Jigsaw Blades

The Lenox Hack Saw Blades are bi-metal and have a spring steel body and a high speed steel cutting edge. This construction allows the blades to bend and flex without shattering and the high speed steel gives you a superior cutting edge for long life.

Ace Keyhole Saw Blades, includes two blades. Metal cutting blades used on thin sections of solid and tubular stock 1/8 inch to 1/4 inch. Wood cutting blade for use on wood, plastic and wallboard.

The Ace 6-1/2 in. Medium 20 Tooth Coping Saw Blades are ideal for precise sawing of wood, plastic, copper and other soft metals.

The Ace six-piece coping saw blade set assorted includes two fine, two medium and two coarse 6-1/2 in. blades made from high carbon steel for strength and durability. This set fits Ace and other popular coping saws.

"5 inch pin end hobby blades measure 5 inch between pins and are available with regular teeth. They are used on Sears Craftsman, Penn State, Delta, Ryobi and all 15 "" and 16 "" imported scroll saws to cut wood, plastic and thin mild metals and provide a medium smooth finish."

"5 inch pin end hobby blades measure 5 inch between pins and are available with regular teeth. They are used on Sears Craftsman, Penn State, Delta, Ryobi and all 15 "" and 16 "" imported scroll saws to cut wood, plastic and thin mild metals and provide a medium smooth finish."

The Disston carbide grit hacksaw is manufactured to cut through the toughest materials including fiberglass, tile and cast iron. Carbide grit offers the greatest wear and heat resistance. Cuts on both the down and up stroke.

The Disston carbide grit rod saw is manufactured to cut through the toughest materials including fiberglass, tile and cast iron. Carbide grit offers the greatest wear and heat resistance. Cuts on both the down and up stroke. Ideal for cutting in tight area and hard to reach places.

The Ace 4 Piece Coping Saw Blade Set - Coarse includes four coarse 6.5 inch blades made from high carbon steel for strength and durability. This set fits Ace and other popular coping saws.

3 inch pin end hobby blades measure 2-3/4 inch between pins and are available with regular or skip teeth. They are used on dremel motosaw-(the older models), sears craftsman hobby scroll saw, delta 15 inch hobby scroll saw and emco lux hobby saw to cut wood, plastic and thin mild metals and provide a medium smooth finish.

The Ace 6-1/2 In. Fine 28 Tooth Coping Saw Blades is ideal for precise sawing of wood, plastic, copper and other soft metals.

3 inch pin end hobby blades measure 2-3/4 inch between pins and are available with regular or skip teeth. They are used on dremel motosaw-(the older models), sears craftsman hobby scroll saw, delta 18.5 inch hobby scroll saw and emco lux hobby saw to cut wood, plastic and thin mild metals and provide a medium smooth finish.

RemGrit carbide grit jig saw blades cut extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back high heat and abrasion resistance, no teeth to dull or chip, resists snagging, smooth cutting and greater wear resistance.

RemGrit carbide grit jig saw blades cut extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back high heat and abrasion resistance, no teeth to dull or chip, resists snagging, smooth cutting and greater wear resistance.

"5 inch pin end hobby blades measure 5 inch between pins and are available with regular teeth. They are used on Sears Craftsman, Penn State, Delta, Ryobi and all 15 "" and 16 "" imported scroll saws to cut wood, plastic and thin mild metals and provide a medium smooth finish."

"5 inch pin end hobby blades measure 5 inch between pins and are available with skip teeth. They are used on Sears Craftsman, Penn State, Delta, Ryobi and all 15 "" and 16 "" imported scroll saws to cut wood, plastic and thin mild metals and provide a medium smooth finish."

RemGrit Carbide Grit Jig Saw Blades cut extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance; no teeth to dull or chip; resists snagging; smooth cutting; greater wear resistance.

"Cuts on both push and pull strokes. Fits all standard 12"" hacksaw frames"

RemGrit® Carbide Grit Rod Saw Blades have carbide particles bonded to an alloy steel rod. This saw cuts extremely abrasive materials with no teeth to chip or dull. Carbide grit offers the greatest wear and heat resistance. Ideal for materials that other saws will not cut. Rod design gets into tight areas and cuts on both strokes. Fits any standard hacksaw frame.

The Disston carbide grit hacksaw is manufactured to cut through the toughest materials including fiberglass, tile and cast iron. Carbide grit offers the greatest wear and heat resistance. Cuts on both the down and up stroke.

This DeWalt 2-pack 10 in. Bi-Metal Hacksaw Blade is ideal for cutting. The blades cut most metal including unhardened tool steel and stainless steel. The Bi-Metal construction combines flexibility from carbon steel and cutting performance from high speed metal.

IRWIN jigsaw blades for cutting wood feature precision-ground teeth for fast, smooth cutting in hard and softwood, plastics, laminate particle board, and plywood

IRWIN jigsaw blades for cutting wood feature precision-ground teeth for fast, smooth cutting in hard and softwood, plastics, laminate particle board, and plywood

One of the most popular Bosch wood cutting blades for all-around use. Produces clean, fast cuts in wood and wood byproducts. Efficient and economical for professional or DIY users. T-shank design for maximum grip and stability which fits 90 percent of all current jig saw makes and models.