Wire Detectors

The item is Zircon StudSensor Pro SL Edge Finder Deep-Scanning Stud Finder with SpotLite Pointing System
Used for Test & Measurement, Rotary Lasers
The product is manufactured in China
zStud Scan mode locates the edges of wood or metal studs up to ¾ inch (19 mm) deepDeepScan mode doubles the scanning depth to 1½ inches (38 mm)
Red LEDs light up every time a stud edge is approached.
Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached.
Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location.

The Zircon StudSensor Edge stud finder finds the edges of wood and metal studs behind walls. The easy-to-read display and patented SpotLite Pointer System clearly identify the edge of the target. The patented pivot pinch grip design allows for a comfortable, secure hold in either hand, at any angle.

Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep
Scans for metal and live AC wires
Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" deep

Zircon's MS 740 is a multi-surface scanner with 4 modes that allow you to detect and mark the location of studs, metal and live AC wiring
ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results
Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists. Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster. AC Scan finds and traces live, unshielded electrical AC wires …

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe)
Shows the depth of metal from the surface in both inches and centimeters
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more

Locates the edges of wood or metal studs up to 3/4-Inch (19mm) deep
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51mm) deep
Updated SpotLite Pointer shines an arrow-shaped light on the wall to mark the target
All-new Patent-Pending Pinch Grip Design
Patented TruCal technology indicates when the tool is calibrated and ready

Quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings up to a depth of 1-1/2 inch. The SpotLite Pointing System shines a beam of light on the wall to identify the target, and WireWarning detection indicates live AC voltage. TruCal technology calibrates to any wall's density and a steady green LED light alerts the user when the tool is calibrated and ready to scan. The tough, ergonomic housing withstands everyday jobsite use.

STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200

Wall stud and electrical wire finder
LCD screen with center find
One pass technology
Audible indicators alert you when studs and wires are detected
Reads depth up to 3/4"

STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
Pocket-size stud sensor detects and locates studs and joists up to a 3/4" depth
LED display and buzzer indicates stud edge
High-impact, ergonomically-designed ABS case includes pencil notch for pinpoint marking
Calibrates automatically for surefire accuracy. LED's include low battery warning
Limited Lifetime Warranty

Get dependable detection of wall studs with this durable STANLEY Magnetic Stud Finder. Maneuver with ease with its 1-3/8 in. x 1-3/8 in. size as you quickly locate steel nails and screws used to hold drywall to studs. The stud finder’s notched base allows the user to conveniently mark spots once studs are found.

Commercial High sensitivity and large radar antennas that are embedded in concrete, conductive wires, and resin pipes with high precision detecting deep into the wall
Maximum detection depth 7.1 inches (180 mm) (dry concrete rebar, φ0.4 inches (10 mm) or higher)
Full color LCD and backlight Excellent visibility with large 4.1-inch LCD monitor
You can choose between two modes depending on the burial state. Single Detection Mode: For straight burial objects such as rebars. Intuitively detect burial Multi-Detection Mode: Easily detect objects that pass diagonally through CD pipes, PF tubes, etc
14.4 V, 18 V, sliding Li-ion battery specifications