Bike Wheels

If you are looking to remove that Sun Tour freewheel on your vintage ride, you're looking at the right tool. The Park Tool Freewheel Remover for Sun Tour 2 Notch is constructed of heat-treated tool steel for maximum durability and the 1-inch base has flats to fit in a wrench or vise. The thin wall construction lets the tool easily fit between axle cones and locknuts so you don't have to remove them for backing off the freewheel.

Maybe you just picked up a sweet vintage bike at the swap meet or you're looking to restore an old beauty, you always need the right tool for the job. The Park Tool Freewheel Remover for Sun Tour 4 Notch since 1986 features heat treated tool steel and a 1-inch base to fit a wrench or vise. Thin wall construction allows you to remove the freewheel without touching the cones or locknuts. The 4 notches measure approximately 24mm across and fit all Sun Tour freewheels since Reagan has been in office.

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. SPECS: - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

The Cannondale Tool-Less Training Wheels are available for 12'', 16’’, and 20’’ Cannondale kids bikes. FEATURES: - Comes with everything you need for a simple installation - No tools required for install

Achieve balanced spoke tension of your Campagnolo Wheelset with the Park Tool Spoke Wrench for Campagnolo Wheel Systems SW-11. This spoke wrench is precision-machined and plated for durability, then vinyl-dipped for adeptness in hand. It's compatible with both 5. 5 and 6-millimeter spoke hex nipples found on common Campagnolo Wheels.

When it's time to adjust the spoke tension of your Shimano wheels, reach for the Park Tool SW-14. 5 Spoke Wrench for Shimano Wheel Systems. This spoke wrench features a double-sided design that fits both 4. 4 and 3. 75-millimeter spoke nipples of Shimano Wheels. It's precision-machined and plated for durability, then dipped in vinyl for grip and dexterity in hand.

Make quick work of removing four-notch freewheels from flip-flop BMX hubs with the Park Tool Freewheel Remover: BMX freewheels with 30x1mm threads. Made from heat-treated alloy tool steel, this remover has a one-inch base to fit your wrench or bench vise, and uses a thin wall construction to get the job done without the removal of cones or locknuts. This particular remover has four notches approximately 25mm across measured inside to inside.

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims

After a hard season of training and racing, your Mavic wheels will need some love. Place your wheels in a truing stand and grab the Park Tool SW-12 Mavic Spoke Wrench to keep them spinning true and tensioned. The smaller end, with seven splines and a 6. 5mm diameter, will fit Mavics R-sys wheels. On the opposite end, the six spline, 9mm wrench, will fit Mavic Fore equipped wheels (most tubeless mountain bike rims, its equivalent to the Mavic M40630 wrench). Steel construction and precise manufacturing ensure positive purchase so you won't strip soft aluminum nipples. The Park Blue vinyl-dipped handle provides comfort as you work your way around the wheel. As with all Park Tools, the Mavic Spoke …

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA Fits: Specialized 2005 (Late) FSR XC Specialized 2005 (Late) Hardrock Aggro Specialized 2005 (Late) Hardrock XC Specialized 2005 (Late) Hotrock A1 FSR Specialized …

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA Use the Wheels Mfg Fit Finder tool to find the right derailleur hanger for your bike.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA Fits these models, and possibly others: - Airborne Delta CX - Airborne Goblin - GT 2006 Avalanche 1.0, Expert, Pro - GT 2006 I Drive 1.0, 2.0 - GT …

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA Use the Wheels Mfg Fit Finder tool to find the right derailleur hanger for your bike.

ABEC-3 Sealed Bearing FEATURES: - OD: 37mm / ID: 24mm / Width: 7mm - Sealed with LLB type silicone seals - Includes 2 bearings SPECS: - Thickness: 7mm - Bearing O.D: 37mm - Bearing I.D: 24mm - Manufacturer Number: SB-24X37

We utilize the Tacx Skyliner Blue Front Wheel Support to enhance the stability of our bike trainer setup. It's universally compatible to function with road, mountain, gravel, and fitness bikes and it promotes a natural cycling position.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA Use the Wheels Mfg Fit Finder tool to find the right derailleur hanger for your bike.

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims