Camera Batteries for cameras

The Blackmagic Design Power Supply for DaVinci Control Surfaces and ATEM Switchers (12 V/70 W) is a replacement or backup power supply for the following products: ATEM 1 M/E Production Switcher, ATEM 2 M/E Production Switcher, ATEM 1 M/E Broadcast Panel and DaVinci Resolve Control Surface.

Elevate Your Power Game: The Ultimate 4-Way Power Supply!Harness Quadruple PowerEver felt the need for a power solution that doesn't tie you down to just one device? Welcome to the 12V 4-Way Power Supply from IndiPRO Tools. Designed for those who are passionate about their gadgets, this power hub comes equipped with not one, not two, but four D-Tap outputs! Whether you're looking to power up a single device with 10A of raw energy or spread it across multiple gizmos, this power supply has got you covered.Modern Plug, Traditional TrustNo more fumbling around for adapters or worrying about plug compatibility on international trips. Our 3-prong US AC plug ensures that wherever you are in the States,…

Use your 8-pin Fujinon zoom control on 8-pin Canon lenses with this convenient, affordable converter cable.

Case Relay Camera Power System (CPS) lets you power your camera continually with an external battery pack or wall power, providing peace of mind knowing you have an uninterrupted power source for your camera. Requires Relay Camera Coupler sold separately. • More cost effective than purchasing multiple proprietary camera batteries • Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets. • Never need to charge camera batteries again. And never run out power. • Compatible with most Canon, Nikon, Sony, Panasonic, Fuji and Olympus cameras. Check to confirm your camera model is supported. • A Relay Camera Coupler …

Power your camera rig and accessories with the Ikan V-Mount Battery Plate by using the included D-tap power cable. Featuring multiple types of power outputs including four D-Tap outputs and one 5V USB output, this unit provides effective power distribution with a variety of output voltages and amperages. Four D-Tap outputs provide power output to different rig components, while a USB output is available for charging your mobile or wireless device. A barrel jack power input can charge the battery while tethered. Using the integrated 15mm LWS rod clamp, this battery plate can be mounted onto the rear of a shoulder rig.Having the device in this configuration allows you to use it and the battery …

The QRC-BM URSA Gold Mount installs quickly on the Blackmagic Design URSA camera. It will specifically handle the URSA's 12V input power requirement and has a single PowerTap located on the toggle switch side. For use with Anton/Bauer DIGITAL and Logic Series batteries.

The Canon ACK-E18 AC Adapter Kit enables the EOS Rebel T6s and EOS Rebel T6i to draw power directly from an AC power source. It is designed to supply uninterrupted power for your camera. Kit includes the AC adapter, DC coupler and power cord.

The MB-N10 is a Multi Battery Power Pack from Nikon that can accept two EN-EL15b or EN-EL15a/EN-EL15 rechargeable Lithium-ion batteries each housed in its own battery compartment. This system is intended for the Z 7 and Z 6 full frame mirrorless cameras (cameras sold separately). It is designed to add additional shooting time versus just using the battery in the camera alone. The MB-N10 may increase the length of shooting time up to 1.8x* (*CIPA standard) more than using just the camera’s battery.For convenience, the batteries in the MB-N10 are hot-swappable, which means that you can replace one while the other continues powering the camera. This is beneficial for video, interval and time-lapse …

Battery grip D-BG6 for the PENTAX K-1: Exclusively designed for the PENTAX K-1, this optional battery grip accepts six AA-size batteries as well as the standard lithium-ion rechargeable battery. It provides an extra set of shutter-release, AE-lock, AF, ISO, exposure-compensation and green buttons, as well as a preview lever and dual electronic dials to facilitate vertical-position shooting. It features the same dustproof, weather-resistant construction as the K-1 body. • For K-1 DSLR Camera • Holds 1 D-LI90P or 6 AA Batteries • Extended Grip for Vertical Composition • Shutter Release Button for Vertical Use • On/Off Switch, Command Dials • Weather- and Dust-Resistant…

What sets the Blackmagic Pocket Camera Battery Pro Grip apart is its ability to transform the Blackmagic Pocket Cinema Camera 6K Pro into a powerhouse for extended shooting sessions. This essential accessory not only extends your shooting time to over three hours with a single charge but also enhances the ergonomic handling of your camera.Crafted with a sleek carbon fiber design, this durable and sturdy grip is engineered to withstand the rigors of on-location filming and frequent use. The non-slip hand grips provide a secure and comfortable hold, ensuring steady shots and reducing fatigue during long days on set.The Battery Pro Grip is specifically designed for seamless integration with the …

15V Power Supply for RED Weapon, Scarlet Weapon, Raven, Epic and Scarlet cameras. Plugs into the 1B LEMO Power input on the camera and provides up to 10A. Includes U.S power cable and can accept 120V / 240V A/C input.

The SO-XLR adapts any Gold Mount to accept a standard 4 pin XLR connector. 3 Stud Anton Bauer, 4-Pin XLR. This plate mounts directly to the Gold Mount. Voltage: 12-14.4 VDC.

The Nikon MB-D14 is equipped with a shutter-release button, AAE/AF lock button, multi selector, and main- and sub-command dials for improved operation when taking photographs with the camera vertically oriented. The MB-D14 Multi-Power Battery Pack can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium), or EN-EL 15 rechargeable Li-ion batteries. To use the MB-D14 with AA batteries, use the MS-D14 AA Battery Holder. When using EN-EL15 batteries to power the MB-D14, use the MS-D14EN Battery Holder.

