Comparison Soocas X3 vs Oral-B Professional Care 1000 D20

Types of nozzles supplied as standard with the device.

The availability of nozzle types largely depends on the device's intended purpose (as discussed in the "Type" section). Toothbrushes typically offer standard round and oval-shaped nozzles, as well as options for sensitive teeth (also available in both round and oval shapes), and combined devices that may have multiple functions. In contrast, irrigators can come with various nozzles, including conventional ones, those designed for cleaning gum pockets (periodontal), and even nozzles for nasal irrigation. Devices intended for use with braces, implants and tongue cleaning are primarily found in irrigators, although they may also be compatible with some toothbrushes.

Here is a more detailed description of each of these options:

— Oval standard. Oval-shaped toothbrush heads are designed for standard cleaning intensity and are not specifically intended for sensitive teeth. The performance of these nozzles depends on the cleaning technology they employ (as explained below). For instance, models using reciprocating sweeping patt...erns offer more intensive treatment compared to similar round heads with reciprocating technology. However, this type of cleaning is less gentle and requires precision even for individuals with healthy teeth and gums. In the case of sonic and ultrasonic brushes, there is no significant difference, and oval-shaped heads are widely used because they cover a larger surface area, allowing for quicker toothbrushing. Occasionally, you may come across oval nozzles with a reciprocating-rotating mechanism, which, in terms of shape and application, are closer to round heads.

— Round standard. Round toothbrush heads are designed for standard cleaning and are not specifically intended for sensitive teeth. They are primarily used in models featuring reciprocating cleaning technology (as explained below). In comparison to their closest alternative, oval-shaped reciprocating-sweeping heads (as described earlier), round nozzles offer a gentler cleaning action and better access to hard-to-reach areas. They may not perform as well in cleaning open spaces, but this is typically not a critical issue. However, in "sonic" brushes, round heads are quite rare. In such cases, round heads do not offer significant advantages over oval ones, and their coverage area is noticeably smaller, which can reduce their overall effectiveness.

— Oval for sensitive teeth. A variation of the oval heads described above, optimized for the cleaning of sensitive teeth and gums (including inflammation in the oral cavity). Such devices are distinguished primarily by softer bristles than in standard nozzles; in addition, other design features may be provided to ensure the most delicate and gentle impact.

— Round for sensitive teeth. Round heads specially designed for sensitive teeth and gums. For round nozzles in general, see above; and the main difference of this variety is a softer bristle, which allows you to achieve the necessary accuracy and care during processing. In addition, the design may provide other solutions that eliminate discomfort when used with sensitive teeth or inflamed gums.

— Combined. A head that combines round and elongated (like an oval) sections. Allows you to combine the advantages of both options to some extent. Note that such heads are rarely used as regular ones, in most cases they are produced as interchangeable accessories.

— Standard for an irrigator. Classic irrigator heads designed mainly for cleaning healthy teeth and gums. The working part of such a head has the form of a nozzle of small diameter, and almost all modern irrigators and flossing systems are equipped with similar devices (see "Type"). Often, several standard heads are supplied in the kit at once — this allows several users to use one device at once without worrying about hygiene.

– Orthodontic (for braces). Specialized heads for removing plaque and dirt in hard-to-reach places under braces and other orthodontic structures. For this purpose, you can use a standard head, however, such devices more effectively cope with such tasks. Most often they come with irrigators and flossing systems, but they are also found in toothbrushes.

– Periodontal (cleaning pockets). Gum pocket cleaning heads are designed for cleaning the areas where the gums make contact with the teeth, known as "gingival pockets." These devices feature thin heads made from soft materials to provide gentle and precise cleaning. They are particularly effective for individuals with inflamed gums and certain other oral conditions, but they can also be beneficial for users with entirely healthy gums.

— For implants. Heads designed for cleaning implants, crowns, bridges, and similar dental structures serve a similar purpose as braces heads, focusing on effectively cleaning hard-to-reach areas. These heads may be included with toothbrushes, although they are more commonly found in the accessory sets of irrigators.

— Tongue cleaning. Special heads designed for cleaning the tongue and inner surface of the cheeks help maintain overall oral hygiene and combat bad breath by removing foreign plaque. In irrigators, these nozzles typically feature a spatula-like shape that scrapes away plaque, which is then washed away by a stream of water. Toothbrushes designed for tongue cleaning use a head with a specialized surface that replaces traditional bristles with low-height solid protrusions, typically less than a millimeter in height. These protrusions effectively clean the tongue, primarily focusing on this area.

