USA
Catalog   /   Tools & Gardening   /   Garden Power Tools   /   Garden Shredders

Comparison VIKING GE 140 L vs VIKING GE 355

Add to comparison
VIKING GE 140 L
VIKING GE 355
VIKING GE 140 LVIKING GE 355
from $346.76
Outdated Product
from $509.96
Outdated Product
TOP sellers
Shreddingbranches onlybranches and leaves
Motor typeelectric (mains)electric (mains)
Voltage230 V230 V
Specs
Shredding systemroller
blade /Multi-Cut 355/
Max. shredded material diameter40 mm35 mm
Shredder speed40 rpm2800 rpm
Collector typehardno
Waste container capacity60 L
Full container indicator
Features
automatic feed
 
automatic feed
reverse system
Motor power2500 W2500 W
Overload protection
General
Noise level85 dB100 dB
Transporting wheels
Materialplasticplastic
Dimensions64х49х96 cm141х52х89 cm
Weight23 kg30 kg
Added to E-Catalogjuly 2015november 2014

Shredding

Type of materials for which the shredder was originally designed.

Leaves only. In this case, we mean shredders designed for all types of “soft” and wet garden waste: leaves themselves, thick stems of herbaceous plants, freshly cut branches of small thickness, etc. Typically, these models use a knife or line chopping system (see below). Many units for this purpose can cope with coarser dry waste, but this mode of operation is still not recommended, because. it increases the wear of cutting elements, leading to rapid blunting and failure.

Branches only. Shredders designed to work with coarse materials — primarily large dry branches with a thickness of several tens of millimetres (for more details, see "Maximum diameter of shredded material"). Usually, roller chopping systems are used for such work (see below). Aggregates of this type without much difficulty "eat" and medium-sized soft debris, however, the quality of its processing is much lower than in specialized models for leaves. Therefore, it hardly makes sense to use this type of shredders for "non-native" material.

Branches and leaves. Models that process both types of garbage described above with equal efficiency — both soft (leaves, freshly cut thin branches) and hard (dry thick branches). Some models have separate modes of operation for both, while others have separate holes for hard...and soft materials (see Features). Anyway, such shredders are the most versatile, however, their cost is higher than that of specialized ones.

Shredding system

The design of the tool used to grind the garbage entering the unit.

Knife. The main element of such systems, as the name implies, are special knives. Their design can be different: triangular blades with sharpening, rotating discs with several blades, etc. Anyway, this option is considered optimal for working with leaves, because. it ensures thorough and uniform processing of such waste. But with solid large branches, knife systems are less compatible; see "Crushing" for details.

Valkovaya. Also, such systems are called milling. Their action is based on the use of gears with large teeth, which, when rotated, “bite off” and crush pieces of the processed material. This allows you to effectively process thick dry branches, besides, the gears themselves draw the debris inside, in fact, providing automatic feeding (see below). But roll systems do not work well with leaves and other “soft” debris. Therefore, models of this design are usually intended purely for branches (see "Chipping").

Turbine. Turbine systems use a cutting element in the form of a cylindrical or conical drum with blades located horizontally. Their design is such that the shredder is able to cope equally effectively with both leaves and thick branches (see "Chipping"). The main disadvantage of "turbines" is the high cost.

— Leskovaya. As the name implies, systems of t...his type use a fishing line that rotates at high speed during operation. They are designed to work exclusively with leaves (see "Crushing"), and it is the leaves that the scaffold unit processes in the best quality. But with other types of garbage — even with thick grassy stems — such shredders can have problems.

Max. shredded material diameter

The largest thickness of debris that the shredder can handle normally. This parameter will allow you to evaluate how a particular device is suitable for a particular situation.

Note that the maximum diameter of the crushed material is important for models that allow working with branches (see "Chipping"). But in specialized aggregates for leaves, it is usually not indicated at all: the thickness of the garbage processed in such grinders is, by definition, small, and creating a design that works normally with any “soft” materials is usually not a problem.

Shredder speed

The speed of rotation of the cutting tool of the chopper (see "Crushing system"). Variable speed models (see below) usually have a maximum RPM value.

In general, the general pattern is as follows: with equal engine power, the higher the speed, the lower the torque (see below), and vice versa. In addition, high speed improves performance (see "Bandwidth"). At the same time, this parameter in most cases is more of a reference value than a practically significant one: manufacturers select the rotation speed in such a way that it provides the claimed throughput and at the same time maintains the torque at a sufficient level for efficient processing of materials that were originally calculated design. Therefore, in some models, revolutions may not be indicated at all, and when choosing, it is worth focus on moments that are closer to practice.

Collector type

The type of container for the collection of processed mass, provided in the design or delivery set of the grinder.

