USA
Catalog   /   Tools & Gardening   /   Power Tools   /   Routers & Trimmers

Comparison Sturm ER1198B vs Bosch GKF 550 Professional 06016A0020

Add to comparison
Sturm ER1198B
Bosch GKF 550 Professional 06016A0020
Sturm ER1198BBosch GKF 550 Professional 06016A0020
Outdated Product
from $117.57 
Expecting restock
TOP sellers
Typeverticaledging
Power sourcemains (230 V)mains (230 V)
Specs
Power980 W550 W
Min. speed13000 rpm
Max. speed33000 rpm33000 rpm
Max. collet diameter8 mm6 mm
Max. cutter diameter30 mm
Stroke37 mm
Functions
speed control
 
General
In box
template guide
safety limiter
guide rail
case (bag)
 
 
guide rail
 
Weight1.8 kg1.4 kg
Added to E-Catalogapril 2019february 2019

Type

The general design features and purpose of the router depend on the type.

Vertical. The classic, most common type of milling cutter. As a rule, vertical devices consist of the motor itself and a specially designed sole that provides support during operation. The sole is often made adjustable in height, which allows you to change the distance at which the cutter protrudes and, accordingly, the depth of processing. However, this change can be accomplished in another way.

- Edge. In accordance with the name, this type of router is intended mainly for edge processing and chamfering. Such units are lighter and more compact than vertical ones, which, in particular, facilitates work in cramped conditions. On the other hand, they are less productive and have fewer customization options (in particular, they are very rarely equipped with adjustment of the processing depth).

- Lamellar. Specialized milling cutters designed for cutting grooves for lamellas - fasteners in the form of thin plates. The design of such a tool is such that each groove is cut literally in one movement - this significantly speeds up and simplifies the work. Lamella milling cutters, as a rule, are not intended for other purposes.

Additive. Similar to the lamellar ones described above, filler milling cutters are used to cut out “...seats” for fasteners. However, in this case, these places are intended for dowels - oblong products with a round or elliptical cross-section (also known as choppers or dowels) and are not grooves, but holes, usually quite deep.

- For removing nail polish. The purpose of this type of router is clear from the name: they are used for removing paint and varnish coatings; the principle of their operation is similar to angle grinders (“grinders”). When removing varnish, you often have to deal with fairly large areas to be processed, so a tool of this type, as a rule, allows the use of large cutters that provide a larger working width. In this case, the engine power may be low, because The load on the cutter in this case is small.

— Milling motor. This type can be described as milling cutters with minimal equipment - consisting of a motor in a body, a spindle and a collet and devoid of a base, guide rails and other similar devices. As a rule, such tools have an oblong body and a fairly small size and weight, which gives quite a wide range of possibilities for their use - from working as an impromptu hand engraver to installing it on an automated machine. However, in most cases, motors for milling cutters will still require additional accessories.

— For cutting tiles. Another type of milling cutter, the purpose of which is described by its name. Such devices themselves have an oblong body and operate similarly to drills; however, the matter is not limited to round holes along the diameter of the cutter - a cutter can also be used to cut a line in the material, for example, to create a hole for an exhaust fan, or to cut a fragment of a non-standard shape. Such features are indispensable when working with tiles.

- Disk. Milling cutters using a disc-shaped cutting attachment. Their main purpose is to cut grooves. In design and principle of operation, milling cutters of this type are similar to circular saw, however, these tools cannot be equated. Unlike saw, disc routers do not cut through the entire thickness of the material - they only create a groove of a certain depth, usually a V-shaped profile, on the surface. Additionally, they use cutters instead of saw blades. One of the most popular uses for this tool is cutting fold lines on aluminum sheets.

Power

The total power of the router, more precisely, the engine installed in it. The higher this indicator, the more productive the device is, the better it copes with complex work, the more force on the cutter (torque) it provides during operation, and the greater the spindle speed can be (although a powerful tool is not necessarily high-speed). On the other hand, high power significantly affects the dimensions, weight and price of the tool, plus power consumption and network load increase accordingly. In addition, high torque in some cases (for example, with delicate processing) is frankly undesirable. Therefore, a tool should be chosen according to this parameter, taking into account the real needs and the specifics of the planned work.

