Comparison World Vision T625D5 vs World Vision T625A LAN

IPTV service support — broadcasting by the IP protocol, using computer networks (including the Internet).

This feature should not be confused with online TV: in fact, IPTV is a type of cable television, where not an antenna cable is used to transmit the signal, but network equipment. Otherwise, IPTV and cable TV are completely similar: broadcasting is carried out through the operator; the choice of channels is limited by the assortment presented by the operator; and additional charges may apply for access. At the same time, the possibilities of IPTV are much wider than those of traditional cable broadcasting. Most specialized applications have a Time Shift feature (see below); any excerpt of a recently watched broadcast can be re-watched; in addition, it is often also possible to rewind the broadcast to a point in time before the start of viewing (if you turned on such a TV later than you planned). Other features may be provided for additional convenience, such as favorite channel lists, parental guaid, etc.

HDMI is the most common modern interface for working with HD content and multi-channel audio. Video and audio signals with this connection are transmitted over a single cable, and the bandwidth in the latest versions ( HDMI 2.0 and HDMI 2.1) is enough to work with UltraHD resolution and even higher. Almost any modern screen (TV, monitor, etc.) with HD support has at least one HDMI input, which is why most media players and TV receivers have outputs of this type. However, there are also models without HDMI — these are mostly outdated or the most inexpensive solutions that use only analogue video interfaces. There are also models for several HDMI and in most cases one of these ports is for the incoming signal, while the HDMI ports differ in versions.

— v 1.4. The version presented back in 2009, however, does not lose popularity to this day. Supports 4K (4096x2160) video at 24 fps and Full HD at 120 fps; the latter, among other things, allows you to transfer 3D video over this interface. In addition to the original v 1.4, there are also improved versions v 1.4a and v 1.4b, where the possibilities for working with 3D have been further expanded.

-v 2.0. Version released in 2013. Among other things, it introduced the ability to work with 4K video at speeds up to 60 fps, compatibility with ultra-wide format 21: 9, as well as support for up to 32 channels and 4...audio streams simultaneously. HDR support was not originally included in this release, but was introduced in v 2.0a and further enhanced in v 2.0b; media players from this category can support both the original version 2.0 and one of the improved ones.

— v 2.1. 2017 version, also known as HDMI Ultra High Speed. Indeed, it provides a very solid bandwidth, allowing you to work even with 10K video at a speed of 120 fps; in addition, a number of improvements have been made to HDR support. Note that the full use of HDMI v 2.1 is possible only with a special cable, but the functions of earlier versions remain available when using conventional wires.

LAN — connector for wired connection to the Internet and/or local area network using an Ethernet cable. A wired connection is not as convenient as Wi-Fi (see "Multimedia"), but it is considered more reliable and provides faster data transfer speeds. And the speed indicators depend on the device and can be 100 Mbps and 1 Gbps.

The model of the CPU installed in the media player.

This information is mainly of reference value: the processor is selected in such a way as to provide certain practical characteristics (maximum resolution, support for certain standards, embedded applications, etc.). So when choosing, you should focus primarily on these specifications. However, if you wish, knowing the processor model, you can find detailed data on it and evaluate the capabilities of the media centre to work with resource-consuming applications. This can be useful, in particular, if you choose an Android model (see above) and plan to use additional software intensively — the set of applications for this OS is very extensive, and some of them are quite demanding on system resources.

Also note that CPU data is often specified for advertising purposes — to emphasize that the device has a fairly advanced chip from a well-known brand. Among the most common brands of such processors are Allwinner, Amlogic, Rockchip, Realtek.

Codec — from the phrase "Encoder-DECoder" — in this case is the format used for encoding digital video during storage/transmission and decoding during playback (without encoding, video data would take up an unjustifiably large amount of space). Do not confuse this parameter with the format of video files: different files of the same format can be encoded with different codecs, and if the corresponding codec is not supported by the player, video playback will be impossible, even if the file format itself corresponds to the capabilities of the device. And in models with online TV support (see "Features") this nuance also determines compatibility with a specific broadcast: the general format of the broadcast is indicated by the codec used for this.

In general, modern devices usually have quite extensive sets of codecs (one of the most advanced is H.265, AV1 codecis also popular), and there are usually no problems with video playback; in extreme cases, you can use special programs for transcoding files. As for specific codecs, detailed data on them can be found in special sources, but with standard use of media players, such details are not needed.

The set of audio codecs supported by the device

Codec — from the phrase "Encoder-DEcoder" — in this case, the format used for encoding and compressing sound in digital form during storage/transmission and decoding — during playback (digital sound is basically impossible without encoding, and compression allows to reduce the amount of data). Information about supported codecs is relevant primarily for assessing whether the player will be able to work with sound in a particular video file. The fact is that even in video files of the same format (see below), sound can be compressed by different codecs; and if the player supports the file format, but does not support the codec, sound playback will become impossible.

Theoretically, these rules are also relevant for audio files and online broadcasts (all formats — TV, video, audio). However, in fact, when working with such content, you can ignore codec data. So, for each audio file format, usually, its own standard codec is used, and file type support automatically means codec support. Broadcasts usually use generally accepted audio decoders like MPEG-1 or MPEG-2, which are practically guaranteed to be supported by any modern player designed for such broadcasts.

As for specific codecs, detailed information on them can be found in special sources, however, with the standard use of devices, such details are usually not needed.

Remote control included with media center or TV tuner. In addition to the classic remote control with basic controls, there are manipulators with additional features.

— QWERTY keyboard. Such remotes, in addition to the standard set of keys for controlling the player (see above), have an alphabetic keyboard similar to a computer one. This is relevant primarily for media centers with support for social media and photo services — a keyboard with letters is needed at least to enter a login/password.

— With sensors. A kind of remote control that uses sensors instead of classic buttons. Such equipment is somewhat more expensive, on the other hand, the sensors give the remote control a stylish appearance, and in some cases they are more convenient than buttons.

— With voice control. A remote control equipped with a built-in microphone and capable of recognizing a specific set of voice commands. This control format is often more convenient than using buttons/sensors. At the same time, the set of supported commands can be different — sometimes it is quite limited compared to traditional remotes, sometimes vice versa (for example, it may be possible to type text using voice input); these nuances should be clarified separately. It also will be useful to find out the list of supported languages; note that English is almost guaranteed to be on this list, but Russian not always.

- Programmable. A universal rem...ote control that can be configured to work in conjunction with media players, TV tuners and other home electronics. By default, such remote controls are loaded with a database of signal codes for various types of equipment. To activate a specific device, they usually use a certain combination of button presses. Often programmable remote controls have teachable keys, a built-in gyroscope, an air mouse function and other similar options. The programmable buttons on these models are often dedicated to controlling the TV, eliminating the need for multiple remote controls. The service manual for them contains detailed programming instructions from the manufacturer.

— Programmable with voice control. An advanced type of programmable remote controls (see the corresponding paragraph) with a built-in microphone for issuing voice commands. Voice control is fully supported on set-top boxes running Android; together with conventional media players and TV tuners, you can make voice requests by speaking a phrase into the remote control. The exact implementation of voice control varies depending on the remote control model and the receiving device.

— Absent. The absence of a remote control is typical for network media players controlled from other devices — usually from a computer or from a mobile gadget through a special application.