Bike Wheels

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. GXP: - Spindle Interface Type: TruVativ GXP - BB Shell Width (mm): 68 , 73 , 83 - BB/Frame Interface: PF30 , BB30 BB30-SRAM: - Spindle Interface Type: TruVativ GXP - BB Shell Width (mm): 68 , 73 - BB/Frame Interface: BB30 - Weight: 48 BB30-SHIM: - Spindle Interface Type: Hollowtech II - BB Shell Width (mm): 68 , 73 - BB/Frame Interface: BB30 - Weight: 48 BB30-CAMP: - Spindle Interface Type: Ultra-Torque - BB Shell Width (mm): 68 - BB/Frame Interface: BB30 - Weight: 48

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. GXP: - Spindle Interface Type: TruVativ GXP - BB Shell Width (mm): 68 , 73 , 83 - BB/Frame Interface: PF30 , BB30 BB30-SRAM: - Spindle Interface Type: TruVativ GXP - BB Shell Width (mm): 68 , 73 - BB/Frame Interface: BB30 - Weight: 48 BB30-SHIM: - Spindle Interface Type: Hollowtech II - BB Shell Width (mm): 68 , 73 - BB/Frame Interface: BB30 - Weight: 48 BB30-CAMP: - Spindle Interface Type: Ultra-Torque - BB Shell Width (mm): 68 - BB/Frame Interface: BB30 - Weight: 48

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom …

United's Pre-Built BMX front wheel. This is the same high quality wheel which can be found on United's Supreme Complete bikes. The wheel uses a sealed bearing, low flange hub with 10mm female bolts and is laced into a wide profile double wall alloy rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Supreme Hub AXLE: Female RIM: Double Wall Pinned SPOKES: Straight Gauge NIPPLES: Alloy WEIGHT: 955g / 33.68oz

The Rant 18” Party On V2 Front Wheel has all the same great specs and value as its 20” brother. A wide and clean front hub with cones that are designed to accept the slide on plastic Party Guards. Spec’d with smooth rolling sealed bearings, tough double wall Rant Squad rim and 14 gauge spokes. This wheel makes a great replacement or upgrade. ###section### Product Specs WHEEL SIZE: 18" HUB: Rant Party On V2 AXLE: Female RIM: Rant Squad SPOKES: 14 Gauge NIPPLES: Alloy WEIGHT: 34.1 oz

Haro's Baseline Front Wheel is a solid option for upgrading the front end with something a little more reliable. The double-wall Baseline rim is built to be tough and reliable with straight gauge spokes lacing it to a fully sealed, CNC-machined Baseline hub that's smooth and massively durable. The rim measures in at 38mm wide by 16mm high with a 10mm chromoly axle through the middle to finish. ###section### Product Specs WHEEL SIZE: 20" HUB: Alloy Hub With Sealed Bearings AXLE: 10mm RIM: Alloy Rim With Double-Wall SPOKES: 14 Gauge NIPPLES: Steel WEIGHT: 1010g (2.22oz)

The ZX 333 front wheel is Cinema's most affordable wheel. Featuring the double wall pin joint 333 rim, laced 3 cross to a fully sealed hub with a 3/8” female axle. All Cinema wheels come with a Cinema rim strip and Cinema Nylon hub guards ###section### Product Specs WHEEL SIZE: 20" HUB: Sealed Cinema Hub AXLE: Female RIM: Cinema 333 SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 907g

Great quality replacement 14" front wheel from Salt. ###section### Product Specs WHEEL SIZE: 14" HUB: SALT “ROOKIE” FRONT HUB, LOW FLANGE, ALLOY, AXLE: 3/8" RIM: SALT “BEAM” RIM, SINGLE WALL, ALLOY, STRAIGHT SIDEWALLS SPOKES: TBC NIPPLES: TBC WEIGHT: TBC

Affordable but very well spec'd rear cassette wheel from Jet BMX. This Wheel uses a fully sealed 9t Cassette hub with a solid 14mm male axle laced onto a single wall 6061 aluminium rim with black spokes. RHD Only An Ideal wheel to upgrade or replace your current complete bike wheel ###section### Product Specs WHEEL SIZE:20" HUB:Fully Sealed 9t Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Right Hand Side RIM:6061 Alloy Single Wall SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC

