Comparison DeWALT DCS355N vs AEG OMNI 18C LI-152B KIT1

— Rotary engraver. A tool designed mainly for engraving and using a rotating working head for this. However, engravers can also be used for other types of work — drilling, cutting, grinding, etc. In fact, they are hybrids of drills and grinders with low power and compact dimensions (both the tool itself and the working nozzles).

— Impact engraver. A type of engraving tool in which percussive action is used for processing. Such models have a narrower specialization than the rotary engravers described above; they are practically not used for purposes other than engraving and embossing.

— Renovator. A specific type of hand tool, which is closest in design to grinders. The key difference is the principle of operation: the nozzle of the renovator does not rotate during operation, but vibrates finely at a high frequency. The variety of nozzles themselves is very large, which allows you to perform a wide range of work: grinding, cleaning, cutting, sawing, etc. Most of these models, however, lose out to specialized units like electric saws or electric jigsaws, however, with relatively simple work of a small volume, the renovator may well replace several tools at once. In addition, such tools can be useful in difficult cramped conditions, and the accuracy and accuracy of processing is often higher than when using the same saws.

— Multitool. In accordance...with the name, this variety is the most versatile and diverse in terms of equipment. The design of the multi-tool includes the main unit and several removable heads, by changing which you can turn the tool into a drill, renovator, jigsaw, etc. On the one hand, it is convenient — it is easier to carry one universal unit with you than several specialized ones, despite the fact that the power and performance of such devices can be quite high. Also note that if necessary, additional heads can be purchased separately. On the other hand, the mentioned versatility is rarely required in fact, and the tools themselves are expensive. As a result, it is often easier to purchase individual specialized models than to shell out a "round sum" for a multitool or look for additional interchangeable heads that are not sold everywhere. Therefore, there are relatively few models of this type on the market.

— Electrochisel. A tool designed as an electrical analogue of a conventional chisel used in joinery, carpentry, and woodcarving. In electric chisels, the blade vibrates at a high frequency; due to this, such a tool can be used not only for removing a layer of wood, but also for chiselling, similar to a chisel (and, unlike a conventional chisel, without using a hammer). As working nozzles, scrapers (see "Nozzles") of various shapes and widths are used; in some models, the number of nozzles in the kit can reach one and a half dozen.

Types of interchangeable heads supplied with the multitool(see "Device"). The most common options are:

— Renovator. A renovator is a tool that uses the vibration of a working nozzle to carry out various types of work. For more details, see the relevant paragraph above, in paragraph "Device".

— Drill / screwdriver. Usually, in this case, a universal head is meant, suitable for working both as a drill and as a screwdriver. However, the features of such heads and their suitability for different types of relevant work may be different, so the specifics of the application in each case should be clarified separately.

— Electric jigsaw. Head for sawing plywood, wood, metal and other materials with a blade moving back and forth. By themselves, jigsaws are usually quite versatile, and their suitability for a particular material is primarily associated with the presence of an appropriate file.

— Delta grinding. A specific type of grinder — it uses a triangular nozzle for work, similar in shape to the Greek letter "delta" (hence the name). Like renovators (see above), they work on the principle of vibration of the working nozzle. Such machines are used mainly in specific places where it is impossible to use another tool — for example, on recessed surfaces with corners.

T...his list is not exhaustive — other types of heads may be provided in the kit, in addition to those described above.

The electrical power consumed by the tool during normal operation. Usually, the characteristics indicate the power at the maximum speed / frequency of movements of the working nozzle.

Usually, the higher this indicator, the more intense the tool can act on the material being processed, the better it is suitable for difficult conditions (large volumes of work, hard materials). At the same time, note that high power significantly affects energy consumption; in mains-powered models (see below), this puts strain on the wiring, and in battery-powered models, it requires the use of bulky and heavy batteries and significantly reduces battery life. Yes, and this parameter significantly affects the dimensions, weight and price of the tool itself. Therefore, it is worth choosing a model according to power consumption, taking into account the specifics of the work for which it is planned to be used: for example, it hardly makes sense to purchase a high-performance professional tool for minor repairs around the house or in the country.

Specific recommendations on the optimal power values, depending on the type of tool and the purpose of its use, can be found in special sources.

The speed of rotation of the working nozzle provided by the tool. Some models have a fixed rotation speed, others allow you to adjust it within a certain range (see "Number of speeds").

