Antennas for Routers

For extra network coverage (up to 3-4km in the line of sight), we suggest adding an external 8dBi Omni antenna - the TOF-2400-8V-4.If necessary, this antenna can be used for any 2.4 GHz device. Not only it works with the 2.4 GHz LoRa connectivity, it also supports the regular 2.4 GHz WLAN. It comes with a 1m long SMA cable and a mechanical holder for quick and easy mast attachment – when you need that extra network coverage. Compact size and increased durability without sacrificing the power – this antenna will get the job done.

The SXT R also known as RBSXTR is an integrated low-cost 10.5dBi LTE antenna without LTE modem (free miniPCI-e slot) The SXT R is a device for remote locations that are within cellular network coverage Due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device It also includes a 24 V power supply, but can support full range of 12-57 V and 18-57 V with PoE-Out and is 802.3af/at compliant

The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability. Sleeve30 shell is made of corrosion resistive, lightweight aluminum. front cover has excellent RF signal transparency. Additional and co-channel interference creates unwanted signal attenuation that causes decrease of link quality and speed. Using Sleeve30 Kit with mANT30 gives 22dB additional selectivity for each mANT30 in a critical direction

RBSXTG-5HPacD-SA US Version (SXT SA5 ac) is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before

GrooveA-52HPn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. The GrooveA-52HPn has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power! GrooveA has also supports AP mode. The GrooveA-52HPn has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in Powered by the RB921 device, the mANTBox comes ready to use with everything included The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1

Mikrotik mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The Mikrotik mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Mikrotik powered by the RB911 device, the mANTBox comes ready to use with everything included. The Mikrotik device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power. Mikrotik mANTBox 2 12s: 2.4GHz 120 degree 12dBi dual polarization sector Integrated antenna with 600Mhz CPU, 64MB RAM, Gigabit Ethernet, PSU and PoE.

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190 degrees With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s You can use the quickMOUNT extra with any pole mountable device with weight less than 8 Kg Supports mANT, SXT, Omnitik, BaseBox, DynaDish or any other pole mountable device

The QRT 5 (RB911G-5HPnD-QRT) is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. The QRT 5 has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, QRT is ideal for point to point links

The QRT 5 (RB911G-5HPnD-QRT) is a rugged outdoor flat panel antenna, with a built in RouterBOARD The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter The QRT 5 has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless Easy to use and quick to deploy, QRT is ideal for point to point links

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless. Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. QRT 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Inside is the high power RB911G-5HPacD dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter CPU nominal frequency: 720 MHz / License level: 4 / Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless. Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds.

Mikrotik DISC Lite5 5GHz RBDisc-5nD-US 21dBi with Integrated Antenna OSL3 CPE PtP PoE DISC Lite5 ac is equipped with 21 dBi dual chain antenna, 802.11a/n/ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port and RouterOS Level 3 license. The device comes complete with a power supply, PoE injector and mounting kit. The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links The DISC Lite5 ac is also compatible with our SXT mounting systems, including the quickMOUNT pro series. DISC Lite5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. Operating System: RouterOS

nRayAIM-DH1 is an alignment and aiming attachment for the nRAY (Wireless Wire nRAY) Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY

10129

MikroTik MTRADC Radome Cover Kit for mANT30 30dBi (4-Pack) Mikrotik Radome Cover Kit is now available for our mANT 30dBi parabolic antennas Wind Load (125 mph): 50 kg at 40 m/s, 28 kg at 30 m/s

Ideal for Mikrotik mANT 30dBi (mANT30 and mANT30 PA) parabolic antennas Reduces wind load, protects reflector surfaces from harsh environment Protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life It's made from a special material that has a low dielectric constant Wide range of temperature and direct sunlight won't affect it

Mikrotik mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The Mikrotik mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Mikrotik powered by the RB911 device, the mANTBox comes ready to use with everything included. The Mikrotik device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power. Mikrotik mANTBox 2 12s: 2.4GHz 120 degree 12dBi dual polarization sector Integrated antenna with 600Mhz CPU, 64MB RAM, Gigabit Ethernet, PSU and PoE.

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in Powered by the RB921 device, the mANTBox comes ready to use with everything included The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1

Mikrotik mANTBox 19s Built-in 5GHz 802.11a/n/ac 19dBi MIMO Sector Antenna OSL4 (RB921GS-5HPacD-19S-US) The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1