There are three main categories of milling cutters in terms of power: light (up to 700 W), designed mainly for simple household work; medium (up to 1500 W), able to cope not only with domestic, but also with most professional tasks; and heavy (1500 W or more), used in cases where high power is critical. However, this gradation is true only for routers (see "Type"), other varieties have their own specifics: for example, lamellar models, in principle, do not need high power.

Min. speed

The slowest spindle speed (in revolutions per minute) provided by the router motor.

For different jobs, the optimal spindle speed (and, accordingly, the cutter) will also be different. For example, hard materials like stone require fast rotation, but wood does not; some types of nozzles work better at high speeds, others at low speeds, etc. Detailed recommendations for each specific case can be found in special sources. Here we note that the smallest value of the minimum number of revolutions found in modern milling cutters is about 3000 – 5000, and in the most "fast" models this figure can exceed 15000. When choosing, pay attention not so much to the minimum rotation speed as to the total speed range — how it corresponds to the planned tasks.

Max. collet diameter

The largest collet size that the router can use.

A collet is a special type of fastening used, in particular, for installing working nozzles in milling cutters. For proper installation, the size of the collet must match the size of the cutter shank. Modern cutter shanks and collets for them have standard sizes - 6, 8 or 12 mm. The larger the size, the larger the cutter itself, the more powerful the tool and the more difficult the work for which it is intended.

As a rule, the maximum size of the collet is the size of the fixture that is standardly installed in the router. Thinner cutters can be mounted using special adapters (however, care must be taken, as such a nozzle may not be designed for the increased power characteristic of tools with a large collet).

6mm collets are found predominantly in light routers (see "Power"), 8mm mounts are found in most intermediate and professional level tools, and 12mm collets are found in the most powerful and heavy models.

Max. cutter diameter

The largest diameter of the cutter that can be installed in the router.

The larger the cutter, the faster its cutting edge moves and the more material it can capture, but larger nozzles require more torque. Accordingly, the maximum diameter of the cutter is directly related to the power of the tool (see above): the larger the allowable size of the nozzle, the more powerful and advanced, usually, the router is. However, large cutters (as, in fact, high power) are not always really needed. Therefore, when choosing according to this parameter, it is worthwhile to adequately evaluate the upcoming work and not chase the maximum size.

Stroke

The distance by which the height of the cutter can change relative to the support platform of the router, in other words, to what depth the working nozzle can be lowered relative to the upper position. This parameter is used for vertical and edge models (see "Type"); however, edge routers with height adjustment are very rare. In fact, the amount of travel not only describes the maximum working depth provided by the tool, but also indicates the presence of depth adjustment; for models without such adjustment, this parameter is not indicated at all.

As for specific numbers, for simple household work, a stroke of 25–30 mm is considered quite sufficient, and in a more serious tool, values of 70–80 mm can be found.

Functions

Soft start. The presence of a soft start engine in the design of the milling cutter. A feature of most modern electric motors is that when connected to the network directly, without control circuits, at the time of start-up, there is a sharp jump in current through the motor. This, on the one hand, creates voltage fluctuations in the mains (which can “knock out” fuses or become fatal for some devices operating nearby), on the other hand, it leads to a sharp jerk of the tool, due to which it can be released from hands (and this cause damage to surrounding objects and even injury). This function also limits the current at the moment of starting the motor. Due to this, the speed increases smoothly, without jerking the tool, and the power grid is not subjected to excessive overloads.

Adjustment of frequency of rotation. The presence of a speed controller in the design of the milling cutter. This function allows you to change the spindle speed, adjusting it to different types of work — for example, to effectively cut hard material, you may need a high speed, and with soft woods, you can work at low speeds. Tools with speed control will be useful especially for those who have to deal with a wide variety of materials. In this case, the range of such adjustment may be different.

