Comparison Gerber Gorge Folding Shovel vs Fiskars 131400

— Garden / construction. This kind of shovels can be called classic: speaking of a “regular” shovel, most often they mean a tool of a garden / construction type. Such models have a rather large length, and the shape can be almost any. Among them there are tools for a variety of types of work: digging holes and trenches, throwing loose materials, etc. At the same time, a long handle reduces effort during work, but makes it difficult to transport.

— Tourist / automotive. Shovels of small size, designed primarily for the convenience of carrying in a backpack or transporting in the boot of a car; exactly the tool that is usually called "sapper shovels". Often made folding or equipped with a telescopic handle, many models are equipped with covers for added convenience. Their small size makes it difficult to use such shovels for large-scale work, but they are not designed for such an application — tourist / automobile models are designed to solve simple tasks of a small volume, such as digging out a wheel “buried” in the snow, preparing a hole for a fire, digging tents, etc. P.

— Snowplow. Snow shovels have a large blade width — it is larger than other types of shovels of the same length. The canvas itself in such models is soviet (see below). The length can be different: there are both full-size tools that are not inferior to garden / construction shovels, and...compact ones (60 – 70 cm) suitable for use as tourist or automobile ones.

— Scraper. A specific device used mainly for snow removal. It looks like a very wide (70 – 80 cm) shovel cloth with a U-shaped handle. Such tools differ from snow shovels (see the relevant paragraph) not only in size and design, but also in the way they are used: the scraper is designed not so much for tilting as for raking snow.

— Bayonet. The traditional, familiar to many shape is quite wide, rounded and slightly pointed downwards. Bayonet-type canvases are intended primarily for digging — they easily penetrate fairly dense soil and can even cut the roots; but bayonet shovels are poorly suited for pouring bulk materials.

— Owl. Rectangular canvas, bent up along the edges and set at a certain angle relative to the axis of the handle. Due to this angle, as well as the same width along the entire length (and in some models the blade also expands downwards), shovels are not well suited for digging — sticking such a blade into the ground, even loose, is noticeably more difficult than bayonet. But such tools are indispensable if you need to reload a large volume of loose or viscous materials from one place to another — you can collect a lot of such material at a time, and the bent "sides" of the canvas will to some extent prevent spillage. And snow shovels and scrapers are generally made only with scoops.

— Rectangular. Outwardly, such canvases are similar to the soviet ones described above, however, they do not have “sides” along the edges. Their main purpose is digging loose soils: a rectangular shape allows you to grab more earth than a bayonet, and sticking the blade with great force is not required in such soils. And if necessary, such a tool can serve as an impromptu replacement...for a shovel, although due to the lack of sides, this may require some skill.

— Bayonet rounded. Although such shovels are formally classified as bayonet shovels, they are closest in shape to rectangular ones; the main difference is that in this case the blade is not made even, but somewhat rounded. This makes it easier to work on tight ground, otherwise rounded models do not differ much from rectangular ones.

— Pedigree (chirva). Such canvases got the name "chirva" for their characteristic shape — in the form of a heart, used as a designation of the card suit. Their formal name — "rock" — is due to the fact that such shovels are popular primarily in mining — when loading / unloading rock, coal, crushed stone, etc. At the same time, the pointed shape allows you to easily plunge the shovel into dense heavy materials.

— Drainage. A specific type of canvas, characterized by an elongated shape — the length of such a canvas is 2.5 – 3 times the width; the blade is usually slightly pointed, like a bayonet, and the sides are bent upwards. The name "drainage" comes from one of the most popular uses for such tools — digging narrow and long trenches to drain water. Of course, nothing prevents digging trenches for other purposes — for example, when laying electrical cables for ground lamps or pipes for an irrigation system. In addition, a drainage shovel can be useful when digging up and transplanting individual plants — a long and narrow canvas allows you to dig under the very roots without turning out excess earth and without hitting neighboring plants.

The presence of corrosion protection on the shovel blade.

Usually, we are talking about a special coating that covers the canvas from contact with water and other substances that can lead to rust. Usually such a coating has a characteristic black colour. It is relevant only for shovels made of ordinary steel (see “Blade material”): stainless grades, in accordance with the name, resist corrosion well, and aluminium and plastic are practically not subject to it. Over time, the protective coating can wear out and lose its properties, but anyway, it has a positive effect on the durability of the tool.

The total width of the shovel blade.

The value of this parameter will be different depending on what the shovel is used for — digging, loading / unloading bulk materials or snow removal. In the first case (for example, in bayonet shovels), the width of the pit being dug depends on the size of the canvas. It doesn't always have to be large, and a wide blade experiences more resistance, meaning a large shovel isn't always the best choice. For example, drainage cloths (see "Form") are initially made narrow.

