Comparison Acer Aspire 3 A315-42 [A315-42-R2HC] vs HP 15-db1000 [15-DB1097UR 7SF21EA]

The technology by which the matrix of the laptop is made.

Matrices of the TN+film, IPS and *VA types are most widely used nowadays; less common are screens like OLED, AMOLED, QLED, miniLED, as well as more specific solutions like LTPS or IGZO. Here is a more detailed description of all these options:

— TN-film. The oldest, simplest and most inexpensive technology currently in use. The key advantages of this type of display are low cost and excellent response time. On the other hand, such matrices are not of high image quality: brightness, colour fidelity and viewing angles of TN-film screens are at an average level. These indicators are quite enough for working with documents, web surfing, most games, etc.; however, for more serious tasks that require a high-quality and reliable picture (for example, design or photo / video colour correction), such screens are practically unsuitable. Thus, TN-film matrices are relatively rare nowadays, mainly among low-cost laptops; more advanced devices are equipped with better screens, most often IPS.

— IPS (In-Plane Switching). The most popular type of matrix for laptops in the middle and top price range; however, it is increasingly common in low-cost models, and for trans...formers and 2-in-1 devices (see "Type") it is almost a standard option. Screens of this type are noticeably superior to TN-film in terms of the quality of the “picture”: they provide a bright, reliable and rich image that hardly changes when the viewing angle changes. In addition, this technology allows to achieve extensive colour gamuts in various special standards (see below) and is suitable for creating displays with advanced features such as HDR support or Pantone / CalMAN certification (also see below). Initially, IPS matrices were expensive and had a slow response time; however, nowadays, various modifications of this technology are used, in which these shortcomings are fully or partially compensated. At the same time, different modifications may differ in practical characteristics: for example, some are created based on the maximum reliability of the picture, others differ in affordable cost, etc. So it's ok to clarify the actual characteristics of the IPS screen before buying — especially if you plan to use a laptop for specific applications where image quality is critical.

— *V.A. Various modifications of matrices of the "Vertical Alignment" type: MVA, PVA, Super PVA, ASVA, etc. The differences between these technologies are mainly in the name and the manufacturer. Initially, matrices of this type were developed as a compromise between IPS (high-quality, but expensive and slow) and TN-film (fast, inexpensive, but modest in image quality). As a result, *VA screens turned out to be more affordable than IPS and more advanced than TN-film — they have good colour reproduction, deep blacks and wide viewing angles. At the same time, it is worth noting that the colour balance of the picture on such a display changes somewhat when the viewing angle changes. This makes it difficult to use *VA matrices in professional colour work. In general, this option is designed mainly for those who do not need perfect colour accuracy and at the same time want to see a bright and colorful image.

— OLED. Matrices based on the so-called organic light-emitting diodes. The key feature of such displays is that in them each pixel is a source of light in itself (unlike classic LCD screens, in which the backlight is made separately). This design principle, combined with a number of other solutions, provides excellent brightness, contrast and colour reproduction, rich blacks, the widest possible viewing angles and a small thickness of the screens themselves. On the other hand, laptop OLED matrices for the most part turn out to be quite expensive and “gluttonous” in terms of energy consumption, and they wear out unevenly: the more often and brighter a pixel glows, the faster it loses its working properties (however, this phenomenon becomes noticeable only after several years of intensive use). In addition, for a number of reasons, such screens are considered poorly suited for gaming applications. In light of all this, sensors of this type are rare these days — mostly in individual high-end laptops designed for professional colour work and with appropriate features such as HDR support, wide colour gamut and/or Pantone / CalMAN certification (see below).

— AMOLED. A kind of matrices on organic light-emitting diodes, created by Samsung (however, it is also used by other manufacturers). In terms of its main features, it is similar to other types of OLED matrices (see above): on the one hand, it allows you to achieve excellent image quality, on the other hand, it is expensive and wears out unevenly. At the same time, AMOLED screens have even more advanced colour performance combined with better power optimization. And the low prevalence of this technology is mainly due to the fact that it was originally created for smartphones and only recently began to be used in laptops (since 2020).

— MiniLED. Screen backlight system on a substrate of miniature LEDs with a size of about 100-200 microns (µm). On the same display plane, it was possible to increase the number of LEDs several times, and their array is placed directly behind the matrix itself. The main advantage of miniLED technology can be called a large number of local dimming zones, which in total gives improved brightness, contrast and more saturated colors with deep blacks. MiniLED screens unlock the potential of High Dynamic Range (HDR) technology, suitable for graphic designers and digital content creators.