— Nasal cleaning. An irrigator equipped with a head for nose washing serves multiple purposes, including the treatment of conditions like a runny nose or sinusitis, as well as general nasal hygiene and prevention. The head for this purpose includes a unique "plug" that securely seals one nostril to prevent liquid from flowing back. The nose washing procedure is typically performed with the head in a sideways position. Water or saline solution is gently introduced into one nostril, which is positioned higher, and flows out through the other nostril. The head is then turned to the opposite side, and the process is repeated. It's important to note that while this procedure is generally safe, there are specific contraindications, so consulting with an ear, nose, and throat (ENT) doctor before using an irrigator in this capacity is advisable.

Apart from the mentioned nozzles, modern toothbrushes and irrigators may come with various other types of attachments. Toothbrushes might include attachments for tartar removal, flossing heads with ultra-thin bristles that mimic dental floss, or specialized gum massage heads. Irrigators may offer specialized nozzles for intensive or gentle treatment, multi-jet nozzles and more.

Models of replacement heads supplied with the device.

This information is valuable for assessing the capabilities of a specific model and for sourcing additional, spare, or replacement nozzles, particularly for toothbrushes and dental centers that naturally use such devices (as indicated in "Type"). Firstly, it's advisable to replace the heads in these devices every 3-6 months, similar to regular toothbrushes. Secondly, if each user purchases their own nozzle while sharing a single handle, it's a cost-effective alternative to buying a separate brush for each individual, although it may be less convenient. Regardless, knowing the model of the interchangeable nozzle will save you time and effort when searching for compatible accessories.

The number of operating modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

The mode in this case means the general format of operation, as explained in more detail in the "Modes" section below. It's important not to confuse this parameter with the number of power settings, which are discussed separately in the "Power modes" section. These characteristics are generally distinct from each other. For instance, a toothbrush with one operating mode may have multiple power settings, and conversely, there can be just one power level with several operating formats.

Anyway, the presence of several modes significantly expands the functionality of the brush/irrigator, allowing the device to be used for different procedures (or for several users with different needs in terms of oral hygiene). The flip side of this versatility is the increased cost. In addition, note that with the same number of modes, a specific set of these modes in different models may be different; so before buying, be sure to clarify how the capabilities of the selected model meet your requirements.

Modes of operation supported by the device.

Toothbrushes nowadays offer a wide range of modes beyond the traditional daily cleaning (often referred to as "2D" mode). You can find toothbrushes with options like the advanced 3D mode, as well as programs for gentle and deep cleaning, polishing, whitening, gum massage and tongue cleaning. On the other hand, irrigators typically offer different modes in addition to the standard continuous water jet. These additional modes often include pulsation and spray options.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The "2D" mode of operation in toothbrushes closely resembles the traditional manual toothbrush experience. In this mode, the bristles of the brush move in a single plane, and the exact movement pattern may vary depending on the cleaning technology used. The intensity of brushing is typically medium to high, making it suitable for individuals with relatively healthy and not overly sensitive teeth. The recommended daily brushing time is 2 minutes, with 30 seconds allocated to each quadrant of the mouth. These corresponding settings are usually available in the timer function, if the toothbrush is equipped...with one. While "2D" brushing is somewhat less effective than "3D" (as mentioned below), it's a feature that can even be found in more affordable toothbrush models.

— Daily cleaning (3D). This feature, available in brushes with reciprocating-rotating and reciprocating-sweeping technology, involves bristle pulsation in addition to the standard cleaning motion. The pulsating movement, which goes deep into the brush head and back, enables cleaning in three dimensions simultaneously. This greatly enhances efficiency compared to the 2D cleaning mentioned earlier. These bristles not only address the outer tooth surfaces but also reach the sides and interdental spaces to some extent (though it's not a complete replacement for dental floss). However, it's worth noting that this advanced functionality typically comes at a higher cost.