In the second case (shovel shovels), a large width allows you to scoop up more cargo, however, this cargo will weigh accordingly. Therefore, here the difference between different models is most often not very large — most of the canvases have a width in the range of 220 – 260 mm.

In the third case (snow shovels and scrapers), the large width allows you to capture more snow at a time, which is convenient in large open spaces. But for difficult conditions with an abundance of narrow passages and tight nooks and crannies, it is better to choose a narrower tool that can go where a wide canvas does not fit.

— Serrated notch. Most often, this feature is found on bayonet blades (see "Form"), and the teeth can be located both on the front and on the side edge. Anyway, such a notch facilitates cutting — for example, removing weeds or cutting roots.

— Wood. Even inexpensive types of wood are for the most part quite strong and reliable, especially since the stalk can be made quite thick. At the same time, this material is also durable — the service life of a wooden handle is often comparable to the service life of the canvas itself. However compared with steel (see below), such handles are considered less reliable, not least because they are always made removable. On the other hand, a broken or too long / short handle can be easily replaced with a new one. Also, we note that wood has a relatively low thermal conductivity and does not cool hands as much as metal, and in general it is pleasant to the touch.

— Steel. Steel handle, usually, is used in shovels with a blade of the same material (there are exceptions, but extremely rare); moreover, in most cases, such a handle is welded or riveted to the canvas and can only be detached by breaking it off from the tool. The main advantage of steel is its high strength, garden / construction shovels of this type are better suited for work with high loads than tools with wooden handles. In addition, this material is suitable for foldable touring/automobile models (see "Type"). At the same time, steel cuttings are noticeably heavier than wooden ones, and long work with such a shovel requires more strength and endurance. In addition, steel is noticeably more expensive, it is extremely difficult to change su...ch handles (and most often it is simply unjustified), and if the handle breaks, the entire shovel becomes unusable. So it makes sense to specifically look for a full-size shovel with a steel handle, first of all, for complex work, for which the tree may not be reliable enough.

— Aluminium. Another kind of metal cuttings, permanently fixed on the canvas — similar to the steel ones described above. As for the properties, aluminium, on the one hand, is noticeably lighter than steel, on the other hand, it is not so strong and may not be suitable for heavy work.

— Plastic. The main advantages of plastic are lightness and low cost. In addition, it, like wood, does not get too cold hands at low air temperatures, making it excellent for snow removal tools (see "Type"). But full-sized construction / garden shovels with plastic handles are rare and are intended mainly for use where no special loads are planned — the strength of plastic, especially in inexpensive models, is rather low.

— Without a cutting. Shovels that are not equipped with cuttings at all and are sold in the form of a canvas with a shell. The main advantage of this configuration is that the handle can be chosen at your discretion; this is especially useful in cases where standard handles are not suitable for one reason or another (for example, if the user is tall and the stock handles are almost all too short). Most of these models require use with a wooden handle and do not allow other materials; however, this point cannot be called particularly critical.

The type of handle provided in the design of the shovel.

In this case, the handle does not mean the entire handle, but a device at the end of the handle, which you can hold on to while working. Such a device makes the work somewhat more convenient — in particular, holding the tool by the handle, you can avoid turning the handle and unplanned "dumping" of the earth (or other material) from the shovel. However, this detail is far from mandatory.

The most popular are the D-shaped handles — they are considered optimal in terms of convenience, including with great effort. T-handles are much less common: they are simpler in design and better suited for some users, but generally less comfortable.

The ability to quickly fold or disassemble the shovel for storage or transportation. Note that it is technically possible to remove the handle in all shovels with wooden handles (see "Shank material"), as well as many other models; however , such tools are considered collapsible only if they are equipped with quick-release fasteners and can be detached without special tools.

The advantages of folding shovels over clumsy ones are obvious — they are much more convenient to store and transport, especially in hands or a backpack. On the other hand, this design increases the cost of the tool and at the same time reduces its reliability. In addition, making full-size shovels foldable, such as construction or snowplows (see "Type"), most often simply does not make sense. Therefore, this feature is found exclusively in tourist and automotive models, and even then not in all; and specifically looking for a folding shovel makes sense if compactness is more important than strength and suitability for heavy work.

The presence of a specific bend in the handle of a shovel (or in the shell where the handle is inserted). Due to this bend, the canvas is not at the level of the handle, but below (if you hold the shovel horizontally in the working position). It is believed that this ergonomic shape of the shovel somewhat facilitates the performance of certain work — in particular, when digging the soil, you do not have to bend as low as with a shovel without a bend.