Comparison Whirlpool W7 911O OX stainless steel vs Whirlpool W7 911I OX stainless steel

The refrigeration circuit can be described as a heat sink system that has a separate connection to the compressor (see “Number of compressors”) and a separate, independent from other similar systems, regulation of the operating mode.

In the most common variety of modern refrigerators — two-chamber models with a freezer — both one common circuit for both chambers and 2 circuits can be provided. The second option is more expensive, but it gives an important advantage — in such refrigerators, you can completely independently control the operating modes of the refrigeration and freezer compartments. If there is only one circuit, these adjustments turn out to be interconnected: for example, when you turn on the fast freeze mode (see "Features"), the main chamber also starts to work at increased cooling power, which is not always desirable.

As for refrigerators with three or more chambers, usually, the number of circuits in them is less than the number of chambers — otherwise, the design would be unnecessarily complex, cumbersome and expensive.

Various special features provided in the refrigerator, such as holiday mode, control via smartphone, child lock, ( LED display or TFT display), door alarm reversible door. And now in more detail:

— Holiday mode. A special mode of operation in case of a long absence of users — when there is no foodstuff in the refrigerating chamber and there is no need for the unit to work intensively. In holiday mode, the temperature inside is maintained at about 12 °C; this prevents the growth of mould and unpleasant odours, while the energy consumption is very low.

— Control via smartphone. The ability of access to control the refrigerator via the Internet. The refrigerator, usually, is connected to the World Wide Web using Wi-Fi — via a router or a smart home system. The convenience of this function is obvious: it allows you to control the operation of the unit from anywhere in the world where there is an Internet connection. However, the specific implementation of such control may be different: some models of refrigerators use an application installed on a smartphone or tablet, and others allow you to work through a web page available in any browser. However, the user can thus obtain various data on the unit's operating mode (temperatur...e and humidity in the chambers, the use of special functions, malfunctions and emergencies, etc.) and, if necessary, change its settings.

— Child lock. Various features to keep your refrigerator safe from small children. Often, it means blocking the control panel — so that a curious baby cannot change the settings.

— Display. Refrigerators of any level can be equipped with displays — from the simplest to the most advanced. Anyway, the screen provides additional convenience in operation: it can display various detailed information about the operation of the unit, as well as other useful data (for example, time). But the specific type of display may be different.
— LED display. Usually, they are very simple — they display one colour (maximum two or three basic colours) and a limited set of characters (numbers, individual letters and some special icons). However, such limited functionality is enough even for fairly advanced refrigerators, and LED displays are inexpensive.
— TFT display. These are already the most functional screens — like those used in smartphones, tablets, etc. They are capable to display a huge variety of information and can even be made touch-sensitive. And some units with TFT displays are not just refrigerators at all but multifunctional smart home components. However, such an appliance costs accordingly.

— Door alarm. An alarm system that warns that the refrigerator door is open for a long time (or not closed tightly enough). After some time after opening, such a system gives a signal (usually sound), notifying the user of the need to check the status of the door. It avoids a critical increase in temperature in the refrigerator chamber and damage to the contents. In some models, this system is also complemented by a light indicator that confirms the correct closing of the door — this further reduces the risk of leaving the refrigerator loosely closed.

— Reversible door. The ability to choose from which side the hinges on the refrigerator door will be located and, accordingly, in which direction it will open. It allows you to optimize the space in the kitchen, providing access to the contents of the unit from the most convenient side. Please note that this function is only available for classic design models, including display refrigerators (see “Product type”). In Side-by-Side and French Door refrigerators it makes no sense to provide this feature.

Forced cooling mode, in which the intensity of cooling the refrigeration compartment is significantly increased. It is an analogue of the fast freeze described above, used in the refrigerator compartment. Fast cool is also intended mainly for situations where a lot of foodstuff must be loaded inside at a time — it avoids a critical increase in temperature inside the refrigerator. This mode also needs to be turned on in advance and turned off after a certain time. In some models, the shutdown occurs automatically, but the presence of this feature needs to be specified separately.

The operating temperature of the refrigerator freezer.

The generally accepted standard for freezers is actually -18°C. It allows you to effectively store pre-frozen foods, as well as freeze them (with certain precautions). At the same time, for most modern refrigerators, lower temperatures are claimed — at -24 °C, and in some models even lower. However, such indicators are not always standard — in many units, they are achieved only in the fast freeze mode (see "Features"). This should be clarified separately. However, the temperature of the freezer below -18 °C means good freezing features.