For different types of tools and types of work, different values of this parameter will be optimal; therefore, it is worth choosing taking into account the tasks that are planned to be solved using the tool (it is best to consult with special sources). We note only a couple of general patterns. So, for engraving on relatively soft and pliable materials (wood, glass, soft metals), high speed is not required, but for hard and difficult to process (steel, precious stones), a high-speed tool is better suited. But when drilling, note that for the same power consumption (see above), more revolutions, usually, means lower torque values. That is, here “high-speed” tools are better suited just for soft materials, and low-speed tools are better suited for hard and heavy materials.

Oscillation angle of the renovator nozzle; indicated both for the actual renovators (see "Device"), and for multi-tools with the appropriate nozzles.

Initially, this parameter is usually measured from the middle position of the nozzle; accordingly, the total amplitude will be 2 times greater — for example, for a model at 1.5 ° it will be 3 °. Note that the standard values of the oscillation angle in renovators are 1.4 – 1.6° and rarely go beyond these limits. In some models, figures of 2.5 ° and even more are given; however, most often this means that the manufacturer did not indicate the deviation from the middle, but the overall amplitude.

In general, this parameter is not critically significant: different models of the tool do not have any particular differences in the angle of oscillation, and other characteristics affect the capabilities of the renovator.

- Reverse. Possibility to change the direction of rotation of the working nozzle of the tool. The use of reverse depends on the type of tool and the type of work for which it is used. For example, when drilling, this function can be useful for releasing a jammed drill. And in screwdrivers (see "Interchangeable heads") a change in the direction of rotation is almost mandatory - otherwise it would be impossible to switch the tool from twisting to loosening and vice versa.

- Speed controller. The ability to smoothly change the speed of movement of the working nozzle (frequency of rotation or vibration). The adjustment itself is used to adjust the tool for different types of materials and work - for different cases, the speed is different. But smooth tuning is good because it allows you to set the required speed as accurately as possible - there are no strictly fixed adjustments in such models, and the operator can choose any option from minimum to maximum. True, a certain skill is required for the effective use of such a tool, but this problem can hardly be called serious even for beginners.

- Maintain momentum. A function that allows you to maintain a constant speed of rotation of the nozzle, regardless of the load on it. Without special adjustment, at a constant engine power, the rotational speed inevitably drops with increasing load and increases with...a decrease. And the revs control system monitors the resistance on the nozzle and, if necessary, changes the power in such a way that the rotation speed remains constant. This has a positive effect both on the quality of work and on the service life of the nozzles and the entire tool.

- Soft start. The moment of starting is one of the most difficult in the operation of any electric motor. When the power is connected directly, in the first moments after the start, a high power flows through the windings, which leads to voltage surges in the network; in addition, the beginning of the movement occurs very abruptly, and this is fraught with jerks of the instrument, with the risk of releasing it from the hands with corresponding unpleasant consequences. The soft start function reduces the described troubles, if not to zero, then to a minimum: special circuits limit the starting power and ensure a soft and safe start of movement.

- Brushless motor. The presence of a brushless (brushless) motor in an electric tool. Such motors are noticeably superior to traditional collector motors in terms of efficiency, which makes it possible to significantly reduce energy consumption without sacrificing power; this is especially important for cordless tools (see "Power Source"), where this feature is predominantly found. In addition, brushless motors are less noisy and generate virtually no sparks during operation, making them ideal for working in high fire hazard environments. Their main disadvantages are traditional - the complexity of the design and high price.

— Backlight. The tool has its own lamp to illuminate the place of work. This feature is especially useful when working in low light conditions or in hard-to-reach areas that are otherwise difficult to illuminate. Note that in this case, it is the embedded system that is meant; some models may be equipped with portable lights as separate units, but such lights do not count as lights.

- Display. Own display in the design of the multifunctional tool is designed to visualize customizable parameters, display the battery charge level and display all sorts of related information. The specific implementation of the screen depends on the level of functionality of a specific instrument model.

- Connecting a vacuum cleaner. Possibility of connecting the vacuum cleaner directly to the tool. For this, a special pipe is usually used, one end of which is led to the place of processing, and the actual hose from the vacuum cleaner is connected to the other. Thanks to this, the work becomes much “cleaner”; True, the vacuum cleaner is far from always 100% able to remove sawdust and other waste, but in any case, it at least simplifies subsequent cleaning. The hose nozzle is usually made removable - this allows you to reduce the overall dimensions of the tool in cases where the vacuum cleaner is not needed or is not within reach. Note that before buying a model with this function, you should pay attention to its compatibility with the specific vacuum cleaner that you plan to use.