A great value and dependable rear BMX wheel from Jet BMX. This BMX wheel is a 18" size and will fit any BMX bike made for 18" wheels and accept any 16" BMX tire. Features a sealed cassette hub for a smooth maintenance free ride with a 9t cog and 14mm axle. The single wall rim is made from durable alloy and is laced with stainless steel black coated spokes. ###section### Product Specs WHEEL SIZE:18" HUB:Jet Sealed Cassette AXLE:14mm Chromoly Male DRIVE SIDE:RHD RIM:Single Wall Alloy SPOKES:36 Straight Gauge Stainless NIPPLES:Brass WEIGHT:1080g

A great value and dependable rear BMX wheel from Jet BMX. This BMX wheel is a 16" size and will fit any BMX bike made for 16" wheels and accept any 16" BMX tire. Features a sealed cassette hub for a smooth maintenance free ride with a 9t cog and 14mm axle. The single wall rim is made from durable alloy and is laced with stainless steel black coated spokes. ###section### Product Specs WHEEL SIZE:16" HUB:Jet Sealed Cassette AXLE:14mm Chromoly Male DRIVE SIDE:RHD RIM:Single Wall Alloy SPOKES:28 Straight Gauge Stainless NIPPLES:Brass WEIGHT:995g

Fully sealed front wheel from Salt including super tough double wall Saltplus Summit rim laced to a Salt Everest, low flange, alloy, sealed bearing hub with a male 3/8" axle. ###section### Product Specs WHEEL SIZE: 20" HUB: Salt Everest AXLE: Male 3/8" RIM: Saltplus Summit SPOKES: Stainless Steel NIPPLES: Brass WEIGHT: TBC

Staystrong's Pre-built Soho rear wheel comprises of a Double wall 34mm wid alloy rim laced onto a fully sealed bearing 9t Freecoaster hub with trusted & tested internals. Using straight gauge steel spokes & brass nipples, Includes a Stay Strong rim tape. ###section### Product Specs WHEEL SIZE: 20" HUB: Sealed 9T Freecoaster AXLE: TBC DRIVE SIDE: Left Side Drive RIM: Double wall 34mm wid alloy rim SPOKES: Straight gauge steel NIPPLES: Brass WEIGHT: TBC

Staystrong's Pre-built Soho front wheel comprises of a double wall 34mm wide alloy rim laced onto a fully sealed bearing hub using straight gauge steel spokes & brass nipples, Includes a Stay Strong rim tape ###section### Product Specs WHEEL SIZE: 20" HUB: Fully sealed bearing hub AXLE: TBC RIM: Double wall 34mm wide alloy rim SPOKES: Straight gauge steel NIPPLES: Brass WEIGHT: TBC

Basic cassette wheel from Salt. The Rookie wheel features a semi sealed cassette that is laced to the Salt Beam alloy rim. ###section### Product Specs WHEEL SIZE:20" HUB:SALT “ROOKIE” REAR HUB, ALLOY, SEMI SEALED AXLE:14mm DRIVE SIDE:Right Side Drive RIM:SALT “BEAM” RIM, SINGLE WALL, ALLOY, STRAIGHT SPOKES:TBC NIPPLES:TBC WEIGHT:TBC

The Salt Ex front wheel is made up of the reinforced, single wall Salt Valon rim laced to the fully sealed Salt Ex hub. Comes with 2 nylon hubguards, 3mm oversize pins and includes rim tape. ###section### Product Specs WHEEL SIZE: 20" HUB: Salt Ex AXLE: 10mm Male RIM: Salt Valon SPOKES: 36 NIPPLES: TBC WEIGHT: TBC

