Car Subwoofers

Measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications
Features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling
Front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.
Steel mounting brackets allow for flexible installation in many areas and vehicle types
Gen2 DD-Linear Magnetic Circuit technology, a compact and effcient dual-gap voice coil structure, allows for better control over the motor

Measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.
Features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling
Front-mounted magnet motor allows the enclosure to have an extremely shallow footprint
Four adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types
Compact and efficient dual-gap voice coil structure, allows for better control over the motor

The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass.
Unique ProLink Design – ProLink is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure.
Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic.
Improved Performance – The new R-Series subwoofers now feature larger, do…

R-SB12V - 750W RMS power handling
Ported enclosure design
Includes preloaded R-W12D4 12” R-Series subwoofer
Power output 2-Ohm @ 14.4 Volts: 600 W RMS X 1
Power output 4-Ohm @ 14.4 Volts: 330 W RMS X 1

R-SB12V - 750W RMS power handling
Ported enclosure design
CTA-2006-B Power Rating: 500W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N). 750W RMS x 1 (2ohm, 14.4V≤ 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohm), 106dB (at rated power)
Includes wiring

300-Watt sound upgrade features a powered subwoofer, 4-channel compact amplifier and remote bass knob including installation accessories
The pre-assembled amplifier and subwoofer kit mounts under the glove compartment with supplied bracket for improved sound performance while saving trunk storage space in your Mustang.
Works with the factory Mustang radio* or other aftermarket radio.
*Not compatible with the optional factory premium 9-speaker stereo system.

300-Watt sound upgrade features a powered subwoofer, 4-channel compact amplifier and remote bass knob including installation accessories
The pre-assembled amplifier and subwoofer kit mounts under the passenger’s seat for improved sound performance while saving trunk storage space in your Corolla.
Works with the factory Toyota radio* or other aftermarket radio.
*Not compatible with the factory premium amplified system.

Fits the RS-W10D4 and RS-W10D2/ Durable Construction/ Sleek Finish/ Easy Installation/ Black Finish

Black metal mesh grille
Fits the R2-W8D4 and R2-W8D2
Protect your subwoofer with a sleek and durable grille for your Alpine subwoofer.

Black metal mesh grille
Fits the R2-W12D4 and R2-W12D2
Protect your subwoofer with a sleek and durable grille for your Alpine subwoofer.

Black metal mesh grille
Fits the R2-W10D4 and R2-W10D2 subwoofers from Alpine
Protect your subwoofer with a sleek and durable grille for your Alpine subwoofer.

These enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications.
Integrated Amp Tray – Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately).
Reliable Performance – The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer.
Alpine Halo Design – The enclosure pulls design cues from the Alpine Halo Displa…

Fits the S-SB12V and R-SB12V 12" Alpine Halo Preloaded Subwoofer Enclosures
Heavy-duty steel rear link bracket
Heavy-duty steel port link bracing
Stainless steel Alpine badge
All hardware included

Fits the S-SB10V and R-SB10V 10" Alpine Halo Preloaded Subwoofer Enclosures
Heavy-duty steel rear link bracket
Heavy-duty steel port link bracing
Stainless steel Alpine badge
All hardware included

Compatible with 2002-2015 Dodge Ram Quad / Crew Truck Alpine SWT-10S2 Single 10" Rhino Coated Sub Box Enclosure - Final 2 Ohm

Package Includes: (2) Memphis Audio MJP1044 10" 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub
Memphis Audio MJP1044 10" 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub.
Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 10 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 83.77 dB. DEPTH: 5.72 Inch. CUT OUT: 9.45 Inch.
Thiele Small Parameters: Resonant Frequency (fs): 39.3 Hz. Mechanical Q (Qms): 6.014. Electrical Q (Qes): 0.682. Total Q (Qts): 0…

Powder Coated Cast Aluminum Frame/ Heavy Duty Magnetic System/ High Role Rubber Surround/ Gold Plated Screw Down Binding Posts/ Black Finish

1, 200w Max / 300w RMS
2 ohms Single Voice Coil
Rubber Surround
Fully Covered Steel Mesh Grille
Carpeted Enclosure with Embroidered Logo

12' passive subwoofer Delivers authoritative bass. New Voice Coil Cooling System (VCCS) IMPP cone produces tight and accurate bass 1400 Watts Max Power (400 Watts Nominal)

For select model years 2015-2018, kick up the sound in your Ranger with the Stage 2 kit, featuring everything in the Stage 1 kit, plus front speaker enclosures specifically designed for your Ranger and an exceptional pair of Rockford Fosgate speakers

Enjoy premium sound quality even with your top off! The PSS-23WRA2 is a 300-watt sound system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-23 Jeep Wrangler Unlimited JL and Jeep Gladiator JT.
The PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s foot well area to maximize bass extension throughout the Jeep for improved bass you can feel.
The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier mount directly under the passenger’s seat with the included mounting brackets and come pre-connected for easy, bolt-in installation.
The included SPR-10TW-WRA High-Performance Component Tweeters replace the factory twee…

The M1D4-8 Color Optix 8” DVC 4-Ohm marine subwoofer delivers loud, clear, accurate bass, and lights the way for your journey!
The M1D4-8 marine subwoofer has a power handling of 150 Watts RMS / 600 Watts Peak and connects with the Rockford Fosgate Color Optix Controller and RF Connect App (PMX-RGB sold separately), allowing you to customize your own color patterns
To compliment the plug and play connectivity and streamline installation, M1 subwoofers are equipped with a VersaSwitch to make changing impedance between 2 and 8 ohms as easy as flipping a switch
The Element Ready design and IP67 certification makes them truly purpose-built for marine applications where protection from damaging UV…

Optically Clear UV Stable RGB Lighting Encapsulation/ 2 " (50mm) High Temp Kapton Woofer Voice Coil Former/ Linear Synthetic Fiber Blend Spiders/ 100% UV Stable Centrex Plastic Grill/ Co-Molded Surround And Mineral Filled Polypropylene Cone Body/ IPX6 Water Intrusion Rated/ 300 Watts RMS / 1200 Watts PEAK Power Handling/ 2-Ohm or 8-Ohm Switchable Impedance/ White Finish

Get all the low-end performance of a ported enclosure in a fraction of the air space.
Now you have the freedom to create a custom box in the shape you want, in the color you want, with the materials you want.
You’ll make a custom enclosure that fits under a seat, behind the back bench or in the trunk with ease!
Your shape - our size. We custom weighted the KBRWs to exacting specifications, so you get the perfect tune.
All it needs is the right active sub in the recommended airspace for some serious custom bump!