— QLED. Matrices on "quantum dots" with a redesigned LED backlight system. In particular, it provides the replacement of multilayer colour filters with a special thin-film coating of nanoparticles. Instead of traditional white LEDs, QLED panels use blue ones. As a result, a set of design innovations makes it possible to achieve a higher brightness threshold, colour saturation, improve the quality of colour reproduction in general, while reducing the thickness of the screen and reducing power consumption. The reverse side of the QLED-matrices coin is an expensive cost.

— PLS. A type of matrix developed as an alternative to the IPS described above and, according to some sources, is one of its modifications. Such matrices are also characterized by high colour rendering quality and good brightness; in addition, the advantages of PLS include good suitability for high-resolution screens (due to high pixel density), as well as lower cost than most IPS modifications, and low power consumption. At the same time, the response speed of such screens is not very high.

— LTPS. An advanced type of TFT-matrix, created on the basis of the so-called. low temperature polycrystalline silicon. Such matrices have high colour quality, and are also well suited for screens with high pixel density — in other words, they can be used to create small displays with very high resolution. Another advantage is that part of the control electronics can be built directly into the matrix, reducing the overall thickness of the screen. On the other hand, LTPS matrices are difficult to manufacture and expensive, and therefore are found mainly in premium laptops.

— IGZO. An LCD technology that uses a semiconductor material based on indium, gallium, and zinc oxides (as opposed to more traditional amorphous silicon). This technology provides fast response time, low power consumption and very high colour quality; it also achieves high pixel densities, making it well-suited for ultra-high resolution screens. However, while such displays in laptops are extremely rare. This is explained both by the high cost and by the fact that rather rare metals are used in the production of IGZO matrices, which makes large-scale production difficult.

The result shown by the laptop processor in the Passmark CPU Mark test.

Passmark CPU Mark is a comprehensive test that is more detailed and reliable than the popular 3DMark06 (see above). It checks not only the gaming capabilities of the CPU, but also its performance in other modes, based on which it displays the overall score; this score can be used to fairly reliably evaluate the processor as a whole (the more points, the higher the performance).

The result shown by the laptop's graphics card in 3DMark06.

This test primarily determines how well a graphics card handles intensive workloads, in particular, with detailed 3D graphics. The test result is indicated in points; the more points, the higher the performance of the video adapter. Good 3DMark06 scores are especially important for gaming laptops and advanced workstations. However, it is difficult to call them reliable, since measurements are made on video cards with different TDPs and an overall average score is given. Thus, your laptop can have either more or less than the specified result - it all depends on the TDP of the installed video card.

The presence in the laptop of an SSD-drive with support for NVMe technology (accordingly, the connector where this drive is connected also supports this technology).

NVMe is a data transfer standard designed specifically for SSD storage. It uses the PCI-E bus and allows you to maximize the possibilities of such memory. Initially, it was believed that NVMe makes sense to use mainly on high-performance systems, in particular gaming ones; however, the development and cheapening of technology has led to the fact that this feature is increasingly found in simpler laptops.

Also note that NVMe can be implemented through different hardware connectors. NVMe M.2 SSDs are the most common in laptops (see "M.2 Drive Interface" above), but there are other options — in particular, the ultra-compact U.2 connector.

A device for working with removable memory cards. Usually, it looks like a characteristic slot right on the laptop case, into which the media is inserted. There are different standards for memory cards, a list of compatible standards is indicated in the note to this item. It is worth noting here that for modern laptops it is almost mandatory to support the SD format and its modifications — SD HC, often also SD XC; other options may also be envisaged, but they have not received such distribution. Anyway, this feature is convenient because memory cards are widely used in other types of electronics: for example, SD is the generally accepted standard in digital cameras, and microSD (compatible with SD slots through simple adapters) is used in smartphones. Accordingly, the presence of a card reader greatly facilitates the exchange of data between a laptop and external devices.

Number of USB 2.0 ports provided in the laptop.

