Dovetail Clamp for ARRI Standard Dovetail.

The 151200 is a 12" long ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes are useful for accessory mounting and tripod attachment. This Safety Dovetail can also be attached to Shoulder Pad for custom handheld configurations.ApplicationsDesigned for Manfrotto, Miller, Cartoni, and more.SpecificationsSKU: 151200Weight: 427g (0.9 lbs)Dimensions: 304.8 x 68.4 x 13.4 mm (12.0 x 2.7 x 0.5 in) Wooden Camera 151200 Safety Dovetail 12 in Length.

Utilize the L-shaped Vertical Camera Bracket manufactured by Wooden Camera for the secure mounting of your heavy-duty camera equipment. Crafted with precision through CNC machining from durable aluminum, this bracket is equipped with numerous 1/4"-20 and 3/8"-16 threaded mounting apertures, alongside spacious pass-through slots designed to accommodate cabling requirements. Employ it for mounting onto cameras, dovetail mounts, tripod plates, and various accessories. The bracket is supplied with two 1/4"-20 low-profile screws and two 3/8"-16 low-profile screws for convenient installation.Wooden Camera Features:Versatile Mounting Options with Multiple 1/4"-20 and 3/8"-16 ThreadsEnhanced Connectivity …

The 279500 Top Handle Kit is specifically designed for compatibility with RED KOMODO and ARCA Swiss systems, catering to the unique requirements of professional filmmakers and photographers. This kit provides a robust and ergonomic top handle solution, enhancing the maneuverability and handling of the camera equipment. Crafted with precision, the handle ensures a secure grip and ease of control during dynamic shooting scenarios. Additionally, its integration with the ARCA Swiss system emphasizes versatility and seamless compatibility, allowing for swift transitions between different camera setups. The 279500 Top Handle Kit serves as an essential accessory for users seeking optimal functionality …

The Sony FS7 is a top plate for the Sony PXW-FS7 and FS7mkII cameras. This top plate features 1/4-20 holes in standard spacing and multiple 3/8-16 holes for large accessories. Tt includes a tape hook for accurate focus measuring and the ARRI accessory mount is also available in several places (3/8-16 screw hole with locating pins adjacent). The original Sony handle can be reinstalled by removing the center section of the top plate and communication between the handle and the Sony body is possible by using just the U shaped portion of the top plate. The Sony XDCA-FS7 (V-Mount/ProRes module) can also be attached to the rear of the camera without obstruction.Sony FS7/193900 Includes:(6) 1/4-20 …

Wooden Camera Top Plate for Sony FX9Top Plate (Sony FX9) is a top cheeseplate for the Sony FX9 that fits to the shape of the camera body. There are 1/4-20 holes in standard spacing and multiple 3/8-16 holes with ARRI accessory mounts are also available in several places. Original Sony handle can be reinstalled by removing the center section of the top plate. Communication between the handle and the Sony body is possible by using just the U shaped portion of the top plate.Wooden Camera 275100 Includes:Qty (4) 1/4-20 x 1/2" screws (for attaching top plate directly to camera)Qty (1) M2 Philips screw (for relocating the Sony cable clamp onto the side of the top plate)Wooden Camera 275100 Features:Top …

Wooden Camera's Pass Through Top Plate (SKU: 229400) provides 26pin LCD connection and 3pin trigger handle interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws.This Pass Through Top Plate is compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. This product is great for adding mounting points to your DSMC2 camera and allows for other cage and cable components like our Safety NATO Arm (Weapon/Epic-W/Scarlet-W/Raven) and RED Male Pogo to Female Pogo LCD/EVF …

This Unified VCT Wedge Plate from Wooden Camera (SKU: 223300) is a Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates. Wooden Camera's special reduced height ARRI dovetail shape allows each Unified camera rig to be quickly installed and balanced properly over your shoulder. Safety pin and stopper screws on the ends prevent accidental removal.Threaded M6 ARRI standard rosettes are found on each side and can be combined with our Rosette Standoffs and Rosette Arms for a quick, handheld configuration. Also present are 1/4-20 threaded holes and the ARRI standard accessory mounts (3/8-16 threaded hole with locating pins adjacent). At the rear of the wedge plate, …

The Unified Bridgeplate (19mm) from Wooden Camera (SKU: 223100) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). This new design allows the Bridgeplate to be converted from RED standard height to ARRI standard height making it compatible with any type of camera rig. A rubberized top coating prevents twisting and the slotted design accommodates non-standard screw spacings.When properly installed and combined with Unified Baseplates for correct rod height on cameras like Sony FS7, FS5, F55/F5, Canon C100mkII/C300mkII, C100C300/C500, Blackmagic URSA Mini, Panasonic VariCam 35, VariCam LT, and risers for RED Weapon/Scarlet-W/Epic-W/Raven, and Epic/Scarlet.…

Wooden Camera's Unified Baseplate (part no. 222100) is specifically designed for the Sony FS7 and Canon C100mkII, C300mkII, C100, C300, and C500 cameras. This quick release baseplate provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm rods or to leave them behind.To remove the camera and leave the 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate …

This top plate from Wooden Camera (SKU: 213900) is designed for RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. It comes with arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. The Easy Top attaches to top of the camera by using (4) 1/4-20 captured screws.The Easy Top (RED DSMC2) comes with LCD/EVF interfaces included. One is located under the front portion of the top plate and one is included via the tethered side attachment. Both convert the LCD/EVF pogo pins to the standard 16pin LEMO compatible connectors which are found on …

The Blackmagic Studio Unified Camera Accessory Kit (Base), model#: 184500 from Wooden Camera, is a basic camera support package specially designed for use with the Blackmagic Design Studio Camera. This accessory package includes:Unified Baseplate(URSA Mini, Sony F55, F5), a fixed baseplate that holds the two (2)15mm Rods (12")at the correct lens height, along with theNATO Handle Kit (Plus, 100mm), a quick-release handle that attaches to the top of the camera.The Unified Baseplate (URSA Mini, Sony F55, F5) is a quick-release baseplate that offers lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate …

UMB-1 Universal Mattebox (Base) comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm diameter opening, a height adjustable 15mm LW rod bracket which can be adapted to studio rods a universal cloth donut with easy to grab finger loops, and NATO standard accessory rails on left, right, and top for attaching accessories. The UMB-1 is designed to be user upgradable and quick to transition from base, to clamp on, to swing away, to ultralight when using a stabilizer. Upgradable to Swing Away or Clamp On versions when needed.Wooden Camera UMB-1 Univeral Mattebox Base Includes:Height adjustable 15mm LW rod …

UMB-1 Universal Mattebox (Pro) is natively 15mm LW rod based and comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm native diameter opening, NATO standard accessory rails on left, right, and top for attaching accessories, ARRI style rubber bellows with 114mm standard opening, a complete set of bellows reduction rings, a universal cloth donut for non-standard lens diameters, a height adjustable swing away bracket, left and right side flags, bottom flag, and a full set of clamp on adapter rings. The UMB-1 is designed to quickly transition from swing away, to clamp on, to ultralight when using a stabilizer.…