Antennas for Routers

RBSXTG-5HPacD-SA US Version (SXT SA5 ac) is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before

GrooveA-52HPn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. The GrooveA-52HPn has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power! GrooveA has also supports AP mode. The GrooveA-52HPn has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in Powered by the RB921 device, the mANTBox comes ready to use with everything included The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1

Mikrotik mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The Mikrotik mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Mikrotik powered by the RB911 device, the mANTBox comes ready to use with everything included. The Mikrotik device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power. Mikrotik mANTBox 2 12s: 2.4GHz 120 degree 12dBi dual polarization sector Integrated antenna with 600Mhz CPU, 64MB RAM, Gigabit Ethernet, PSU and PoE.

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190 degrees With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s You can use the quickMOUNT extra with any pole mountable device with weight less than 8 Kg Supports mANT, SXT, Omnitik, BaseBox, DynaDish or any other pole mountable device

Mikrotik QRT 5 RB911G-5HPnD-QRT-US Outdoor Flat Panel Antenna 24dBi US Version

The QRT 5 (RB911G-5HPnD-QRT) is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. The QRT 5 has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, QRT is ideal for point to point links

The QRT 5 (RB911G-5HPnD-QRT) is a rugged outdoor flat panel antenna, with a built in RouterBOARD The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter The QRT 5 has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless Easy to use and quick to deploy, QRT is ideal for point to point links

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless. Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. QRT 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD The QRT 5 has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless Inside is the high power RB911G-5HPacD dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter CPU nominal frequency: 720 MHz / License level: 4 / Operating System: RouterOS

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless. Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds.

nRayAIM-DH1 is an alignment and aiming attachment for the nRAY (Wireless Wire nRAY) Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY

This NetMetal version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card, a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas The NetMetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards  Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable Basebox wireless device p…

MikroTik MTRADC Radome Cover Kit for mANT30 30dBi (4-Pack) Mikrotik Radome Cover Kit is now available for our mANT 30dBi parabolic antennas Wind Load (125 mph): 50 kg at 40 m/s, 28 kg at 30 m/s

Ideal for Mikrotik mANT 30dBi (mANT30 and mANT30 PA) parabolic antennas Reduces wind load, protects reflector surfaces from harsh environment Protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life It's made from a special material that has a low dielectric constant Wide range of temperature and direct sunlight won't affect it

Mikrotik mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The Mikrotik mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Mikrotik powered by the RB911 device, the mANTBox comes ready to use with everything included. The Mikrotik device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power. Mikrotik mANTBox 2 12s: 2.4GHz 120 degree 12dBi dual polarization sector Integrated antenna with 600Mhz CPU, 64MB RAM, Gigabit Ethernet, PSU and PoE.

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in Powered by the RB921 device, the mANTBox comes ready to use with everything included The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1

Mikrotik mANTBox 19s Built-in 5GHz 802.11a/n/ac 19dBi MIMO Sector Antenna OSL4 (RB921GS-5HPacD-19S-US) The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s comes with 19dBi 120 degree sector antenna Dimensions: 152 x 598 x 78 mm, PoE in: Passive PoE, Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, 10/100/1000 Ethernet ports: 1, SFP ports: 1

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in Powered by the RB921 device, the mANTBox comes ready to use with everything included The mANTBox 19s US uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 19s US comes with 19dBi 120 degree sector antenna. MikroTik RouterOS, Level 4 license RB921GS-5HPacD-19S-US (USA) is factory locked for 5.17 - 5.25 GHz and 5.725 - 5.835 GHz frequencies

The mANTBox US Version is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power mANTBox 15s comes with 15dBi 120 degree sector antenna RB921GS-5HPacD-15S-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed