Comparison Electrolux KBW 5 X vs Electrolux ERW 1573 AOA

The maximum number of standard wine bottles (straight, Bordeaux type) that the cooler is designed to store.

The increase in capacity affects the dimensions and price of the entire device. So for private home use, a compact wine coolers of small capacity (up to 20 bottles) can be the best choice — especially since the height of such devices is usually small. However, low wine coolers can store more contents — 24 – 25 bottles or more. Models with a capacity of 50 – 80 bottles are already designed mainly for bars and restaurants, but they can also be useful for enthusiastic wine collectors; and the most voluminous of modern wine coolers can hold noticeably more than 80 bottles — in some units up to two or three hundred.

It is also worth noting that it is not recommended to fill wine coolers to their full capacity. The actual occupancy should be at least 30 percent lower than the maximum. So, when choosing, it is worth making an appropriate margin.

The total volume of the wine cooler working chamber (chambers).

Although the main spec of such units is the number of bottles (see above), volume data can also be useful when evaluating and comparing different models. The fact is that with the same capacity, a larger volume means better air circulation and more efficient temperature distribution. On the other hand, an increase in volume also increases the price and dimensions — and there may simply not be free space for a wide or high wine cooler.

The highest temperature in the working chamber that this model can provide.

Note that the optimal temperature for storing different wines is the same — about 10..12 °C; any wine cooler can work in this mode. And higher values may be required mainly for preparing red wines for serving — such wines, depending on the type and taste characteristics, should be served at a temperature of 13 to 18 °C. One can be found more detailed recommendations on this matter in special sources. However, the higher the maximum temperature of the wine cooler, the more opportunities it offers for adjusting the microclimate.

Note that an increase in temperature can be useful during storage, and not only for red wines: under such conditions, the ripening process is also accelerated.

The number of shelves provided in the design of the wine cabinet.

Such shelves are usually mounted on rails and can be removed if necessary. In some models, they can also be rearranged to another level. All this can be useful for organizing the space inside the cooler — for example, to accommodate large bottles of increased thickness, you can remove one of the shelves, providing the right amount of needed space. As for the quantity, it is selected by the manufacturer, taking into account the capacity, width and height of the working chamber, so this parameter is not that important when choosing.

The ability to change the height of the shelves inside the cooler.

Shelf height adjustment in wine coolers is usually carried out in the same way as in refrigerators: removable shelves are installed on rails. And to change the placement height, it is enough to rearrange the shelf to another pair of rails. It allows you to change not only the level of location of individual shelves but also their total number, adjusting the cooler to the specific situation.

— Interior lighting. Lighting installed in the working chamber. It allows you to see the contents of the cooler better. Lighting is useful since the working chamber is often in the shade, even in bright ambient light.



— Chamber heating. The ability of the cooler to work in heating mode. In temperature models, heating is used to prepare red wines for serving: we recall that such wines are stored at standard 11..12 °C, but the optimal serving temperature can be up to 18 °C, depending on the wine type. In climatic coolers, this function is designed mainly for cases where the ambient temperature drops below the optimum temperature of the working chamber. For example, in case of problems with room heating. In addition, increasing the temperature during storage speeds up the process of wine maturation, which can also be useful.

— Fast cooling. A special intensive cooling mode designed for situations where a large number of non-chilled bottles must be additionally placed in an already loaded wine cooler. If you do this in normal cooling mode, the temperature inside will rise noticeably, and it may adversely affect the wines already stored in the cabinet. During the fast cooling, excess heat is intensively removed from the working chamber. It helps to avoid microclimate disturbances. It is worth noting that this mode usually needs to be turned on in adv...ance, a few hours before loading a new batch of wine bottles, and turned off after a certain time to avoid overloads. These details must be given in the manufacturer's documentation.

— Chamber ventilation. The presence of a ventilation system in the working chamber of the cooler. Such a system prevents the accumulation of unpleasant odours that can adversely affect the taste of wine, penetrating through corks. Note that in models without a fan, air circulation also occurs, but it is much less intense.

— Humidity control. It is the ability to adjust the air humidity inside the wine chamber. Some wines are very demanding on storage conditions and require not only a certain temperature but also a certain humidity. The humidity control function allows you to set its optimal value. In addition, the humidity should not be lower than 70%. Otherwise, the cork dries out, and an excessive amount of air gets into the bottle, which accelerates the oxidation of the wine and worsens its taste.