— Gentle cleaning. The gentle treatment program, typically used for sensitive teeth and gums prone to bleeding, is common in brushes with reciprocating-rotating and reciprocating-brushing technologies. In these brushes, the gentle mode often involves reducing the nozzle's rotation or vibration speed. In sonic and ultrasonic models, gentler treatment is achieved by reducing vibration intensity. Regardless of the technology, this mode aims to minimize discomfort during brushing and the risk of gum damage, even when using standard nozzles. For the gentlest effect, it's advisable to use this function with a nozzle designed for sensitive teeth.

— Deep cleaning. Most often, this name means cleaning with a standard intensity, but an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to effectively clean your teeth and remove dirt, for which normal daily brushing is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require a full-length cleaning. Usually, polishing is carried out at a reduced frequency of vibrations (rotations) and takes noticeably less time than conventional processing (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing stains, especially from the front teeth, is often an extended version of the regular brushing mode. For example, in a whitening mode, the brush might operate normally for 2 minutes and then switch to increased intensity for 30 seconds. Specific details about this mode, including any contraindications (especially for individuals with sensitive teeth or gum issues), should be checked separately.

— Massage gums. Gum treatment can be offered either as a separate program or as an add-on to the regular brushing routine. In the latter case, it typically involves a standard 2-minute toothbrushing program followed by activating an additional mode. This function not only ensures effective cleaning but also contributes to gum strengthening. It can be beneficial for addressing issues like inflammation and bleeding gums, although consulting a dentist is advisable in such cases.

— Cleaning the tongue. A separate mode for tongue cleaning is available in many electric toothbrushes. Brushing the tongue with an electric toothbrush can often cause discomfort due to tickling, so this mode typically offers a brief cleaning session lasting about 20 seconds. If needed, you can perform multiple sessions. It's important to note that the presence of a tongue cleaning mode doesn't necessarily mean that a specialized nozzle for tongue cleaning is included in the kit (as discussed in the "Nozzles" section), although it's commonly included.

It should be noted that in some toothbrushes, the mode change is carried out due to “smart” nozzles: when such a nozzle is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate programme.

In turn, in irrigators, the features of the main modes are as follows:

— Jet (monoflow). The classic, most popular working format: a constant jet with a constant pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely simple to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray. In this mode, a mixture of water and air is fed through the nozzle, due to which, instead of the usual jet, a cloud of small droplets flying at high speed is obtained at the exit. This mode is great for massaging the gums and general cleaning of the mouth.

The brushing technology used by the toothbrush (see "Type").

In today's market, toothbrushes mainly feature cleaning technologies such as a href="/list/420/pr-14372/">reciprocating, reciprocating-sweeping, sonic and ultrasonic. The first two options can also include the additional feature of pulsating technology. The main difference between these methods lies in the nature of the movement of the bristles; Here is a more detailed description of each option:

— Reciprocating. This cleaning technology involves the bristles on brushes with round heads moving in a traditional manner. As the name suggests, the head rotates back and forth at a slight angle during operation. This technology is considered somewhat more advanced than reciprocating-sweeping, particularly because it offers improved cleaning in interdental and similar areas. However, it's important to note that brushes with this technology still don't match the efficiency of sonic and ultrasonic brushes but are generally more budget-friendly.

— Reciprocating-sweeping. Historically, this technology was the first to be used in brushes with oval nozzles. In brushes employing this principle, the bristles oscillate from left to right, resembling the motion of a broomstick—hence the name "reciprocating." Classic reciprocating brushes are characterized by a sim...ple design but are not particularly effective. Consequently, there are few such models available today, primarily found in low-cost devices. Most toothbrushes with oval heads now use more advanced sonic or ultrasonic technology.

— Pulsating. Usually, this term refers to the format of operating, in which the bristles move up and down relative to the surface of the nozzle, in other words, they go deep into the head and move back. This technology is rarely used in its pure form, it usually complements a reciprocating or reciprocating sweeping head, providing 3D cleaning capabilities (refer to "Modes"). But if the 3D mode is not claimed in the toothbrush, it is worth clarifying separately what is meant by pulsating technology. So, in some models, we are actually talking about the whitening mode, when, for maximum intensity of exposure, the device does not work constantly, but in separate pulses; in others, the term "pulsating" actually refers to the sonic or ultrasonic mode of operation.

