Wire Detectors Zircon

NEW! – Target Control (TC) Mode locates the center, edges, and direction of wood studs, and not metal, up to ¾ in. (19 mm) deep behind surfaces. Identifies ‘safe-to-drill’ zones between adjacent drywall screws, nails, or protector plates
StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep
DeepScan Mode doubles the scan depth of wood and metal studs up to 1½ in. (38 mm) deep
MetalliWarning Indicator turns on when metal objects are detected in all modes
ColorTrip Display illuminates pale blue in TC mode, green in DeepScan mode, and red to alert the presence of live AC electricity

Locates the edges of wood or metal studs up to 3/4-Inch (19 mm) deep
Easy-to-read LED display and audio tone indicates stud edges
Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location
Comes with assorted hooks rated from 10-Pound to 75-Pound capacity

Locates the edges of wood or metal studs up to 3/4-Inch (19mm) deep
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51mm) deep
Updated SpotLite Pointer shines an arrow-shaped light on the wall to mark the target
All-new Patent-Pending Pinch Grip Design
Patented TruCal technology indicates when the tool is calibrated and ready

MultiScanner i520 One Step quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, Spot Lite Pointing System and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe)
Shows the depth of metal from the surface in both inches and centimeters
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more

LCD display screen

Finds studs electronically to 1-1/2" deep through walls, ceilings, and most bare wood flooring
Stud and joist locator with sound and "DeepScan" mode
"TruCal" instant calibration ensures accuracy
Audio signal and LEDs indicate stud edges
Flashing LEDs indicate calibration error

Mpn: 66253
Country of manufacture: China
Manufacturer: Zircon

The Zircon StudSensor Edge stud finder finds the edges of wood and metal studs behind walls. The easy-to-read display and patented SpotLite Pointer System clearly identify the edge of the target. The patented pivot pinch grip design allows for a comfortable, secure hold in either hand, at any angle.