USA
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison MSI GeForce RTX 2070 SUPER GAMING X TRIO vs Asus GeForce RTX 2070 SUPER ROG Strix OC

Add to comparison
MSI GeForce RTX 2070 SUPER GAMING X TRIO
Asus GeForce RTX 2070 SUPER ROG Strix OC
MSI GeForce RTX 2070 SUPER GAMING X TRIOAsus GeForce RTX 2070 SUPER ROG Strix OC
Outdated ProductOutdated Product
TOP sellers
InterfacePCI-E v3.0PCI-E v3.0
GPU
GPU modelNVIDIA GeForce RTX 2070 SUPERNVIDIA GeForce RTX 2070 SUPER
ArchitectureTuringTuring
Memory size8 GB8 GB
Memory typeGDDR6GDDR6
Memory bus256 bit256 bit
GPU clock speed1800 MHz1935 MHz
Memory clock14000 MHz14000 MHz
Lithography12 nm12 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark14656 score(s)14656 score(s)
Connections
HDMI12
HDMI versionv.2.0bv.2.0b
DisplayPort32
DisplayPort versionv.1.4v.1.4
USB C1
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors25602560
Texture units160160
General
Monitors connection44
CrossFire/SLI
Coolingactive (fan)active (fan)
Fans33
Lighting
Lighting syncMSI Mystic Light SyncAsus Aura Sync
Power consumption215 W215 W
Additional power8 + 8 pin8 + 8 pin
Minimum PSU recommendation650 W650 W
Number of slots2.72.5
Length
328 mm /328x140x56.5/
305 mm /305x131x49/
Added to E-Catalogjuly 2019july 2019

GPU clock speed

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

HDMI

The number of HDMI outputs provided by the graphics card.

HDMI is by far the most popular interface for high-definition video and multi-channel audio (it can be used for video and audio at the same time). This connector is almost standard for modern monitors, in addition, it is widely used in other types of screens — TVs, plasma panels, projectors, etc.

The presence of several outputs allows you to connect several screens to the graphics card at the same time — for example, a pair of monitors for organizing an extended workspace. However, there are never more than 2 HDMI ports in video cards — for a number of reasons, for several screens at once, in this case it is easier to use other connectors, primarily DisplayPort.

DisplayPort

The number of DisplayPort outputs provided by the graphics card.

DisplayPort is a digital media interface similar in many ways to HDMI, but primarily used in computers. The specific capabilities of this interface depend on the version (see below), but even in the most modest modern version of DisplayPort, it allows at least 4K at 60 frames per second and 5K at 30 fps. Another interesting feature of this standard is the ability to daisy-chain multiple screens to one port (“daisy chain” format).

In light of the latter, we can say that the number of DisplayPort outputs corresponds to the number of screens that can be connected directly to the graphics card, without using a daisy chain. Such a connection may be required, in particular, for monitors that do not support daisy chaining. If such a mode is supported, the maximum number of screens will be at least twice as high as the number of connectors. However, it is worth considering that the resolutions supported by the video adapter itself may not reach the maximum capabilities of the DisplayPort version used.

USB C

The number of USB Type C outputs provided in the graphics card.

Note that USB Type C is only a type of physical connector; specific methods of its application may be different, they should be clarified separately. However, most video cards with this feature have VR support (see below), and this connector is used in them just to connect virtual reality glasses and helmets. Another use case is somewhat less common — connecting monitors via the Thunderbolt v3 interface: this version uses a Type C hardware connector. In both cases, there is usually only one output of this type — this is quite enough.

CrossFire/SLI

Graphics card support for CrossFire or SLI technology.

CrossFire and SLI are ATI and nVidia development technologies, respectively, that allow you to use two video cards on one computer. Their capacities are combined, which allows to achieve high graphic performance of the system. This implies unification at the hardware level, with the connection of video cards using special “bridge” connectors.

It makes sense to install two video cards on high-performance computers designed to work with "heavy" graphics — for example, advanced gaming PCs or workstations used for 3D rendering. To use CrossFire/SLI, the corresponding technology must be supported not only by the installed video cards, but also by the motherboard; to install video cards, you need PCI-E connectors of the same version. The video cards themselves in the case of SLI must be exactly the same; CrossFire requirements are a little softer — in this case, at least one of them must belong to the ATI CrossFire Edition family.

Lighting sync

Backlight synchronization technology provided in a graphics card with an associated design.

By itself, synchronization allows you to "match" the backlight of the graphics card with the backlight of other system components — the motherboard, case, keyboard, mouse, etc. Thanks to this matching, all components can change colour synchronously, turn on / off at the same time, etc. Specific features the operation of such backlighting depends on the synchronization technology used, and, usually, each manufacturer has its own (Mystic Light Sync for MSI, RGB Fusion for Gigabyte, etc.). The compatibility of the components also depends on this: they must all support the same technology. So the easiest way to achieve backlight compatibility is to collect components from the same manufacturer.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
MSI GeForce RTX 2070 SUPER GAMING X TRIO often compared
Asus GeForce RTX 2070 SUPER ROG Strix OC often compared