Comparison DEX DFD-460P vs DEX DFD-465S
Add to comparison |  |  |
|---|---|---|
| DEX DFD-460P | DEX DFD-465S | |
| Outdated Product | Outdated Product | |
| User reviews | ||
| TOP sellers | ||
| Type | dehydrator (horizontal dryer) | dehydrator (horizontal dryer) |
| Drying levels | 6 pcs | 6 pcs |
| Tray size | 305x330 mm | 305x330 mm |
| Power consumption | 500 W | 500 W |
Specs | ||
| Thermostat |  | |
| Pastila tray | 1 pcs | 1 pcs |
| Mesh for herbs and spices | 1 | 1 |
| Temperature range | 35 – 70 °C | 35 – 70 °C |
| Location of the fan (heater) | rear | rear |
| Control | touch controls | touch controls |
| Shutdown timer | | |
| Overheat protection | | |
| Tray material | plastic | stainless steel |
| Dimensions | 315x345x450 mm | 315x345x450 mm |
| Weight | 5.5 kg | |
| Added to E-Catalog | august 2024 | april 2023 |
Compare DEX DFD-460P and DFD-465S
You may be interested in
DEX DFD-465S often compared
Glossary
Tray material
The material from which the complete trays of the dryer are made.
— Plastic. Inexpensive, but at the same time very practical material. In terms of strength and overall reliability, the plastic is inferior to metal, however, during normal use of the dryer, this difference is not noticeable. In addition, if such trays are made in the form of complete compartments, their walls can be made transparent so that you can observe the contents without interrupting the process and without knocking down the temperature regime. However the transparent walls gradually become cloudy due to the low resistance of plastic to scratches — however, it takes a lot of time for this moment to become a serious inconvenience. Thus, most modern dryers use plastic trays.
— Stainless steel. The main advantages of metal trays are strength and resistance to overheating. On the other hand, these advantages rarely turn out to be significant, and steel is more expensive than plastic. In addition, if metal trays are made in the form of separate compartments, they are opaque, and to check the condition of the products, you will have to open these compartments, lowering the temperature and disrupting the process. . For models with a rear fan (see above), this point is not relevant — they usually have a transparent door; however, such devices are not cheap. Thus, this tray material is rare nowadays — mainly among advanced dryers.
— Plastic. Inexpensive, but at the same time very practical material. In terms of strength and overall reliability, the plastic is inferior to metal, however, during normal use of the dryer, this difference is not noticeable. In addition, if such trays are made in the form of complete compartments, their walls can be made transparent so that you can observe the contents without interrupting the process and without knocking down the temperature regime. However the transparent walls gradually become cloudy due to the low resistance of plastic to scratches — however, it takes a lot of time for this moment to become a serious inconvenience. Thus, most modern dryers use plastic trays.
— Stainless steel. The main advantages of metal trays are strength and resistance to overheating. On the other hand, these advantages rarely turn out to be significant, and steel is more expensive than plastic. In addition, if metal trays are made in the form of separate compartments, they are opaque, and to check the condition of the products, you will have to open these compartments, lowering the temperature and disrupting the process. . For models with a rear fan (see above), this point is not relevant — they usually have a transparent door; however, such devices are not cheap. Thus, this tray material is rare nowadays — mainly among advanced dryers.