USB of all versions is the most popular modern interface for connecting various peripherals to computer - from keyboards, mice and flash drives to very original devices. It can also be used to charge smartphones and other gadgets. The more USB ports laptop has, the more peripherals you can connect to it without using splitters. Specifically, USB 2.0 is the earliest version found in modern laptops. It uses regular full-size connector and provides speeds of up to 480 Mbit. In light of the emergence of faster and more advanced versions of USB 2.0, it is considered obsolete; more and more laptops are being produced that do not have such connectors at all. At the same time, this interface is still far from completely disappearing, especially since its capabilities are quite sufficient for many peripheral devices.

Number of USB 3.2 gen1 ports provided in the laptop. Initially, this interface was called USB 3.0, later USB 3.1 gen1.

Be that as it may, USB is the most popular modern interface for connecting various peripherals to computer - from keyboards, mice and flash drives to very original devices. It can also be used to charge smartphones and other gadgets. And USB 3.2 gen1 is the successor to the popular USB 2.0. In this version, the data transfer speed was increased 10 times - up to 4.8 Gbit/s, and the power supply for external devices was also increased. At the same time, devices with other versions of USB can be connected to the USB 3.2 gen1 port - the main thing is that they have full-size USB A plugs and have enough power for normal operation.

As for the number of USB connectors, the more there are, the more peripherals you can connect to the laptop without using splitters.

The maximum number of monitors that can be connected to a laptop at the same time and shared.

Simultaneous connection of several screens allows you to expand the visual space available to the user. For example, it can be useful for designers and layout designers when working with large-format materials, for programmers to separate tasks (one monitor for writing code, the second for searching for the necessary information and other auxiliary purposes), and for gamers-enthusiasts — to ensure the maximum immersion effect.

This paragraph may specify the availability of special digital and physical security features: fingerprint or face scanners, TPM security module, Smart Card reader and kensington/noble lock. Here is a detailed description of these features:

— Fingerprint scanner. Fingerprint recognition device. Almost the only way to use this function is to authenticate the user — during the initial boot or unlocking of the laptop, when logging into an account, when confirming payments, etc. This authorization method is convenient because the fingerprint is always at the user's disposal, his it is impossible to forget, lose or accidentally "surrender" to an attacker, like a normal password; and forgery of a print, although possible, is very difficult. Also note that some laptops with this feature allow you to memorize several users and automatically recognize them “by touch”.

— Face scanner (FaceID). A specialized scanner for facial recognition. Note that this is not just about “recognition by photography” (any webcam is capable of this — with the appropriate software), but about full-fledged three-dimensional scanning using a special IR sensor. This allows you to achieve very accurate and reliable recognition — face scanners often surpass fingerprint sensors in these indicators. And thanks to advanced...algorithms, accuracy is maintained even when facial hair changes, putting on and taking off glasses, and other such changes. The weak point of this function is the recognition of twins, as well as children under 13 – 14 years old, who have not yet had time to form enough individual traits. As for the application, the main purpose of FaceID is to authorize the user when logging in and various accounts, making payments, etc. Separately, we note that support for this authorization method is built into Windows Hello, a biometric recognition system built into Windows 10. However, the data from the scanner can also be used for other purposes, sometimes quite original — for example, to animate a three-dimensional muzzle on the screen, copying the user's facial expressions.

— Kensington / Noble lock. The presence of a slot on the laptop case for a special security lock. Such a lock is usually used to fasten a strong metal cable, the other end attached to a fixed or heavy object. Thanks to this, theft "on a jerk" and other similar attempts to steal a laptop become almost impossible. This feature is especially useful if the device is in the public domain, such as on a display stand in an electronics store. Note that Kensington and Noble are two different types of security locks and are not mutually compatible. And the socket on the body can be designed for either one of these standards, or both at once; this point should be clarified separately.

— TPM security module. A module designed to encrypt information stored on a laptop is the so-called cryptoprocessor. Such a module stores the keys for decoding encrypted data, it is also responsible for the encryption/decryption process itself. At the same time, TPM allows you to "close" the file so that it opens only on a specific device — for example, on a laptop on which it was originally encrypted. This feature is unlikely to be required in domestic use, but it can be indispensable in the business area, where you have to deal with confidential data.

— Smart card slot. A device for reading contact smart cards — plastic cards with built-in microchips. It is convenient to use such cards as user identifiers and/or access keys to protect confidential information. Note that an NFC (see above) can become an alternative to this function — it also allows you to read smart cards, only contactless ones. However, contact readers are somewhat cheaper, and they are also considered more reliable and secure. So such equipment does not lose popularity among business and professional laptops; and some models are equipped with both an NFC and a slot for smart cards.