Other for Irrigation

Faucet drip tee filter, use to filter water before it enters the drip system, attaches directly to standard outdoor faucet 150 mesh removable filter, designed specifically for drip watering system, by removing debris, from the water supply, clogged drippers & spray nozzles are reduced, the mesh filter is easy to remove for cleaning.

Save time installing your drip system with the Adjustable Flow Bubbler Assembly. The bubbler, stake, and inlet come preassembled and ready to install. Connects with the patented Clamp N Pierce connector which snaps the inlet into supply tubing at once. The 8-stream bubbler emits water in a full-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Use the control dial to increase or decrease the output of water to your preference. Bubbler and tubing made of polyethylene; stake and connector made of ABS; all materials treated with UV inhibitors.

Deliver precise, even watering to plants with the Pressure Compensating Dripper Assembly. Ready to install, the dripper and inlet come preassembled and includes a stake. Patented Clamp N Pierce Connector pierces supply tubing and attaches inlet at once. PC emitters deliver the same output of water even when the water pressure varies, and maintain the same flow rate at any point along the length of tubing. Self-cleaning emitter with turbulent flow design flushes out sediments to reduce clogging. Dripper and tubing made of polyethylene; stake and connector made of ABS; all materials treated with UV inhibitors.

The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a T intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it is easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS).

Sprinkler valve bleed screw pack can be used to replace damaged electric valve bleed screws. This pack includes 2 brass valve bleed screws. For use with WaterMaster and Orbit Automatic Sprinkler Valves.

"Champion 15 Series Plastic Sprinkler Nozzles with adjustable flow. Compatible with most brand spring pop-up sprinklers and 1/2"" male NPT sprinkler stems."

6 in. x 1/2 in. x 1/2 in. - 6 in. long with 1/2 in. x 1/2 in. male pipe threaded elbows, swing pipe assembly.

"Made from impact resistant ABS construction with 1/2"" NPT inlet and filter. Plastic shrub sprinkler with plastic nozzle and adjustable spray arc."

The Brass Adjustable Pattern spring loaded pop-up nozzle will provide years of durable service. Fits Orbit, Rain Bird and Hunter pop-up sprinklers. Easy pattern adjust from 25 degree to 360 degree.

Champion S9 Series Brass Shrub Sprinklers. Full circle spray.

Supply precise watering to your plants to help them grow and thrive with the 1 GPH Take-A-Part Flag Dripper. This emitter keeps the soil moist around the plants root zone for optimal hydration. Ideal for watering individual plants, shrubs and trees, & plants in containers and hanging baskets. The color-coded flag indicates the GPH the dripper delivers, but does not adjust the water flow. How did the Take-A-Part Flag Dripper get its name? The emitter pulls apart for clean out when you tug the flag.

"Blu-Lock is the cleanest, fastest, most reliable way to build and maintain an environmentally-friendly, professional sprinkler system. With the revolutionary ""push-and-go"" design, simply insert pipe into fitting to create a secure, leak-free connection. No Clamping, No Gluing, No Waiting. Compatible with Hydro-Rain and Eco-Lock push fittings and pipe. WARNING: For non-mainline cold water outdoor irrigation connections only. Do not insert fingers."

If you thought setting up a drip irrigation system is time consuming and a lot of hard work, think again. The Adjustable Flow Bubbler Assembly comes preassembled for a faster install. Easy to connect with patented Clamp N Pierce connector which snaps inlet into supply tubing by hand-no tools required. The 4-stream bubbler emits water in half-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Dial allows you to control output with a twist. Bubbler and tubing are made of polyethylene; stake and connector are made of ABS; all materials treated with UV inhibitors.

For more than 30 years, Raindrip. Has been a leader in efficient irrigation solutions for the residential market producing innovative products that are easy to install and use.Today, Raindrip manufactures a complete range of products with one of the widest selections of drip and micro-irrigation products available in the industry.

"Champion 15 Series Plastic Sprinkler Nozzles with adjustable flow. Compatible with most brand spring pop-up sprinklers and 1/2"" male NPT sprinkler stems."

Connect supply tubing or dripline to a faucet or other 3/4 in. male pipe thread connection using the Smart Loc Universal Swivel Adapter. The unique design of the fitting accommodates tubing and dripline of multiple sizes: 1/2 in., 5/8 in., and 0.710 in., and attaches with a secure seal. The blue swivel end smoothly rotates 360 to prevent tubing from kinking or bending. Reusable fitting is made of acrylonitrile butadiene styrene (ABS), and comes with a filter washer.

"Champion 15 Series Plastic Sprinkler Nozzles with adjustable flow. Compatible with most brand spring pop-up sprinklers and 1/2"" male NPT sprinkler stems."

Insert a 90 bend to your drip system with the 1/4 in. Barbed Elbow. This micro fitting connects two sections of 1/4 in. supply tubing or dripline, or connects 1/4 in. tubing to a punched hole on any size supply line. To install, insert the single-barbed tip inside the drip tubing opening and anchor in place. For rigid tubing, try soaking the tube in hot water or leaving out in the sun to make it more pliable. Use the fittings to set up a new drip system or expand or repair an existing system. Reusable micro fitting is made of acrylonitrile butadiene styrene (ABS).

"Champion 15 Series Plastic Sprinkler Nozzles with adjustable flow. Compatible with most brand spring pop-up sprinklers and 1/2"" male NPT sprinkler stems."

Toro's H2FLO Precision Series sprinklers and nozzles are the most complete and efficient spray nozzle available.

This multi-stream dripper head is an efficient and gentle way to water potted plants and flowerbeds. The control knob adjusts water flow and spray distance. It is easily threaded on a 0.25 in. riser or sprinkler stake.

Connect your drip tubing or dripline to your water source with the 1/2 in. X 3/4 in. FHT Compression Swivel Adapter. Designed for convenience, the built-in swivel keeps the tubing from bending and kinking when installing the adapter in place. Threads onto a hose bibb or garden hose on one end; 1/2 in. supply tubing inserts into the compression ring on the other end, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. Compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Champion S9 Series Brass Shrub Sprinklers. Side strip spray.

Create instant humidity and cool down temperatures with the Winged Jet Assembly with mist spray. The jet and riser come preassembled with the 1/4 in. barbed inlet-ready to connect to 1/4 in. supply tubing. Works upright or installed upside down. The emitter delivers water in a full-circle pattern mist of up to 6.8 GPH and radius of up to 1.3 ft. (at 15-50 PSI). Jet and riser are made of polyethylene treated with UV inhibitors.