— Charcoal filter. A special filter that removes foreign odours from the air in the wine cooler. Wine bottles are not completely sealed — some air constantly enters through the cork, which has a porous structure, and strong odours can thus enter the bottle and adversely affect the taste and aroma of the wine. The charcoal filter helps to avoid this. Note that it must be replaced from time to time.

— Anti-vibration system. System for smoothing various vibrations and shocks affecting the wine cooler. Such influences are extremely undesirable for storage — they disrupt the course of biochemical processes and can even spoil the product. The presence of an anti-vibration system is relevant mainly for coolers with compressors (see "Cooling type"). It is the compressor circuits that are most susceptible to vibrations. If such a unit does not have such a function, it is a low-cost model not designed for long-term and thorough storage of expensive wines. Or it is a device with a high-quality compressor, which initially has a low vibration level and can be used without special protection against them. As for thermoelectric cabinets, the fans used in them are also potential sources of vibration but not as intense as compressors. Therefore, in such units, an anti-vibration system rarely occurs.

— Reversible door. It is an ability at your discretion to choose the direction in which the door of the wine cabinet will open. This function allows you to adjust the design to the location; it can be useful in cramped conditions, where the door can normally open only in one direction.

— Door alarm. It is a system that monitors the closing of the wine cooler door. If the door is not closed for a long time or is not closed tightly enough, an audible or light (depending on the model) signal is given. It avoids a critical change in temperature and humidity in the wine chamber and preserves the quality of the wine.

— Failure indicator. It is a system that monitors the state of the wine cooler units and gives a signal in case of failure. It allows you to avoid unpleasant consequences, ranging from a critical change in storage conditions and damage to wine ending to serious breakdowns and even accidents.

— Child lock. A special lock designed mainly to prevent a curious little child from getting to the contents of the wine cooler. The child lock is turned on and off in a special way that does not create problems for an adult but is not available for a child. And in some models, such a lock is closed with a traditional key. It can also be used for general protection against unauthorized access to the contents of the wine cooler.

— No handle (push to open). Wine coolers equipped with doors without any handles. Accordingly, the opening method of such units differs from the usual one: the user needs to press the door lightly. A special closer is responsible for fixing the door; the mechanism securely fixes it and easily opens/closes. This feature does not affect the main functionality, but it can be very appropriate from a design point of view: for example, wine coolers with handleless doors are perfect for an interior in a minimalist high-tech design.

— Hidden door handle. Handle made in the form of recesses on the end of the door. This feature gives the cooler a neat, discreet appearance. In addition, an ordinary handle can be touched by careless movement, but with a hidden one, it is impossible. It is especially relevant in cramped conditions. Of any noticeable drawbacks of such a design, one can only name that it is less “grabbing” and reliable in holding than an ordinary handle. Because of this, some users find hidden handles less convenient; in addition, the aesthetic tastes of buyers are also different.

— Ordinary handle. Handles of a traditional design protrude noticeably on the door. Although the hidden design has several advantages, quite a few buyers still prefer the classic design. The main motive here is that ordinary handles can be gripped more securely, require less effort to open the door and are...generally more convenient to use. In addition, some users simply like the appearance of doors with handles.

The energy efficiency class characterizes how economically the wine cabinet consumes electricity. The highest class among modern units is A ++, then A +, A, B, C and further alphabetically.

Note that in this case, it is not energy consumption that is taken into account but consumption in comparison with units having similar specs (and the same type of cooling, see above). Therefore, a professional 80-bottle A++ wine cooler will consume more energy than a 15-bottle C-class unit. We also note that more economical devices have a higher price. However, they have a lower cost of maintenance during their life span.

This parameter characterizes the efficiency of electricity consumption by the wine cooler. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. Actually, this was originally conceived until more energy-efficient models pulled up to class A, which eventually received the marking A +, A ++, and A +++. Further development of technologies allowed us to go even further. And in order not to produce pluses in energy efficiency labelling, in March 2021, manufacturers returned to the previous indices from G to A, where A is the most energy-efficient wine cooler. Accordingly, the 2021 models will have modern markings, while older models will be marked in the same way.