Comparison Casio CTK-3500 vs Casio CTK-3200

Ability to change the sensitivity of active mechanics (see above) in the synthesizer.

This function allows you to adjust the intensity of the key's response to pressing. Simply put, the higher the sensitivity, the louder and sharper the sound will be, with the same pressing force. This allows you to change the characteristics of the instrument's sound.

Also in synthesizers with this function, it is often possible to completely turn off the active mechanics and play on a “passive” keyboard. This can be useful for making certain voices, such as harpsichord or organ, sound realistic.

— Unweighted. Keys with a very low pressing force, literally "failing" under the fingers. This option is well suited for inexpensive synthesizers with passive mechanics (see above), but is rarely used in active models — a small resistance force makes it difficult to choose the optimal pressing force.

— Semi- weighted. Medium-strength keys, not up to the hardness of a full-fledged piano, but showing noticeably more resistance than unweighted ones. This variant is most popular among instruments with active mechanics (see above) — the force on the keys provides adequate feedback and at the same time playing such an instrument does not cause any special difficulties even for those who previously dealt only with unweighted keyboards.

— Weighted. Keys with high actuation force, comparable to that of a classical piano. Used only in professional hammer action instruments (see above) — high rigidity is a must for such mechanics (more precisely, for the response that it must provide).

The number of auto accompaniment styles (see above) originally provided in the synthesizer, in other words, the number of accompaniment options available to the user.

The more extensive this set, the higher the probability of finding among these melodies suitable options for a particular case. At the same time, the abundance of styles in itself is not yet a 100% guarantee that among them there will be a suitable one, especially since different synthesizer models can differ markedly in a specific set of melodies. So the list does not hurt to clarify before buying. Also note that the situation can be corrected by user styles (see below) — many synthesizers with auto accompaniment support them.

The range in which you can change the tempo of the programme played by the synthesizer — auto accompaniment, lesson tune (see above), metronome (see below), recorded sample, etc.

Pace is measured in beats per minute. Changing it allows you to adjust the speed of the synthesizer to the specifics of the situation — for example, slightly slow down the tutorial if it is too hard to master at the initial pace. The wider the range of tempo adjustment, the more options the musician has to choose from, especially in the area of very slow and very fast tempos.

Note that the traditional range of musical tempos covers values from 40 beats / min (“grave”, “very slowly”) to 208 beats / min (“prestissimo”, “very fast”), however, in synthesizers it can be more extensive — for example, 30 – 255 bpm.

Synthesizer support for sampling.

Samples are short sound fragments used in the creation of musical compositions. Such a fragment can contain almost any sound — from a note on a musical instrument or a fragment of a drum part to a siren signal, a bird's chirp, the sound of a mechanism, etc. Specifically, the sampling function implies the ability to use the synthesizer to record samples for further use. Recording can be done either through the built-in microphone or through the audio input (from an external microphone or other audio device). At the same time, many synthesizers with this function are able not only to keep the sound not only "as is", but also to pass the incoming signal through the processing circuits, adding various effects to it — echo, "wah-wah", metallic sound coloring, etc. And ready-made samples can usually be "bound" to individual synthesizer keys and played back in real time. Other functions are possible, depending on the level of the instrument.

The ability to overlay different timbres of the synthesizer sound on top of each other. This creates the effect of the sound of two (or even more) instruments at once — for example, piano and violin. At the same time, in advanced models, it may be possible to set different settings for different timbres so that the sameness of the extracted notes is not so noticeable — for example, the same "violin" can be set to smooth transitions between notes, while on the "piano" they will sound jerky.

Possibility of dividing the keyboard of the synthesizer into two parts, each of which is responsible for its own timbre of sound. Thus, on one keyboard, you can play two "instruments" at once in real time — for example, accompany the solo part of the violin with chords of a string orchestra. At the same time, unlike auto accompaniment (see above), all notes are taken by the musician himself, without relying on the automatic settings prescribed in the programme.

Usually, several “split keyboard” combinations are pre-written in the synthesizer’s memory, however, some models allow you to separately select a timbre for each half, at the discretion of the musician.

The presence of a pitch controller(Pitch Bend) in the design of the synthesizer.

This function allows you to smoothly change the pitch by a small amount. In this way, specific playing techniques on some instruments are imitated — for example, tightening the strings on a guitar, which gives a characteristic, “floating” sound in frequency. The pitch control usually has the form of a wheel or lever.

Additional items supplied with the synthesizer in addition to the instrument itself.

— Music stand. A stand for musical notations, installed in such a way that the materials on it are constantly in front of the musician's eyes. In modern synthesizers, the music stand can be built-in or removable.

— Pedal. An additional control in the form of a pedal, which can be responsible for a wide variety of functions, depending on the model of the synthesizer. For more information about this, see "Connected pedals", here we note that the presence of a pedal in the kit eliminates the need to look for and select it separately.

— Power Supply. Power supply for connecting the synthesizer to the network. The very possibility of working from the outlet is important for most modern synthesizers. Therefore, the absence of a power supply in the kit means either that it is made internal, or that we have a simple and inexpensive model (usually for children, see "Type"), designed mainly for battery operation and not equipped with a PSU or not providing for it at all connections. An external power supply unit is convenient because it can be disconnected when working from autonomous power sources, saving the tool from unnecessary wires.

— Disk. Optical disk (CD or DVD) with various additional materials on the synthesizer. These can be instructions and other documentation, drivers for connecting to a computer, specialized software for editing music on a PC,...etc.

— Rack. Own stand for installing the synthesizer on the floor — usually folding, in the unfolded state resembling the letter X in shape. With such a stand, the musician does not have to look for a free table, window sill or other similar place to place the instrument — there is enough free space on the floor. Racks for synthesizers are also sold separately, but it is often more convenient or even cheaper to buy such a device along with an instrument.

— Microphone. The microphone can be used both for singing and for creating samples based on external sounds. However it is worth noting that usually relatively inexpensive synthesizers for beginner musicians are equipped with microphones — it is more convenient for a professional to independently choose additional equipment (including a microphone) to suit their own needs and preferences, without relying on the choice of the manufacturer. Accordingly, the complete microphones themselves usually have rather modest characteristics.