Printer Parts

Specification Internal: 10 x 11mm/0.39inch x 0.43inch(H*W); External: 14.6 x 17mm/0.57inch x 0.67inch(H*W)Total Length: 1Meter/39.4inch; Material: Nylon PA66 Extra Extra one pair connector, can split the integral drag chain into 2 pieces to use; Extra 12pcs screws, easy to fix the chain; Extra Screwdriver, freely disassemble to change the length of the chain and open the side cover of it. Multi-Applications The black plastic drag chain cable carrier is suitable for the occasions of reciprocating

Big Plastic Pulley Wheel with Bearing Idler Pulley Gear Perlin Wheel for 3D Prin

Sponsored by eBay

Package Include: 3D Printer Parts ( 4Pcs Ender 3 Metal Leveling Nuts and 4Pcs Silicone Solid Bed Mounts Heatbed Leveling Kit Suitable for 3D Printer heated bed, compatible with Ender 3/ Ender 3 pro/Ender 3 X, Ender 5/ Ender 5 plus/ Ender 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S pro,CR-10 plus, CR-X, CR 20 etc. 4pcs Hand twist leveling nut: Made of aluminium alloy, no worry it gets rusty, and easy to use, strong scalability, durable, not easily deformed, easy to instal

Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use. Besides, it can also be cleaned by Anycubic Wash and Cure Machine or ultrasonic cleaning. Anycubic UV resin prints the models with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that every model is printed in good details. An

Suit for most kinds of 3D printers, widely used in guide rails, electrical insulation at various frequencies. Gas and liquid conveying tubing, lining tubing, heat exchanger tubing, use in machinery, electronics, valves, etc. Fit for 1.75mm filament; Package Content: 1 x 3D Printer Tube. It is rigid enough to maintain a nice arc from the extruder to the hot end. Length: 8 Meter / 26.25 Feet; Inner Diameter (ID): 2mm; Outer Diameter (OD): 4mm. PTFE Tubing has a low coefficient of friction with a n

EASY REMOVALContains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints. EXCELLENT ADHESIONPEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120,which could meet 99% filament material needs. WIDE APPLICATIONCompatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ En

Application: This hotend replacement is ONLY compatible with ANYCUBIC Vyper and Kobra Max 3d printer.It will NOT work with Kobra Neo or Kobra Go. Volcano Hotend Design: The print head heats evenly because of the special Volcano hotend nozzle design ,filament flows smoothly in throat nozzle ,and it supports high speed printing. Plug and Play: Both of the thermistor and heating rod come with connector, no wiring and peeling works.So this V5 J-head hotend will be quite easy to install on ANYCUBIC V

Rated up to 300deg C Designed for use in E3D V6 Hotend Compatible with the Prusa 3D printers Made from brass; an optimal material for everyday printing

Thermistor Color: white,Cartridge Heater Material: 304 Stainless Steel Temperature sensor 100K accuracy of ± 1% Voltage: 24v, Power: 40w,Diameter: 6mm ; Length: 20mm Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring Compatible with Creality Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.