Other for Irrigation

Professional Series is ideal for use in residential and commercial landscapes or high maintenance areas with ease. Adjustable pattern nozzle allows you to place water exactly where you want, it off sidewalks, buildings and driveways. The sprinkler offers a molded, pressure activated wiper seal that excessive flow-by and cleans the stem upon completion of watering. The installed dual-port flush plug provides for easy clean out and easy access nozzle installation. The sprinkler body attaches to a 1/2 in. pipe thread riser easy installation.

Quick connect fittings and pipe speed up installation and are friendly for the environment. PVC-Lock is an easy-to-use fitting that will save you time and eliminates the need for messy (and toxic) Primer and Glue. The PVC-Lock. fitting easily pushes on standard PVC pipe, where it locks in place and is ready to use.

The unique twin spray design is engineered to provide uniform coverage, eliminating dry spots close to the shrub head. Great for watering shrubs and flower gardens. Pressure rating is 120.

570Z pro series 2 inch (5.1 centimeter) pop-up body for use with any Toro nozzle. Easily replace a damaged existing sprinkler head or create a custom sprinkler using any Toro nozzle and pop-up body combination.

Brass Nozzle-15 feet radius-three-quarter spray. The feet are a description related to the radius of the spray from the center of the nozzle out. These radius are achieved in no wind situation and with 30 PSI at the sprinkler head.

The Plastic Shrub Head has a side-strip pattern nozzle with a flow-adjustment screw to adjust spray distance and water flow. A pre-installed pressure regulator delivers a constant 30 psi the precise pressure at which spray nozzles operate best. Delivers even and consistent water coverage over a nozzle's radius. No over spray or misting due to an over pressurized system.

The spring-loaded pop-up sprinkler head with half spray pattern nozzle, with its standard plastic cap and long lasting, durable construction, offers convenience, ease and value. This medium area sprinkler head includes a plastic nozzle with an adjustment screw for easy flow and radius adjustment. A drop-in filter helps prevent a plugged nozzle. A stainless steel retraction spring and a wiper seal to keep out sand and grit.

Trusted for decades, Rain Bird MPR Nozzles are installed by more contractors than all other brands combined. MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same circuit while maintaining even water distribution rates. They fit all Rain Bird spray heads and shrub adapters. Sort Quicker, Install Faster, Check Easier. Rain Bird MPR Spray nozzles are color-coded on the top to enhance your productivity. Quickly identify radius and arc with Top Color-coded nozzles. * Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating. Now it's easier to sort, easier to organize and easier to install with …

The New Orbit Professional Series 4 in. spray head brings rugged elegance to the irrigation market. It is ideal for use in residential and commercial landscapes and handles the most intricately designed, high maintenance areas with ease. Professional Series Quarter pattern nozzle provides uniform coverage and long lasting performance. There are two seals on the cap, a radial seal and a face seal. There are two more seals on the riser making leaks a thing of the past.

Orbit Sprinkler Flag 10 pack is great for marking locations of heads, valves and drains.

Trusted for decades, Rain Bird MPR Nozzles are installed by more contractors than all other brands combined. MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same circuit while maintaining even water distribution rates. They fit all Rain Bird spray heads and shrub adapters. Sort Quicker, Install Faster, Check Easier. Rain Bird MPR Spray nozzles are color-coded on the top to enhance your productivity. Quickly identify radius and arc with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating. Now it's easier to sort, easier to organize and easier to install with …

The benefit of Rain Bird Dual Spray nozzles is clearly visible in side-by-side comparisons with standard, single-orifice spray nozzles. The second orifice on the Dual Spray allows for superior close-in watering. With the efficiency of Dual Spray nozzles, you may reduce watering times by more than 30%.

The spring-loaded pop-up sprinkler head with quarter pattern spray nozzle, with its standard plastic cap and long lasting, durable construction, offers convenience, ease and value. This medium area sprinkler head includes a plastic nozzle with an adjustment screw for easy flow and radius adjustment. A drop-in filter helps prevent a plugged nozzle. A stainless steel retraction spring and a wiper seal to keep out sand and grit.

The spring-loaded pop-up sprinkler head with full spray pattern nozzle, with its standard plastic cap and long lasting, durable construction, offers convenience, ease and value. This medium area sprinkler head includes a plastic nozzle with an adjustment screw for easy flow and radius adjustment. A drop-in filter helps prevent a plugged nozzle. A stainless steel retraction spring and a wiper seal to keep out sand and grit.

Orbit PVC-Lock Elbow is used to install PVC sprinkler systems. PVC-Lock is an easy-to-use fitting that will save you time and eliminates the need for messy (and toxic) Primer and Glue. The PVC-Lock. fitting easily pushes on standard PVC pipe, where it locks in place and is ready to use; no glues, primer, clamps, tools or drying time required.

Plastic Umbrella Bubbler

Rain Bird AP Nozzles can be adjusted to the exact pattern of your lawn, ensuring your landscape will be precisely watered, so you don't need to worry about it. They are ideal for odd shaped corners and smaller grassy areas around sidewalks and driveways, they can also be used for watering flowerbeds or shrubs.

Trusted for decades, Rain Bird MPR Nozzles are installed by more contractors than all other brands combined. MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same circuit while maintaining even water distribution rates. They fit all Rain Bird spray heads and shrub adapters. Sort Quicker, Install Faster, Check Easier. Rain Bird MPR Spray nozzles are color-coded on the top to enhance your productivity. Quickly identify radius and arc with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating. Now it's easier to sort, easier to organize and easier to install with …

The unique twin spray design is engineered to provide uniform coverage, eliminating dry spots close to the shrub head. Great for watering shrubs and flower gardens. Pressure rating is 120.

Rain Bird AP Nozzles can be adjusted to the exact pattern of your lawn, ensuring your landscape will be precisely watered, so you don't need to worry about it. They are ideal for odd shaped corners and smaller grassy areas around sidewalks and driveways, they can also be used for watering flowerbeds or shrubs.

PVC-Lock fittings are designed for both constant and non-constant pressure outdoor irrigation use as a direct replacement for Schedule 40 PVC fittings. Tested to IGC 300 standards, PVC-Lock can withstand even the harshest of conditions associated with mainline valve-in and lateral line valve-out irrigation applications. Stainless steel teeth grip the pipe tightly and a special O-ring creates a watertight seal while still allowing for rotation of the fitting after insertion. A special advantage is that you can immediately pressurize the system with no wait time for joints to cure. The PVC lock bevel tool reduces the force required to insert pipe into fittings. The PVC-Lock removal tool enables …

Trusted for decades, Rain Bird MPR Nozzles are installed by more contractors than all other brands combined. MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same circuit while maintaining even water distribution rates. They fit all Rain Bird spray heads and shrub adapters.

Rain Bird AP Nozzles can be adjusted to the exact pattern of your lawn, ensuring your landscape will be precisely watered, so you don't need to worry about it. They are ideal for odd shaped corners and smaller grassy areas around sidewalks and driveways, they can also be used for watering flowerbeds or shrubs.

Trusted for decades, Rain Bird MPR Nozzles are installed by more contractors than all other brands combined. MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same circuit while maintaining even water distribution rates. They fit all Rain Bird spray heads and shrub adapters. Sort Quicker, Install Faster, Check Easier. Rain Bird MPR Spray nozzles are color-coded on the top to enhance your productivity. Quickly identify radius and arc with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating. Now it's easier to sort, easier to organize and easier to install with …