— Sound. Sonic cleaning technology involves bristle vibrations with a small amplitude at a high frequency, reaching up to 40K vibrations per minute — this speed aligns with audible sound frequencies, hence the name "sonic." This cleaning method is considered more advanced than reciprocating and even reciprocating-sweeping technology. Sonic brushes, thanks to their high vibration speed, create a fine, uniform foam by mixing toothpaste, saliva, and air during cleaning. This foam can effectively penetrate hard-to-reach areas, and the vibrations themselves prove highly efficient at removing plaque, including from interdental spaces. While ultrasonic cleaning is considered even more advanced (as discussed below), sonic brushes are generally more affordable.

— Ultrasonic. Ultrasonic cleaning technology represents a further advancement of the sonic technology described earlier, distinguished primarily by a higher oscillation frequency. It's important to note that not all brushes in this category operate in the ultrasonic range; some models have oscillation frequencies that only slightly exceed 40K per minute, which is still within the range of audible sound. However, the operating frequency of such devices is significantly higher than that of standard sound devices. Ultrasonic technology offers several advantages, including thorough cleaning with access to hard-to-reach areas and a bactericidal effect. Ultrasound is capable of destroying bacteria responsible for plaque formation. However, brushes with this technology tend to be somewhat more expensive than their sonic counterparts.
It's important to mention that ultrasound technology is not as effective as conventional sound vibrations for cleaning braces and similar structures. As a result, some devices in this category incorporate both ultrasonic and conventional sound vibrations to ensure thorough cleaning in all situations.

The frequency of working movements of a toothbrush with a reciprocating-rotating or reciprocating-brushing brushing technology (see above). In modern models, this figure can be from 4 – 5 to 40K movements per minute.

The higher the speed of the toorhbrush, the faster and more efficiently it handles with its task. On the other hand, high speed and intensity of processing is not always desirable — for example, with sensitive teeth or weak gums, such a brush can create problems. Therefore, you need to choose a device according to the frequency of rotation, taking into account the characteristics of your teeth; Ideally, you should consult with your dentist first. However, modern toothbrushes may have several modes, including gentle (see "Functions").

This parameter represents the highest pulsation frequency achievable by the device. It's specified for brushes that support pulsating cleaning technology (as explained above), as well as for irrigators equipped with a jet pulsation mode. In the case of flossing systems (as mentioned in the "Type" section), this section typically provides information about the irrigator's pulsation frequency, and details about the toothbrush's pulsation frequency (if applicable) are mentioned separately in a note to this paragraph.

The high frequency of pulsation (40 000/min and more) in toothbrushes provides high efficiency, allowing you to quickly and efficiently deal with dense plaque and even tartar. On the other hand, too intensive processing is also undesirable — for example, with high sensitivity of the teeth. All this is also true for irrigators — except that the operating frequencies in them are noticeably lower, such devices rarely produce more than 2K pulsations per minute.

In view of all this, it does not always make sense to chase the maximum frequency of pulsations — it is worth considering the individual characteristics of the user. And ideally, before choosing a brush or irrigator with pulsation, you should consult a dentist; this will not hurt even with healthy teeth, and even with problems with teeth or gums, it is highly recommended.

The frequency of sound vibrations provided by a brush with a sonic or ultrasonic principle of operation (see "Cleaning technology").

A high oscillation frequency (from 40 000/min and above), ositively impacts the efficiency and quality of oral processing. In fact, brushes that generate more than 40,000 oscillations per minute are often referred to as ultrasonic brushes, although true ultrasound starts at much higher frequencies. However, it's important to note that these high-speed brushes tend to come with a higher price tag. It's also worth mentioning that for specific tasks, such as delicate treatment of sensitive teeth, relatively lower frequencies may be more suitable. Therefore, when choosing an oral care device, it's essential not to prioritize the maximum oscillation frequency but rather consider the individual needs of the user(s). Consulting a dentist for personalized recommendations is a prudent approach.

It's important to clarify that in this context, a full cycle of bristle movement is defined as one complete oscillation, which includes both the forward and backward motion. Some manufacturers employ a marketing tactic where they list their brush's operating frequency not in terms of complete oscillations but as the number of movements per minute, counting only half of the cycle — either the forward or backward motion. This can lead to impressive-sounding numbers in product specifications since the count of...movements is double the count of oscillations. However, the primary performance metric remains the number of complete cycles or oscillations, and that's the value provided in this section of our catalog.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.