— Keyless replacement of nozzles. The presence of a clamping tool in the design that allows you to replace working nozzles without using a key. There are many varieties of such clamps, differing in the procedure for use, but they all have one thing in common: the work with the mount is carried out by hand, without the use of keys or other additional devices.

Types of nozzles supplied with the tool.

— Delta platform. Grinding nozzle with a characteristic triangular shape. It is an obligatory element of equipment for tools with the function of a delta grinder (see "Interchangeable heads"), however, it is also often found in renovators (see "Device").

— Segmented disk. A nozzle in the form of an "incomplete" disk — a circle that has no segment. Such a nozzle is only suitable for processing using vibration, and therefore it is found exclusively in tools with a renovator function (see "Device", "Interchangeable heads"). At the same time, the shape of the nozzle allows you to work with both the front and side parts, which gives you freedom of manoeuvre.

— Chaber. A scraper usually means a plate of a rectangular (or close to it) shape. Such a nozzle is one of the most popular in renovators (see "Device", "Replaceable heads") due to its versatility: it is suitable for scraping, cleaning surfaces, cutting, etc. In addition, the scraper is traditionally used as a regular nozzle for electric chisels .

— Saw blade. Specialized nozzle for sawing various materials. Its design and method of operation may vary depending on the specifics of the tool: for example, in electric jigsaws (see "Replaceable heads") the saw blade is designed to move back and forth and looks...like a characteristic strip, in renovators it looks like a narrow plate, etc. .

— For stitching seams. Nozzle for processing joints between tiles, bricks, etc. to give them a neat appearance. It is worth considering that the shape of the jointing can be different (convex or recessed, straight or rounded, etc.), respectively, and nozzles for such work can have a different shape; specific features should be specified separately for each instrument model.

- Sheets for grinding. Sheets for grinding and polishing stone, wood or metal products on a special plate with fastening to the executive body of a multifunctional tool. They often have a triangular shape; sandpaper or diamond coating is used as the material for their working surface.

Note that these are far from all types of nozzles that modern universal tools can be equipped with, but only the most popular ones. In addition to them, other devices may be included in the kit — for example, a variety of sanding sheets. And the “set of nozzles” option is indicated for tools (mainly engravers, see “Device”), the equipment of which includes several dozen devices; in some models, this number may exceed one and a half hundred.

The number of batteries supplied with the respective tool (see "Power Source"). Also, this item may indicate the presence of a built-in battery.

The most popular configuration option with a battery in our time is 2 batteries. This provides additional benefits, which are especially convenient for long continuous use of the tool. So, when the charge of one battery is exhausted, you can quickly change it to another; while one battery is in use, the other can be charged. This minimizes or eliminates interruptions in charging. Single battery kits are not particularly common: they are mainly entry-level tools designed for small amounts of work, when charging breaks are quite acceptable.

In addition, quite a few modern cordless tools come without batteries. This configuration assumes that the customer himself will purchase batteries at his discretion (many models are compatible with several brands of batteries at once). In addition, this option may come in handy in case the battery is already on the farm. This happens quite often, since many well-known manufacturers use universal batteries suitable for different types of branded power tools. So a battery, for example, from a previously purchased electric jigsaw or grinder may well be compatible with an engraver, a renovator of the same company.

As for non-removable batteries, this is a rather rare...and specific option. Such tools turn out to be as compact as possible, but the batteries themselves cannot be quickly changed - so you will inevitably have to take breaks for charging during work. Therefore, this method of supply is typical for low-power instruments. In them, small size is more important than a long period of continuous operation, in addition, a low capacity allows you to achieve good autonomy even with small sizes (and, accordingly, capacity) of batteries.

The name of the battery platform supported by the device. A single battery platform is used to combine various power tools of the same brand into one line (renovator, engraver, screwdriver, grinder, circular saw, etc.). Devices on the same platform use interchangeable batteries and chargers. Thanks to this, for example, there is no need to select a battery for each individual model of a power tool, because one purchased as a spare battery can be used in various power tools, depending on the situation or as needed. Batteries of the same platform basically differ from each other except perhaps in capacity.