Comparison Soocas So White EX3 vs Soocas X3

The number of brush modes provided by the device. The presence of several modes allows using the device for different procedures (for example, daily cleaning, delicate cleaning, whitening, etc.). Each such program has its own features of the working nozzle, as well as its own timer settings. The downside of such multifunctionality is the increased cost. In any case, this feature significantly expands the capabilities of the device; however, the specific set of modes may be different - it would not hurt to clarify it separately.

In this case, the mode means the general format of operation. For more information on the different formats, see "Modes" below. Note that this parameter should not be confused with the number of power settings. The latter is specified separately - see "Power modes", and in general, these characteristics are practically independent of each other. For example, a brush with one mode of operation can have several power settings. And vice versa, there may be only one power level, but several formats of operation.

Operating modes supported by the device.

Nowadays, toothbrushes offer the greatest variety of modes. In addition to traditional (so-called '2D') daily cleaning, they may include a 3D-mode, programs for sensitive and deep cleaning, polishing, whitening, gum massage, and tongue cleaning.

— Daily Cleaning (2D). The operating mode most similar to traditional (manual) toothbrushes. In this mode, the bristles move in a single plane; the trajectory can vary depending on the cleaning technology (see below). The intensity is usually medium/high, making this mode primarily for relatively healthy and not too sensitive teeth. The recommended time for daily cleaning is 2 minutes, 30 seconds for each quadrant of the mouth; relevant settings are typically provided in the timer (if available — see below). Generally, 2D cleaning is somewhat less effective than 3D (see below), but even the cheapest toothbrushes can offer this feature.

— Daily Cleaning (3D). A feature found in brushes with oscillating-rotating and sweeping technology. In these models, in addition to the primary cleaning technology, there is an up-and-down pulsation of bristles (more precisely, into the head and back). This allows cleaning in three planes, consid...erably improving efficiency compared to the 2D cleaning described above: the bristles not only process the outer tooth surface but also somewhat reach the sides and interdental spaces (although it is not a full replacement for using dental floss). The traditional downside of this feature is the relatively high cost.

— Sensitive Cleaning. A program for gentle treatment, mainly used for sensitive teeth and gums prone to bleeding. In brushes with oscillating-rotating and sweeping cleaning technology (see below), the sensitive mode usually involves reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle treatment may be provided by decreasing the amplitude of oscillations. In any case, this mode minimizes discomfort during cleaning and the risk of gum damage — even with standard nozzles; for the most gentle effect, use this function with a sensitive teeth nozzle.

— Deep Cleaning. This name commonly refers to a cleaning with standard intensity, but extended duration — for instance, 3 minutes instead of the usual 2 minutes (45 seconds per quadrant of the mouth instead of the traditional 30 seconds). This mode allows for maximum effective tooth cleaning and removal of deposits insufficiently cleared by regular daily cleaning.

— Polishing. A mode for treating relatively clean teeth that do not require a full cleaning session. Usually, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than regular treatment (e.g., 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for lightening tooth enamel and removing various stains, especially from the front teeth. It may be an extended version of the usual cleaning mode: for example, when whitening is enabled, the brush operates in a regular format for 2 minutes, then at increased intensity for 30 seconds. It's worth checking these specifics separately; also check contraindications for using this mode (especially for sensitive teeth and/or gum issues).

— Gum Massage. Gum treatment may be provided as a completely separate program or as an addition to the normal cleaning mode. This feature not only ensures effective cleaning but also strengthens the gums — useful for treating inflammation and bleeding, though it's best to consult with a doctor beforehand in such cases.

— Tongue Cleaning. A separate mode for cleaning the tongue. For many people, cleaning the tongue with an electric toothbrush causes a tickling sensation that's hard to endure for a long time. Therefore, this mode typically involves a brief duration of continuous treatment — around 20 seconds; several such 'sessions' can be made if necessary. It's also worth noting that having a tongue cleaning mode does not automatically mean a special attachment for such cleaning is included (see 'Attachments'), although such a tool is usually part of the set.

Note that in some toothbrushes, changing modes is done using 'smart' attachments: when such an attachment is installed, the device recognizes it via a built-in chip and automatically switches to the appropriate program.

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The last mode memory allows the device to "remember" which mode was active at the time of shutdown — thus, after switching on, work will continue in the same mode.

This feature is primarily found in toothbrushes (see "Type"), especially relevant due to the various programs available in such devices. However, it's important to consider that the memory of the last mode is convenient when consistently using one mode. If switching between different modes, it can become inconvenient. For instance, if a user starts with a regular cleaning program and then switches to a separate polishing program, the brush will default to polishing mode each time it's turned on, requiring manual adjustment to switch back to cleaning mode. Therefore, before seeking a device with this feature, ensure it aligns with your usage needs.

The ability to synchronize the device with a smartphone, tablet or other similar gadget. It is found mainly in toothbrushes, but can also be used in other types of devices (see "Type").

Synchronization with an external gadget, typically via Bluetooth, requires the installation of a dedicated application. The functionality of this app determines the available features when using the toothbrush with a smartphone or tablet. However, these functions extend well beyond what the toothbrush can do on its own, thanks to the smartphone or tablet's screen capabilities. Common features include displaying a timer countdown and the ability to customize the timer settings if the default values don't meet the user's preferences. The application also typically provides other relevant information, such as the selected brushing program and battery charge status. Some toothbrushes with this feature can even assess the overall effectiveness of each brushing session, process this data within the app (like tracking trends over time), and sometimes transmit this information over the internet, allowing for remote consultations with a dentist.

While in the past, the primary drawback of models offering smartphone synchronization was their high price, nowadays, even low-cost-friendly toothbrushes come with this feature. Additionally, some models go the extra mile by including dedicated smartphone holders for added convenience.

The total weight of the device is an important consideration. In the case of stationary irrigators and dental centers (as mentioned in the "Type" section), weight isn't a significant factor since the main unit is placed on a stand or wall, and you don't have to hold it. In fact, for some of these models, weight may not even be specified. However, when it comes to toothbrushes or portable irrigators, the device's weight becomes a crucial factor. A heavy device can strain your hand and make it challenging to use during teeth brushing or other procedures. It's generally recommended that the weight of a portable device should not exceed 200 g, and lighter is often better. It's worth noting that in models that come with stands (as discussed earlier), the total weight is typically provided, accounting for both the main unit and the stand. The weight of the main unit alone is usually around 1.5 to 2 times less than the total weight.