Comparison Cybex Melio vs Cybex Priam 2 in 1

General design of the pushchair.

In addition to traditional varieties — classic models (with a carrycot) and pushchairs (with a seat) — nowadays you can also find universal pushchairs, which are 2 in 1 and 3 in 1, transformers and pushchairs for sports purposes. Here is a more detailed description of each variety:

— Pushchairs. Pushchairs designed for the sitting position of the kid. The seat for the baby in such pushchairs is called a seat unit; in fact, it is a seat of a special design. In some models, this seat can tilt almost horizontally, which gives the little passenger the opportunity to take a nap. Nevertheless, all pushchairs are intended for more or less grown-up kids who are able to sit up independently — that is, not younger than 6 — 8 months.
Also note that in this category there are the possibility of installing a carrycot. In fact, such models are universal (see below); but if the carrycot is not initially included in the delivery, it is customary to classify the pushchair as a pushchair.

— Jogging. A type of pushchairs (see above) designed for parents who value an active lifestyle: a jogging pushchair can be used not only when walking quietly, but also when jogging. Such pushchairs are usu...ally equipped with three wheels of rather large diameter, and also have a large width of the chassis (see below); all this gives additional stability and passability, including on uneven roads. In addition, the design may include specific features for added comfort and safety, such as a strap that fixes the parent's hand on the pushchair handle or an additional brake that activates when the pushchair is released from the hands.

— Universal. Pushchairs often come with at least two (or even three) interchangeable units: a lying carrycot for infants, a seat unit for older babies, and sometimes a Group 0+ car seat. Parents can choose which unit to use on the chassis. This option provides convenience throughout the baby's pushchair years, starting with the carrycot for the first 6-8 months and transitioning to the seat unit. However, these universal pushchairs are pricier and less space-efficient than transformers with similar capabilities. On the flip side, separate carrycots and seat units are more convenient and reliable.
It is worth taking into account that some universal models can be supplied in alternative options — for example, " carrycot + car seat". So, when buying such a pushchair, it does not hurt to specify the set of accessories supplied with it.

— Pushchair-transformer. Transforming pushchairs allow the seat to convert seamlessly from a carrycot to a seat unit and vice versa, offering the same versatility as universal models. Unlike universal pushchairs, transformers don't require rearranging the main unit for this reconfiguration, providing several advantages. Firstly, the main block's format can be changed anytime, even on the go, without the need for separate seat units or carrycots. Secondly, the integrated carrycot takes up less storage space compared to two separate units.

— Classic. Pushchairs that are equipped with carrycots only; some also allow the installation of a seat unit, as in universal models, but if such a unit is not included in the kit, the pushchair is considered a classic. Recall that carrycots are intended mainly for children under 6 – 8 months old, who are not yet able to sit normally in the seat unit; in other words, this type of pushchair is suitable mainly for the smallest kids. That is why the "classic" nowadays is not particularly popular.

The ability to adjust the tilt between the seat and the backrest of the stroller. This helps to find the most comfortable position for the baby and adjust the seat to different situations: for example, at the end of a long walk, the backrest can be tilted back for a tired baby to take a nap.

The ability to adjust the tilt of the main unit relative to the stroller frame. This allows you to adjust the stroller to different situations: for example, at the beginning of the walk, the unit can be installed almost vertically, based on a sitting position, and later tilted back so that the baby can take a nap.

The carrycot carry handle for carrying is mounted on the carrycot and makes it easy to carry it from place to place — for example, if you need to remove the carrycot for cleaning and then put it back. The handle can have a different shape — in the form of an arc attached to the sides of the carrycot, in the form of a hood cutout, etc.

A window made of transparent or translucent material, built into the hood that covers the cradle or seating unit. In the version with a walking block, the viewing window is usually located so that the parent can see the baby directly while moving, without being distracted from controlling the stroller. In cradles, the parent can see the child through a window by approaching the stroller from the side of the hood (that is, on the opposite side of the handle); implementations with a window in the front hemisphere of the hood are less common. In addition, a baby lying in a cradle can usually see the outside world through the window (primarily the sky above the stroller). The viewing window can be made in the form of oilcloth or a mesh mosquito net, through the holes of which air freely penetrates, but insects and small debris raised by the wind are retained.

Possibility to adjust the stroller handle in height. This function allows you to optimally adjust the length of the handle to the height of the parent. It will be especially useful if the parents are of different heights, and each of them regularly carries a stroller.

Typically, height adjustment is carried out by lowering or raising the upper segment of the handle, and in advanced implementations a telescopic mechanism is responsible for it. The retractable handle makes the stroller more adaptable to different situations and conditions. For example, it can be lengthened for more comfortable walking or shortened for ease of use in tight spaces.

The main material from which the frame of the pushchair is made.

— Aluminium. The material used in the vast majority of modern pushchairs of all price categories. This is due to a number of advantages: aluminium is light and at the same time durable, it does not rust and is not afraid of moisture, it lasts a long time, it looks nice, but it is relatively inexpensive — somewhat more expensive than steel, but noticeably cheaper than more advanced materials like carbon.

— Steel. Steel frames are as strong as aluminium frames, and they are much cheaper. On the other hand, they are quite heavy, so steel is used less often in pushchairs.

— Magnesium alloy. Premium Material: Stronger and more durable than aluminium, just as lightweight, but at a significantly higher cost. It is extremely rare, in single models of expensive pushchairs.

— Carbon. Another high-end material: carbon fiber filled with plastic. This combination gives excellent strength - comparable to steel — at a very low weight. However, carbon is very expensive, and these advantages are rarely decisive for pushchairs — in most cases simpler materials are enough. That is why carbon frames have not become widespread.

— Plastic. Plastic itself is easy to manufacture and relatively cheap; it is also not as cold to the hands in cool weather as aluminium or steel. However, modern pushchairs very rarely have frames made of this material. The fact is that low-cost vari...eties of plastic are not strong enough for this; and high-quality varieties cost accordingly - their price is close to aluminium, or even higher.

— Fibreglass. In this context, "fibreglass" typically refers to glass fibers mixed with plastic filler. Unlike conventional window glass, glass fibers are flexible and strong. The plastic filler enhances durability by offering scratch and tear resistance. The result is a material that is lightweight and very strong. However, fibreglass is prone to brittleness, especially with point impacts, and is susceptible to abrasion. As a result, it isn't widely used in pushchairs.

A feature found on models with swivel wheels (see above). Locking allows you to fix such wheels straight, without the possibility of turning to the sides; in some situations — for example, when driving over difficult terrain — locked wheels are more convenient than swivel wheels. And when manoeuvrability is required, the locks can be easily released.

The diameter of the front wheels installed in the stroller.

At the same time, the front wheels are not as important for mobility as the rear wheels: for example, to overcome obstacles, the stroller is often lifted "on its toes" by tilting it towards itself, with only the rear wheels working. Therefore, the diameter of the front wheels may be noticeably smaller than the rear wheels. It should be noted here that the small size also has its advantages — the wheels are lighter.

Speaking of specific numbers, diameter up to 15 cm is considered very modest, 16 — 20 cm — small, 21 — 25 cm — medium, 26 — 30 cm is larger than average and more than 30 cm is large.