— Hard. Capacity in the form of a rigid container. Such collectors are very reliable, they carry any kind of debris without any problems — from soft crushed leaves to sharp hard pieces of wood that could pierce soft tissue; in addition, they are more convenient to unload than soft bags. On the other hand, hard boxes are bulky and take up quite a lot of space; in some models, this drawback can be partially compensated by various technical solutions (for example, using a container as a transport case for the upper part of the unit), but this does not change the essence of the problem.

— Soft. Capacity in the form of a soft bag, fabric or polymer. Such collections are extremely convenient in storage and transportation — a rolled bag takes up very little space, moreover, it is usually lighter than a rigid container of the same capacity. On the other hand, soft containers tolerate contact with large sharp particles worse, they are less convenient for unloading, and in many cases it is more convenient to use disposable garbage bags instead of reusable bags (see below for more details).

— Is absent. Absence of any collection in the chopper design/set. This option involves the use of external containers — most often, such models are designed for garbage bags, however, some units are more convenient to use with hard boxes, buckets, etc. On th...e one hand, the absence of a collection implies additional efforts to find it; on the other hand, finding a suitable capacity is usually not a problem, moreover, the user can choose it himself, depending on the specifics of the situation. For example, for recycled leaves, you can take an inexpensive garbage bag, and for wood chips left after thick branches, a box made of solid material is better; for large volumes of work, collections of the corresponding volume are usually required; if the crushed material is intended for export, you can immediately pour it into packaging for transportation (for example, bags), etc.

Waste container capacity

The capacity of the garbage collector provided in the design or delivery set of the grinder.

The larger the container, the more recycled material the collector can hold and the less often it will have to be emptied. On the other hand, it is not always convenient to carry a large amount of material, and a large container takes up a lot of space — and if for soft bags (see "Type of collection") the latter is relevant only when fully loaded, then rigid containers are bulky by definition. Therefore, when choosing, you should proceed from the optimal compromise between capacity and convenience.

Full container indicator

The presence in the design of the grinder pointer, allowing you to monitor the degree of fullness of the garbage bin.

This function in our catalog is indicated for all models, the design of which somehow provides the ability to determine the level of filling of the collection without opening it. The simplest "indicator" options are narrow slots in the top of the container (through which the user can see that the contents have risen almost to the level of the edges) or translucent wall material. There are more advanced options — for example, a sensor with a light alarm. However, anyway, the indicator makes it easier to keep track of the amount of content in the collection, reducing the risk of overflow and related troubles. It is found only in models with rigid containers (see "Type of collector") — in soft bags, you can monitor the fullness without any indicator, and in the absence of a standard collector, this feature depends on the container selected by the user, and not on the capabilities of the chopper.

Features

Auto feed. Autofeed refers to all systems that somehow ensure the "pulling" of debris into the working mechanism of the unit. Roller chopping systems (see above) by definition have this feature; in other types of shredders, additional mechanisms may be provided specifically for automatic feeding.

Pusher. The presence of a pusher in the design or delivery set of the unit. The pusher is a device that allows you to manually push the garbage to the working mechanism of the grinder; such devices are specially adapted to the shape and design of the receiving chamber, therefore, when used, they are more efficient and at the same time safer than various improvised means. The pusher can be useful both in the absence of automatic feed and in its presence (see above): it happens that debris gets stuck “on the way” to the tightening mechanism, which requires additional measures from the operator.

Dual chamber receiver. The presence in the design of the chopper of the receiver, which has two separate chambers. Each of these chambers is designed for its own type of garbage; at the same time, the chopper itself can be both universal and specialized, for branches (see "Chopping"). In the first case, different chambers are designed for different types of debris, in the second — for branches of different thicknesses. Anyway, the dual-chamber receiver simplifies the wo...rk with the universal unit — it reduces the risk of confusing modes for different materials.

— Funnel for foliage. The presence of a special funnel for collecting foliage in the chopper design. Such a funnel usually has the form of a characteristic wide bell, mounted on a swivel mount and laid on the ground during use. In such a socket, as in a scoop, you can sweep the leaves collected with a rake or broom — it's easier and faster than loading them into the chopper with your hands.

— Reverse system. The presence of a reverse function in the chopper design. This function allows you to run the working nozzle in the opposite direction, and its use may vary depending on the chopper model. So, in models with roller shredding systems (see above), the reverse allows you to “spit out” a branch that is too thick or hard and release the jammed mechanism, and in some universal devices (see “Chipping”), by switching the direction, you can choose between modes for different types of debris .

Overload protection

Availability of protection against an overload in a design of a grinder.

Overload is a critical increase in the load on the working mechanism and, accordingly, the engine of the device. Such a situation may arise, for example, when too large or solid debris (or too many “regular” materials) enters the unit; at best, its consequences are limited to increased wear, at worst, an accident can occur. The protection system prevents such troubles by shutting down the motor (or the drive to the grinding system) in the event of an overload. Of course, you can also turn off the unit manually — however, automation is more reliable, since it constantly monitors the status of the device and reacts almost instantly.
VIKING GE 140 L often compared
VIKING GE 355 often compared