In turn, chambers with more modest minimum temperatures — -12 °C, or even -6 °C — are only suitable for storing pre-frozen products; they are not suitable for freezing any significant amount of contents. However, there are very few refrigerators with such indicators on the market — mostly low-cost or outdated models.

To indicate the temperature of the freezer, markings in the form of asterisks (snowflakes) are often used, each of which means a decrease in temperature by 6 °C. For example, in models at -24 °C, you can find the designation * (***) — four asterisks, one of which is highlighted. This usually means that in the standard mode the freezer operates at -18 °C (three stars), and at another 6 °C (down to -24 °C) the temperature drops during fast freezing.

The type of controls for refrigerators is indicated primarily by the type of control panel. Often its location is also taken into account. According to these criteria, nowadays, the following options are distinguished: rotary knobs, internal push-buttons, external push-buttons, internal touch controls and external touch controls. Here are the features of each of these options:

— Rotary knobs. Control using rotary knobs. Such knobs are traditionally installed inside the refrigerator, so in this case, the location is not specified. In general, this is the simplest and most inexpensive option used in units of the appropriate level. Most often, there is only one rotary knob; it is directly connected to the thermostat and regulates only the temperature inside the refrigerator (and even then very approximately). However, even this is often quite enough — especially if the refrigerator is operated in more or less constant temperature conditions (for example, in a home or office kitchen). In many cases, the matter is limited to choosing a more or less suitable knob position once and then not touching the settings at all. In addition, the unambiguous advantages of this type of control are reliability and ease of repair.

— Internal push-buttons. Push-buttons are generally considered more advanced th...an rotary knobs. The specific functionality of refrigerators with such control may be different, but among them, models with additional functions and the ability to fine-tune the temperature (and sometimes even humidity) are noticeably more common. As for the interior layout, it allows you to hide the panel behind the refrigerator door, providing a neat appearance with a minimum of protruding parts. And if the door has a child lock, in this case, it also performs the function of protecting against children. However, to access the controls you have to open the refrigerator — but this moment is generally not critical: such access is not needed so often, and changing settings does not take much time.

— External push-buttons. Like the internal push-buttons (see above), such controls are typical mainly for fairly advanced models (although exceptions are possible). And the external location is convenient because you do not need to open the door to access the settings. On the other hand, the real need for such an arrangement is not so often, and push-buttons must also fit into the overall design of the unit (which is not always possible to do in the best way). As a result, the external version of push-button controls is much less common than the internal one.

— Internal touch controls. Internal touch controls are considered the next step in the development of controls, after buttons. So, they look stylish and technologically advanced, they do not need to be pressed hard (just touched), and there are no protruding parts, corners and cracks on the surface of the panel, which simplifies cleaning from dirt. Accordingly, the presence of touch controls is typical mainly for refrigerators of the middle and top levels. It costs a little more than a push-button one, but this is imperceptible against the background of the total price of the units. But specifically, the internal location is much less common than the external one. It is because there is no need to hide the touch sensors behind the door — they can be easily fit into the external design of the refrigerator.

— External touch controls. The general features of touch controls are described above. And external touch panels in refrigerators are used much more often than internal ones: such panels can be given almost any appearance, optimally fitting them into the design of the refrigerator. Besides, placing them outside allows you not to open the door again to access the settings.

The climate class to which the refrigerator corresponds.

As the name implies, this parameter describes the environmental conditions for which the unit is designed. The warmer it is around — the more powerful the refrigerator should be and the better thermal insulation it should have. Specific classes are indicated by letters, here are the most popular options:

— SN (subnormal). Models for a temperate cool climate, have an operating range from +10 °C to + 32 °C. Such a unit can be useful in a poorly heated room where the temperature can drop below +16 °C — for example, on the veranda of a private house, in a garage, etc.

— N (normal). Refrigerators for temperate climates, with an operating temperature range of +16...+32 °C. Such a unit is suitable for most residential apartments and houses in mid-latitudes.

— ST (subtropical). Models for subtropical and humid tropical climates. Normally work at the range of external temperatures +18...+38 °C.

— T (tropical). Refrigerators for dry tropical climates. Designed for temperature range +18 °С to +43 °С.

There are many models on the market with an extended temperature range covering several classes. For example, a unit labelled N-ST will have a temperature range of +16...+38 °C. Such refrigerators are indispensable in complicated...climates, the conditions of which are not covered by one standard class — for example, during cold winters and hot summers.