Car Amplifiers

Connectivity: This amplifier can accept low- or speaker-level inputs so it'll work in almost any system, and the package includes screw-on RCA-to-bare wire adapters for the speaker-level signal. JBL has also included their electrical anti-rotational locking (E.A.R.L.) ground terminal, for a more conductive and secure ground connection for the amplifier. The Stadium 600 sub amp will integrate perfectly and look fantastic in a system that uses the matching JBL Stadium 4 four-channel full-range amplifier.
Mono subwoofer amplifier: 380 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Variable low-pass filter (32-320 Hz, 12 dB/octave) / Variable bass boost (0-9 dB at 70 Hz) / Phase switch …

Features: 5-channel car amplifier, 50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms, 75 watts RMS x 4 + 400 watts RMS x 1 at 2 ohms, 140 watts RMS x 2 bridged at 4 ohms + 400 watts RMS x 1 at 2 ohms, Variable high-pass filter (80-1,000 Hz, 12 dB/octave) on front and rear channels, Variable low-pass filter (50-250 Hz, 12 dB/octave) on all channels, Variable bass boost (0-12 dB at 45 Hz) and subsonic filter (20-50 Hz, 12 dB/octave) on sub channel, Preamp inputs with signal-sensing auto turn-on, Wire

Subwoofer Amplifier With Patented AccuBASS/ 2 Balanced Preamp Inputs/ 10 Hz - 30 kHz Frequency Response/ 102 dBa, Ref 850 W @ 4 Ohm Singal To Noise/ Black Finish

300 watts @ 2 ohms

Customize your bass from the comfort of your front seat.

Kicker CXA4001 400 Watt Mono Class D Subwoofer Amplifier

The Kicker CXA18001 is a powerful and reliable monoblock amplifier that is perfect for anyone looking to take their car audio system to the next level. With a maximum power output of 1800 watts RMS at 2 ohms, this amplifier is capable of driving even the most demanding subwoofers with ease.

Your Everywhere Audio Experience Features IP67/IP66 Certified Waterproof & Dustproof RMS 50W x4 (4?) RMS 75W x4 (2?) Speaker Level Input Signal Sensing Turn-on Variable High & Low Pass Filter Waterproof & Dustproof IPX7/IPX6/IP6X certified. The amplifier can be submerged in up to 3.3 feet of water for 30 minutes, and can resist high-pressure, heavy sprays of water. Salt Spray Proof ASTM B117 salt spray (or salt fog) corrosion testing ensures the amplifier will not corrode or fail in saltwater and other harsh environments. Vibration Proof Thick 1/4" die-cast frame suppresses vibration. Increased Power Flow Metal studs enable high current flow for connections between the amplifier and battery,…

SOLD AS EACH

750 Watts RMS Power Handling/ Single Cycle Control/ R.I.P.S. System/ Studio-Grade Signal Processing/ Differential-Balanced Inputs/ Advanced Rollback Protection And RealSink/ Brushed Aluminum Finish

Maximum Power Output - Class D amplifiers can deliver high power output, and the GM-DX871 is no exception with its maximum power output of 1,600 watts. This powerful amplification allows for dynamic and impactful sound reproduction.
Class D Amplification - These are known for high efficiency, converting a higher percentage of input power into output power compared to other amplifier classes. This efficiency results in less power wastage and reduced heat generation.
Compact Design - Class D amplifiers are generally more compact in size compared to other amplifier classes. The compact design of the GM-DX871 makes it easier to install in various vehicles with limited space and without taking …

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
Detachable sliding terminal cover offers a sleek design and easier installation.
All terminals and connections are on one side for easier installation and a cleaner look.
Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.…

Bringing innovation and technology to the automotive sound market, PRV Audio's EX4.6 PRO electronic crossover, makes it easy to customize your sound with a wide variety of frequency and filter adjustments. Featuring 4-way adjustable high and low pass filters and also output level control on each channel, plus an adjustable bass boost option on the Sub Out channel. The EX4.6 PRO is ideal for perfecting your audio system.

Built-in DSP

The DS18 CANDY line of Cass D Amplifiers are compact and powerful. DS18 CANDY will make your ears tingle with pleasure.

Configurable As 5 Or 3 Channel Amplifier/ 4 x 200 Watts + 1 x 500 Watts @ 2 ohms/ 4 x 100 Watts + 1 x 300 Watts @ 4 ohms/ 20 Hz - 22 kHz Frequency Response/ 6 Balanced Preamp/Speaker Level Inputs/ AccuBASS Processing/ 3-Way Independent Linkwitz-Riley Alignment Crossovers/ GTO Signal Sense/ PFM Subsonic Filter/ Black Finish

100W x 4 + 300W x 1 @ 4 ohms/ 200W x 4 + 500W x 1 @ 2 ohms/ 400W @ 4 ohms Bridged/ 20 Hz - 22 kHz Frequency Response/ 6 Balanced Preamp/Speaker Level Inputs/ AccuBASS Processing/ Linkwitz-Riley Crossovers/ GTO Signal Sense/ Black Finish

1 x 300 Watts @ 2 ohms/ 1 x 175 Watts @ 4 ohms/ AccuBASS Bass Management/ 26 Hz - 22 kHz Frequency Response/ 2 Preamp/Speaker Level Inputs/ GTO Signal Sense/ IPX6 Rated/ Black Finish

Subwoofer Amplifier With Patented AccuBASS/ 2 Balanced Preamp Inputs/ 10 Hz - 30 kHz Frequency Response/ 102 dBa, Ref 500 W @ 4 Ohm Singal To Noise/ Black Finish

Built-In DSP/ Configurable As 6/5/4/3 Channel Amplifier/ AccuBASS Processing/ 6 balanced Preamp Inputs/ 8 Speaker Level Inputs/ 2 Preamp Outputs/ 20 Hz - 24 kHz Frequency Response/ 102 dBA, Ref 200 W @ 2 Ohm Signal To Noise/ Black Finish