The Nikon MB-D16 Multi Battery Power Pack can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium) or EN-EL15 rechargeable Li-ion batteries. To use the MB-D16 with AA batteries, use the MS-D16 AA Battery Holder. When using EN-EL15 batteries to power the MB-D16, use the MS-D16EN Battery Holder. The MB-D16 is equipped with a shutter-release button, AE/AF lock button, multi selector and main- and sub-command dials for improved operation when taking photographs in portrait (tall) orientation.

Anton/Bauer Wedge Mount Adapters instantly convert the Sony "wedge" connector, providing compatibility with all Gold Mount batteries. Although all Sony cameras feature a PowerTap connector, lighting is limited to either 25 or 50 watts (depending on model) due to current limiter in the camera. The wedge mount adapters allow the unrestricted use of on-camera lighting with the integral PowerTap connector, as well as access to the InterActive viewfinder Fuel Gauge and Automatique feature standard in all Sony camcorders. QR-DSR mounts instantly to the DSR series and DVCAM camcorders to adapt Anton/Bauer batteries. QR-A200 adapts the wedge mount on Sony DNW-A25/A220/A225/DS70 portable SX editing …

The Leica Lithium-ion Battery Pack is designed for the Leica M10 digital rangefinder camera.

If you're a professional photographer or a passionate hobbyist using a Leica M11 camera, the BP-SCL7 Lithium-Ion Battery Pack is an essential accessory to ensure uninterrupted shooting sessions. This high-quality, durable battery pack is specifically engineered for compatibility with Leica M11, Leica M11 Monochrome, and Leica M11-P cameras, promising optimal performance and reliability.The BP-SCL7 Lithium-Ion Battery Pack is not just another battery; it's an innovative power solution that offers long-lasting power, making it a reliable choice for photographers who need to capture moments without worrying about recharging their camera's battery. Its compact design makes it easy to carry, ensuring …

Experience the power and reliability of the BP-SCL6 8.4V 2200mAh Lithium-Ion Battery, specifically designed for the Leica Q3. This high-capacity, rechargeable battery is not only compatible with the Leica Q3 but also seamlessly integrates with the Leica Q2, Leica SL2, and SL2-S models. The BP-SCL6 8.4V 2200mAh Lithium-Ion Battery offers continuous monitoring of crucial battery data, ensuring safe and comfortable operation for your photography sessions. This feature ensures that your camera is always ready to capture those perfect moments, without the worry of sudden power loss. Constructed with Lithium-Ion technology, the BP-SCL6 8.4V 2200mAh battery provides long-lasting power, durability, …

Make your photography experience more versatile with the high-quality DR-5 Right Angle Screw-In Viewfinder. This compact and durable accessory is designed to attach seamlessly to the finder of Nikon 35mm SLR Cameras, enhancing your ability to capture the perfect shot from unique angles. The DR-5 Right Angle Viewfinder is equipped with a built-in roof prism, allowing you to view your image at right angles to the camera's optical axis. This feature is particularly useful when shooting from low or high viewpoints, or when normal finder viewing is challenging, such as in close-up work or photomicrography. With the DR-5, you have the flexibility to set the reproduction ratio to either 1:1 or 1:2,…

The VG-C1EM from Sony allows you to enjoy long hours of comfortable operation in the vertical orientation with this sure vertical grip. Designed for use with Alpha a7 Series cameras, it features dust and moisture protection and can hold two batteries for longer shooting.FeaturesFirm holding and control when shooting verticallyTotal of two NP-FW50 for enhanced power supplyDust and moisture resistant designAuto switching powerSpecificationsColor: BlackDimensions (Approx.)(WxHxD): 5-1/8" x 2" x 2-1/8" (130 x101 x 53mm)Weight (Approx.): 8.9oz (250g) Sony VGC1EM Vertical Grip for Alpha a7, a7R and a7s.

The SBCX-1 bundles the BLX-1 Lithium-Ion Rechargeable Battery and the BCX-1 Battery Charger, compatible with the OM-1.The BLX-1 Lithium-Ion Rechargeable Battery is a high-capacity, 2,280 mAh lithium-ion battery. It can be recharged approximately 500 times. This battery is compatible with the OM-1 and HLD-10 Power Battery Holder.The BCX-1 is the dedicated charger can simultaneously charge two BLX-1 Lithium-Ion Rechargeable Batteries. Batteries are fully charged in approximately 150 minutes.

The V-Mount Battery Cheese Plate from SHAPE features a cheese plate and a V-mount battery plate to power your Panasonic AU-EVA1, Sony FS7, or FS5 cameras. The cheese plate is designed with a 15 mm Rod Bloc system with one ratchet knob for quickly fixing the plate to your camera rig. The included 22" regulated D-Tap cable can connect to the ALEXA Mini's power input.The 22" 12V D-Tap Power Converter from SHAPE enables you to power your Panasonic AU-EVA1, Sony FS7 or FS5 Camera using a 12 to 18V battery with a D-Tap connector. It converts the 12 to 18 volts to regulated 12V with a 3-amp rated draw, providing a safety margin for your camera.

Specifically designed for Canon's EOS R camera, this large capacity battery grip is powered by two Battery Pack LP-E6N/LP-E6 batteries. It features a variety of operating controls, and is ideal for high volume and vertical shooting. Canon 3086C002 BG-E22 Battery Grip for EOS R Camera.

Where professional videography meets extended battery life, the Blackmagic Pocket Battery Grip emerges as a game-changer. Specifically designed for the Blackmagic Pocket Cinema Camera 4K, this battery grip not only enhances the camera's power capacity but also its ergonomic design. The Blackmagic Pocket Battery Grip boasts a slide-out tray, engineered to securely hold two L-series batteries. This feature enables users to power external flash disks or enjoy over 2 hours of continuous recording time before needing to recharge. This makes it an ideal solution for those engaging in extended shooting sessions. The Pocket Camera Battery Grip allows users to swap the standard LP-E6 battery of the camera …