Dependable and affordable Pro sized 20” BMX Racing wheelset from Jet BMX. The wheelset features sealed bearings throughout, a lightweight alloy construction and dependable double wall rims, A great wheelset for those looking to re-vamp their race bike without breaking the bank. The alloy hubs feature low flanges and 10mm axles running on super-smooth sealed bearings with the rear ready to accept a 16t freewheel. The rims are constructed from lightweight 6061 alloy and feature a durable double wall design and made to accept regular Schrader car type valves. Laced together with 32 high-quality stainless-steel spokes with brass nipples. ###section### Product Specs WHEEL SIZE:20"

Dependable and affordable Mini, Junior & Expert sized 20 x 1-1/18" BMX Racing wheelset from Jet BMX. The wheelset features sealed bearings throughout, a lightweight alloy construction and dependable double wall 1-1/8" rims, A great wheelset for those looking to re-vamp their race bike without breaking the bank. The alloy hubs feature low flanges and 10mm axles running on super-smooth sealed bearings with the rear ready to accept a 16t freewheel. The rims are constructed from lightweight 6061 alloy and feature a durable double wall design, Machined sidewalls and made to accept Presta type valves. Laced together with 28 high-quality stainless-steel spokes with brass nipples. ###section###

Pre-Built 18 BMX rear cassette wheel from United. This is the same wheel which can be found on Uniteds 2015 18 Supreme bike. The wheel uses a 28 hole supreme sealed cassette with 14mm male axle and is laced into a wide profile single wall alloy rim. ###section### Product Specs WHEEL SIZE:18" HUB:Sealed 9t Cassette Hub AXLE:10mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Single Wall SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC

36 hole complete front wheel with a 36mm double walled rim paired with a low flanged hub with a 3/8" female axle and sealed bearings. ###section### Product Specs WHEEL SIZE: 20" HUB: Sealed AXLE: 3/8" Female RIM: Double wall SPOKES: TBC NIPPLES: TBC WEIGHT: TBC

Locks front wheel, rear wheel, seat post, 1 PIT key, code card ATTENTION !!! Repeat or replacement ordersof coded parts are only possible with the code number (on the code card) !!! To the installation guide When installing the seat post security, please make sure that the outer pressure surfaces of the saddle clamp are both plane and parallel. If this is not the case, it is possible to order one of our saddle clamps. To the Pitlock saddle clamps Our sets commonly contain*standardwidths: - Front wheel 119 mm installation width - Rear wheel 155 mm installation width - Seat post 33 mm installation width The following special widths are available: - Front wheel 130 mm installation …

Haro's Baseline Cassette Wheel is a solid option for upgrading the front end with something a little more reliable. The double-wall Baseline rim is built to be tough and reliable with straight gauge spokes lacing it to a fully sealed, CNC-machined Baseline Cassette hub that features 5 sealed bearings with 72 points of engagement for a smooth roll and that unique cassette noise. The rim measures in at 38mm wide by 16mm high with a 10mm chromoly axle through the middle to finish. ###section### Product Specs WHEEL SIZE: 20" HUB: 14mm Sealed Cassette AXLE: 14mm DRIVE SIDE: Right Hand Side RIM: Aluminium Rim With Double-Wall SPOKES: 14 Gauge Stainless Steel NIPPLES: Steel

The ZX 333 front wheel is Cinema's most affordable wheel. Featuring the double wall pin joint 333 rim, laced 3 cross to a fully sealed hub with a 3/8” female axle. Comes with a Cinema rim strip and Cinema nylon hub guards. ###section### Product Specs WHEEL SIZE: 20" HUB:  AXLE: Sealed Cinema Hub RIM: Cinema 333 SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 907g

Haro's Baseline Freecoaster Wheel is a solid option for upgrading the front end with something a little more reliable. The double-wall Baseline rim is built to be tough and reliable with straight gauge spokes lacing it to a fully sealed, CNC-machined Baseline Freecoaster hub that features 5 sealed and one angular bearing for a smooth roll. The rim measures in at 38mm wide by 16mm high with a 10mm chromoly axle through the middle to finish. ###section### Product Specs WHEEL SIZE: 20" HUB: 14mm Sealed Freecoaster AXLE: 14mm DRIVE SIDE: Right Hand Side RIM: Aluminium Rim With Double-Wall SPOKES: 14 Gauge Stainless Steel NIPPLES: Steel WEIGHT: TBC