USA
Catalog   /   Sound & Hi-Fi   /   Hi-Fi & Hi-End Components   /   AV Receivers

Comparison Yamaha RX-A1060 vs Yamaha RX-A1050

Add to comparison
Yamaha RX-A1060
Yamaha RX-A1050
Yamaha RX-A1060Yamaha RX-A1050
from $1,508.64 up to $1,905.00
Outdated Product
from $1,346.59 up to $1,706.88
Outdated Product
TOP sellers
Device typeAV ReceiverAV Receiver
CPU
DAC frequency192 kHz192 kHz
Audio DAC24 bit24 bit
Auto sound calibration
Auto level
Surround sound in headphones
Ultra HD4K4K
UpscalingUltra HD (4K)Ultra HD (4K)
3D
Multi Zone
Tech specs
Number of channels7.27.2
Power per channel
120 W /6 Ohm/
120 W /6 Ohm/
Signal to noise ratio
110 dB /95 дБ — Phono/
110 dB /95 дБ — Phono/
Acceptable acoustic impedance4 Ohm4 Ohm
Frequency range
10 – 100000 Hz /- 3 дБ/
10 – 100000 Hz /- 3 дБ/
Bi/Tri-amping
Media player and tuner
Tuner and playback
AM/FM radio
USB drive
network streaming audio
internet radio
AM/FM radio
USB drive
network streaming audio
internet radio
Playable formatsFLAC, DSD, AIF, WAV, ALAC, MP3, MPEG-AAC, WMAFLAC, DSD, AIF, WAV, ALAC, MP3, MPEG-AAC, WMA
Communications (interface)
Interfaces
AirPlay
Wi-Fi
Bluetooth
LAN
RS-232
DLNA
Remote control negotiation /via HDMI/
AirPlay
Wi-Fi
Bluetooth
LAN
RS-232
DLNA
Remote control negotiation /via HDMI/
Decoder support
Decoders
Dolby Atmos
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
 
 
Dolby Digital EX
DTS
DTS Express
DTS 96/24
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS ES Matrix 6.1
DTS ES Discrete 6.1
DTS Neo:6
DTS X
Dolby Atmos
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Digital EX
DTS
DTS Express
DTS 96/24
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS ES Matrix 6.1
DTS ES Discrete 6.1
DTS Neo:6
DTS X
Inputs
RCA8 pairs8 pairs
Coaxial S/P-DIF3 шт3 шт
Optical3 шт3 шт
HDMI8 шт8 шт
Composite5 шт5 шт
Component3 шт3 шт
Phono
Control input (IR)
Outputs
RCA1 pairs1 pairs
HDMI2 шт2 шт
Composite1 шт1 шт
Component1 шт1 шт
On headphones6.35 mm (Jack)6.35 mm (Jack)
Preamplifier (Pre-Amp)
 /7.2/
 /7.2/
Control output (IR)
Trigger output2 шт2 шт
Front panel
Headphone output
USB port
HDMI input
Linear
 /pair RCA/
 /pair RCA/
Composite
General
Power consumption420 W420 W
Standby consumption0.1 W0.1 W
Smartphone control
Dimensions (WxDxH)
435x439x182 mm /435x439x247 mm — with antenna/
435x439x182 mm /435x439x247 mm — with antenna/
Weight14.9 kg14.9 kg
Color
Added to E-Catalogseptember 2016september 2016

Decoders

A decoder can be broadly described as a standard in which digital audio (often multi-channel) is recorded. For normal playback of such sound, it is necessary that the corresponding decoder is supported by the device. The first signs of multi-channel decoding were Dolby Digital and DTS, gradually improving and introducing new features. The final stage for 2020 is Dolby Atmos and DTS X decoders. And the intermediate ones were Dolby TrueHD, Dolby Pro Logic II, DTS-HD, DTS ES, DTS Neural: X, DTS Neo (6, X).

Dolby Atmos. A decoder that does not use a rigid distribution of sound across channels, but the processing of audio objects, due to which it can be used with almost any number of channels on a reproducing system — the sound will be divided between channels so that each audio object is heard as close as possible to its proper place. When using Dolby Atmos, in-ceiling speakers (or speakers facing the ceiling) are highly desirable. However, in extreme cases, you can do without them.

— DTS X . An analogue of the Dolby Atmos described above, when the sound is distributed not through individual channels, but through audio objects. The...digital signal contains information about where (according to the director's intention) the object audible to the user should be and how it should move, and the processor of the reproducing device processes this information and determines exactly how the sound should be distributed over the available channels in order to achieve the required localization. Thanks to this, DTS X is not tied to a specific number of audio channels — there can be as many as you like, the system will automatically divide the sound into them, achieving the desired sound. Also note that this decoder allows you to separately adjust the volume of dialogues.

IMAX Enhanced. The IMAX Enhanced Mark of Conformity is awarded to equipment that meets the audio certification requirements of IMAX Corporation. Combined with DTS audio technology to deliver signature IMAX theater-like sound in the home. The most accurate reproduction of such audio is possible in systems with a large number of channels (5.1 or more). Note that for a fully immersive experience, IMAX Enhanced certification must also apply to video equipment for playing content (TV, projector, etc.).
Yamaha RX-A1060 often compared
Yamaha RX-A1050 often compared