Antennas for Routers

The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit
The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides
The SXTsq 5 ac retains a 16 dBi antenna. The antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner
Dimensions: 129 x 129 x 34 mm, Size of RAM: 256 MB, Storage size: 16 MB, PoE in: Passive PoE, PoE in input Voltage: 10-28 V
Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, Antenna gain dBi for 5 GHz: 16, 10/100/1000 Ethernet ports: 1…

The LHG R is an integrated high gain 21dBi LTE antenna WITHOUT LTE modem (free miniPCI-e slot)
If for any reason you don't want to use one of our own LTE modems, you can simply buy the LHG R and install the modem of your choice
Unit is designed, for remote locations that are within cellular network coverage
Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t
Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available

GrooveA-52HPn is a fully featured wireless RouterBOARD powered by RouterOS
Weatherproof, durable and ready to use. The GrooveA-52HPn has one 10/100 Ethernet port with PoE support and a built in wireless radio
It has software selectable 2 or 5GHz wireless mode, and high output power! GrooveA has also supports AP mode
The GrooveA-52HPn has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align
Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz)

The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD.
The device has a 24dBi antenna and a high power 5GHz wireless transmitter.
Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter.
It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless.
Easy to use and quick to deploy, QRT is ideal for point to point links.

The new QM-X adapter enables vertical and horizontal adjustment on the pole
It is lightweight, easy to use, extremely durable and without any small parts that might break
Dimensions 60 x 56 x 35 mm, Material Glass fibre reinforced nylon
Tube diameter 30 mm, Max tube diameter to which, mount can be attached 60 mm
Maximum antenna weight 2 kg, Compatible devices SXTsq series and DISC 5

It’s simple and low cost
Adjustable horizontally and vertically
Wall or pole mountable
With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.
The quickMOUNT is very durable due to it’s special plastic composite material - anvilNITE (TM)

The LHG LTE kit is a device for remote locations that are within cellular network coverage
Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t
Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available
The unit is equipped with one Ethernet port, has a built in high quality Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink
RBLHGR&R11e-LTE includes LTE modem that supports LTE bands 2, 4, 5 and 12, mostly used by mobile operators in United States, Canada and Lati…

The LHG HP5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna.
LHG HP5 comes with two times more output power than our regular LHG 5, and is designed to reach up to 60% longer distances.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
CPU nominal frequency: 600 MHz. Size of RAM: 64 MB. Operating System: RouterOS
LHG HP5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The Dynadish 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, but this new device operates in the licensed 6GHz frequency.
This means less interference than the often saturated 5 GHz frequencies for higher speed and more reach.
By operating above the most popular WiFi frequencies you are now able to build your wireless links from busy towers without suffering problems with noise.
Ideal for long distance point-to-point links: 5.9 - 6.4 GHz dual chain board integrated into a 25 dBi dish antenna
This product is not suitable for unlicensed ISM bands. Device use is subject to country regulations. Availability might be limited depending on distributor stock …

Mikrotik DISC Lite5 US version is an integrated 21dBi Dual Chain 802.11n CPE with a 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed
The Mikrotik RBDisc-5nD-US uses a backfire type antenna which allows to reach 21dBi gain in such a low cost and compact package
The Mikrotik device comes complete with a power supply, PoE injector and mounting kit. The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links
CPU core count: 1. CPU nominal frequency: 600 MHz. Size of RAM: 64 MB. Storage size: 16 MB. PoE in: Passive PoE
PoE in input Voltage: 10-30 V. Wireless 5 GHz standards: 802.11a/n. 10/100 Ethernet ports: 1. Max power consumption: 6 WMikrotik,…

U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)
MikroTik ACSMAUFL U.fl - SMA female pigtail ACSMAUFL
U.fl-SMA female pigtail that can be used to connect your LTE card to an external antenna if you are using wAP R kit there are special openings in the enclosure of the wAP R designed for these pigtails
Connector 1 form factor Straight , Connector 2 form factor Straight Connector contacts plating Gold Connector 1SMA
Color of product Black , Connector gender Female

LiteBeam AC LR LBE-5AC-LR-US 26 dBi 5 GHz airMAX AC Long-Range CPE (5-Pack)
The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.
The LiteBeamAC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
The LiteBeam AC LR provides 26 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.
A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics.

Bulk Packaging
HP 2x698121-001 Wireless
Antenna Cable Kit 697332-001
WPB143-L and WPB143-L Kit
30 day warranty

Use these cables to connect your power mount to a compatible bike system. Choose the appropriate cable by selecting your version.

FEATURES: Measures pedal strokes per minute Easy-to-install wireless sensor uses no magnets Fastens to any size crankarm TECHNOLOGY: Uses Bluetooth® technology to send cadence data to your paired device Your Garmin Connect™ account allows you to track, analyze and share your performance

CATEYE MT400 Bracket/Sensor Kit.
CATEYE MT400 Bracket/Sensor Kit.
70 cm wire length suitable for front wheel use only.

Full Product Specifications: Click to view
Directivity: Omni-directional
Frequency: 2.40 GHz to 2.50 GHz
Antenna Gain: 5 dBi
Connector Type: N-Type

60 Miles Range/ Multi-Directional Reception/ 8K/4K/1080P Ready/ Multi Position/ Modern Fabric Design/ ATSC 3.0 Compatible/ Black Finish

60+ Miles Range/ Multi-Directional Reception/ 8K/4K/1080P Ready/ Signal Level Meter/ "Soundbar " Design Style/ ATSC 3.0 Compatible/ Black Finish

Bike Speed 2 Sensor