Microlift. The presence in the design of the router of a system for fine-tuning...the depth with an accuracy of 0.1 mm. The standard setting with the limit pin is very coarse, as the errors are quite large. The microlift is used where it is important to set the depth very accurately. It is implemented mainly by means of a threaded connection that limits the vertical downward movement, or is completely integrated into the vertical travel design, where unlocking is not needed to make the necessary adjustments.

Backlight. The presence of a lighting system in the design of the router — in fact, an ordinary flashlight that facilitates work in dimly lit places. The need for backlighting may arise even in daylight or bright artificial lighting — the place of work is quite often in the shade (for example, from the head of the operator himself).

— Maintain momentum. The presence in the design of the milling cutter of a system that automatically adjusts the engine operation mode depending on the load on the working nozzle — in such a way that the rotational speed remains constant, does not fall under load and does not increase at idle. Thanks to this adjustment, a constant quality of processing is ensured, practically independent of the pressure on the nozzle, wear of the nozzle and the tool itself is reduced, as well as overall energy consumption.

In box

Additional equipment included in the delivery of the router in addition to the device itself.

Fresa. Working nozzles — milling cutters — can be included in the delivery set of milling cutters, this eliminates the need to purchase such nozzles separately. On the other hand, before buying a tool with this feature, you should make sure that the complete cutters correspond to the features of the planned work — otherwise you may overpay for unnecessary nozzles. Usually, there are several cutters in the set.

Dust collector. A special container for collecting dust, sawdust and other debris generated during the operation of the router. Most often it is made in the form of a soft bag, and a special pipe is used to connect to the tool (a vacuum cleaner can also be connected through the same pipe). Note that the overwhelming majority of modern milling cutters are equipped with nozzles for dust collectors, but the bags in the kit are relatively rare. Usually, a dust bag can be purchased separately, but for some users it is preferable to immediately buy a tool with a bag.

Copy base. The copy base is the base (sole) of the router (see "Type"), specially designed to work with copy sleeves. The copy sleeve is a ring fixed on the tool body, into which the cutter is threaded. When working with such a sleeve, the operator rests the outer edge of the ring agai...nst the template and moves the tool in such a way that the base is constantly pressed against the template. Thus, the distance between the cutter and the template remains unchanged, and the working nozzle repeats the shape of the template; this is indispensable for precise work, especially with lines of complex shape. Many routers allow you to install a copy sleeve on a regular sole, however, there are models in which you need to install a special copy base for this. Such a base has certain differences from the standard one, due to the specifics of the work — in particular, it usually does not have depth adjustment, because. the presence of an adjustment mechanism can adversely affect the accuracy of work.

— Protective limiter. The protective limiter is a small ring that covers the working nozzle. This ring, as the name suggests, provides additional protection for the operator from dust, chips and other debris generated during operation. In addition, it prevents foreign objects (primarily fingers) from getting under the cutter and increases the efficiency of collecting debris in a vacuum cleaner or dust collector (see above). And so that the operator can control the process of work at the same time, the protective limiter is usually made transparent.

— Guide rail. A device designed primarily to ensure that the router during operation can move parallel to the edge of the material being processed. The rail rests against this edge during operation, and the tool itself extends a certain distance from it on special guides. Thus, it is possible to cut recesses parallel to the edge of the workpiece. The distance from the rail to the cutter can be adjusted, some models even provide special scales on the rail itself.

— Case / bag. This category includes all devices designed for storing and transporting tools; at the same time, hard containers in the form of characteristic suitcases are usually called cases, while bags, on the contrary, are made of soft materials. Anyway, the case / bag simplifies storage and carrying: firstly, due to the fact that such devices themselves are more convenient for long-term carrying than a tool; secondly, due to the fact that the router, the power cord, and all additional accessories can be folded into one place, reducing the risk of losing any of it.
Sturm ER1198B often compared
Bosch GKF 550 Professional 06016A0020 often compared